Verizon Pantech UML295 External Antenna Adapter FME

Pantech UML295 external antenna adapter allows you to connect an external cellular antenna to your UML295 to improve cellular signal and boost Internet speeds. (Antenna not included)

This external antenna adapter allows you to connect an external cellular antenna to your Cellular USB Modem to improve cellular signal and boost Internet speeds.

This 18" cable has an FME Male connector on one end and connects to the Verizon Pantech UML295 USB Modem. Connects to any cellular antenna that has an FME Female connector. (Antenna required but not included.)

For best results, attach adapter to bottom port on back of UML295.

WARNING - To purchase this product, you must read this warning and agree to purchase and use this product at your own risk. Although it's rare, using this external antenna adapter can damage your device and void it's warranty. When an external antenna adapter is inserted into the port on your mobile device, your device's antenna is disconnected so that your device can receive signal through an external antenna. When you remove the adapter, your device's antenna should reconnect. If it does not, your device will show a weak or no signal and no service. This means that the switch that connects and reconnects the adapter is damaged or stuck. Despite the adapter manufacturer's testing, some devices may have weak ports and be damaged using this product. Damage may also be caused by pushing adapters in too far, twisting the connector when inserting or removing and by pulling on the adapter cable. As an alternative, we recommend a powered signal booster that does not require a connection through your devices RF port. These signal boosters will perform better than just an antenna directly connected to your device without the risk of plugging in an antenna adapter.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov