Antenna Mounts

Antenna Mounts

Cellular Antenna Mounts

Mounting an antenna can sometimes be a challenge. Many times antenna mounting is the toughest part of an installation. The best place to install a cellular antenna is the side of the building that gets the best signal. If you are mounting a directional antenna, for use with a booster system, point it away from the building. Don't direct it across the building increasing the chance of oscillation. On buildings, the best option is usually a pole mount. Attach the pole up high to the side of the building then your antenna to the pole. Magnetic mounts are the most versatile. They usually work best in vehicles that usually have a metal surface that the magnet can adhere too. Magnetic mounts can be used in home or office. Place the antenna on a metal surface that provides a ground plane to bounce the signal. Consider a filing cabinet, cookie sheet, or another metal surface. We also have a suction cup window mount for mounting magnetic based antennas. Mount them to a window inside your home or office.

Here is our listing of antenna bracket mounts, pole mounts, side mounts, hole NMO mounts and more.

Antenna Mounts

  • Larsen NMO High Frequency Magnetic Antenna Mount

    Larsen NMO High Freq Magnetic Antenna Mount With Cable FME Female

    Larsen

    $47.99
    Larsen NMO Magnetic Mount Base & Cable. Use with High Frequency NMO Mount Antennas. Also works with normal / low frequency NMO antennas. Comes with attached FME Female connector. Screw on Adapters are available (See Below)...
    SKU:
    AM320144
    Short Description:
    Larsen NMO Magnet Mount Base With Cable. FME Female Connector. Use with NMO (High Frequency) Antennas or Normal NMO Antennas.
    $47.99
  • Larsen NMO HF Magnetic Antenna Mount, Cable, SMA Male

    Larsen NMO High Frequency Magnetic Antenna Mount w/Cable SMA M

    Larsen

    $44.99
    Larsen NMO Magnetic Mount Base & Cable. Has attached SMA Male connector. Use with High Frequency NMO Mount Antennas. Also works with normal / low frequency NMO antennas.  Features Larger (3.5" Diameter) Magnetic Base for More Secure Hold 12...
    SKU:
    AM340321
    Short Description:
    Larsen NMO Magnet Mount Base With Cable.
    SMA Male Connector.
    Use with NMO (High Frequency) Antennas or Normal NMO Antennas.
    $44.99
  • Wilson 901117 Wall Pole Antenna Mount Assembly Wilson 901117 Wall Pole Antenna Mount Assembly

    Wilson 901117 Wall Pole Antenna Mount Assembly

    Wilson Electronics

    $22.99
    Wilson antenna wall pole mount assembly. Mount kit includes cylinder post, U-Bolt and mounting bracket. Holds smaller stamped yagi antennas securely. 901117 Post length: 10 inches Post Diameter: 1.5" Material: Aluminum Bracket positions post 2"...
    SKU:
    AM901117
    $22.99
  • Wilson 901140 Ceiling Mount For Panel Antennas

    Wilson 901140 Ceiling Mount For Panel Antennas

    Wilson Electronics

    $9.99
    Ceiling mount for Wilson Panel Cellular Antennas Permanent and fixed ceiling mount that works with Wilson, WilsonPro and weBoost Panel Antennas 304451, 304471, 311155, 304472. (Antenna Not Included) The mount is plastic with pre drilled mounting...
    SKU:
    AM901140
    $9.99
  • Wilson 901141 Window Mount For Panel Antennas

    Wilson Electronics

    MSRP: $19.99
    $16.99
    Suction Cup Window Mount For Wilson Electronics Panel Cellular Antennas. Panel Antenna Not Included. 901141. This mount is made for Wilson Panel Cellular Antennas. Uses suction cups to stick to your window. Great mounting option when you cannot get the...
    SKU:
    AM901141
    MSRP: $19.99
    $16.99
  • Wilson Pole Mount For Panel Antennas 901142

    Wilson 901142 Pole Mount Assembly For Panel Antennas

    Wilson Electronics

    MSRP: $19.99
    $18.99
    Pole Mount For Wilson Electronics & weBoost Panel Antennas. Panel Antenna Not Included. 901142 Mount your Panel Antenna to a Metal or PVC Pipe. Comes With L-Bracket, U-Bolt, Bracket & Nuts Machine Screws & Washers to Connect Antenna to...
    SKU:
    AM901142
    MSRP: $19.99
    $18.99
  • Wilson 901143 Wall Mount For Panel Antenna

    Wilson 901143 Wall Mount For Panel Antenna

    Wilson Electronics

    MSRP: $9.99
    $7.99
    Wall mount for Wilson Panel Cellular Antennas (Antenna Not Included) 901143. This is a metal wall bracket and antenna bracket with pre drilled mounting holes, sheet rock anchors and screws. Mount your panel antenna on a wall and radiate the cell signal...
    SKU:
    AM901143
    MSRP: $9.99
    $7.99
  • Wilson Building Antenna Mount Bracket 901133 (No Antenna)

    Wilson Building Antenna Mount Bracket 901133 (No Antenna)

    Wilson Electronics

    $19.99
    Replacement building antenna mount kit. For Wilson Building cellular antennas. Mount kit includes L Bracket, U-Bolt and 4 wood screws. This kit is included with Wilson Building Antenna. Works with Wilson Building Antennas 301202 and 301201. Antenna not...
    SKU:
    AM901133
    $19.99
  • Wilson Dome Antenna In-Ceiling Mount 901125 Wilson Dome Antenna In-Ceiling Mount Bracket

    Wilson Dome Antenna In-Ceiling Mount Bracket

    Wilson Electronics

    MSRP: $17.99
    $12.99
    Wilson Dome Antenna mount. Mounts your antenna between ceiling joist for an in ceiling mount. Wilson Dome Antenna In-Ceiling Mount Kit Mount your Dome antenna above the ceiling wall between ceiling joist with this In-Ceiling mount. Includes mounting...
    SKU:
    AM901125
    MSRP: $17.99
    $12.99
  • Wilson Marine Antenna Mount

    Wilson Electronics

    MSRP: $24.99
    $19.99
    Flat surface mount for Wilson (weBoost) Marine Antennas 301130 & Marine Antenna 311130. Adjustable. Adjustable. For use with the Marine Antenna to mount on various surfaces. Standard 1 inch x 14 threaded Mount
    SKU:
    AM901119
    MSRP: $24.99
    $19.99
  • Wilson NMO 3/4in Hole Antenna Base 14ft Cable SMA M

    Wilson Electronics

    MSRP: $19.99
    $17.99
    Wilson Electronics 3/4 inch hole, standard NMO mount with 14' cable with SMA Male connector. For antenna whips with NMO type mount. Antenna not included. 901150 (formerly 901102 FME version) Wilson Electronics antenna 3/4 in hole, NMO base with cable...
    SKU:
    AM901150
    MSRP: $19.99
    $17.99
  • Wilson NMO 3/8in Hole Antenna Mount 14ft Cable SMA M

    Wilson Electronics

    MSRP: $19.99
    $17.99
    Wilson Electronics 3/8 inch hole, standard NMO mount with 14' cable with SMA Male connector. For antenna whips with NMO type mount. Antenna not included. 905814 (Formerly 901103 FME) Wilson Electronics antenna hole mount base with cable. This cable...
    SKU:
    AM905814
    MSRP: $19.99
    $17.99
  • Wilson Panel Antenna Wall Mount Assembly

    Wilson Panel Antenna Wall Mount Assembly

    Wilson Electronics

    MSRP: $39.99
    $29.99
    Mount your Wilson Panel antenna inside a wall. Front panel is removable after installation. Wilson Panel Antenna In-Wall Mounting Kit Mount your Panel antenna inside a wall. Front panel is removable after installation. Features paintable cover. Mount,...
    SKU:
    AM901123
    MSRP: $39.99
    $29.99
  • Wilson Trucker 3 Way Mount 901104

    Wilson Trucker 3 Way Mount (3/8 x .24 thread)

    Wilson Electronics

    MSRP: $14.99
    $13.99
    Wilson Trucker Antenna 3 Way Mount. 3/8-24 male thread mount. 5 millimeter chrome-plated aluminum. Fits round poles up to 1 inch in size. Compatible with Wilson Cellular Trucker Antennas (301101) and (301133) 3/8-24 thread 5 millimeter chrome-plated...
    SKU:
    AM901104
    MSRP: $14.99
    $13.99
  • Suction Cup Window Antenna Mount Suction Cup Window Antenna Mount

    Window Mount for Wilson Magnetic Antennas

    Wilson Electronics

    MSRP: $11.99
    $9.99
    Convenient Antenna Mount with suction cups for window mounting. Works with Wilson Magnet Mount Antennas. (Antenna Not Included) This antenna mount uses 2 suction cups to attach to window glass or other smooth surface. Dim: 3 in. Tall x 1.25 in. Wide...
    SKU:
    AM901128
    MSRP: $11.99
    $9.99
  • Wilson Remount Kit For Glass Mount Antennas 991115

    Wilson Electronics

    Glass Mount Antenna Remount Kit. For Wilson Glass Mount Antenna (301102) or Mini Glass Mount Antenna (301114). The package comes with: Alcohol pad, 3M VHB Adhesive strips for inside and outside.
    SKU:
    AM991115
    Short Description:
    Remount Kit for Wilson Glass Mount Antennas.