- Building Systems
- Mobile Systems
- M2M 4G Internet
- Phone Accessories
The WilsonPro 70 Plus SELECT Cellular Signal Booster for Commercial Buildings. It offers maximum in-building coverage area. This SELECT version of the WilsonPro 70 Plus comes with Adjustable Uplink and Downlink Controls. It features the highest downlink power of any FCC certified signal booster on the market. This downlink power enables these cellular amplifiers to provide more in-building coverage than, even its closest competitor.
The WilsonPro 70 Plus Select amplifies weak cellular signals and redistributes them to cover larger indoor spaces. It provides reliable voice and data service - including 4G LTE - inside homes and other buildings where signals blocked by concrete, steel, and other materials. Like all of our 4G products, the new 50 Ohm Boosters support all bands and major carriers in North America. These professional-grade kits feature N-type connectors and Wilson 400 coax cable and include an industry-leading three-year warranty.
The WilsonPro 70 Plus Select has the same great features as with Pro 70 Plus but adds the ability to adjust uplink and downlink power. Like the WilsonPro 70 Plus, it has the highest downlink power compared to its closest competitor. It can get a better signal from further away. It features a self-optimizing microprocessor with a built-in graphical signal meter. It will provide full coverage when other amplifiers power down because of an outside signal that is too strong. The Pro 70 Plus continues at full power with a signal as strong as -58db. Most amplifiers power down with a signal of -65db or greater.
1 - WilsonPro 70 Plus Cellular Amplifier
1 - 314411 - Wide Band Directional Antenna
1 - 311135 - Dual Band Panel Antenna
1 - 859902 - Lightning Surge Protector & 2ft Patch Cable 952302
1 - 952360 - 60ft Low-Loss Wilson 400 Cable
1 - 952375 - 75ft Low-Loss Wilson 400 Cable
1 - 859900 - 120v AC Power Supply
The WilsonPro 70 Plus SELECT Building Repeater Systems is not sold online. Call or Email us for help, to purchase or to get a free quote. We would be happy to help you design the best system for your installation.
The Professional Series features a self-optimizing microprocessor and built-in graphical signal meter to minimize install time. The uplink and downlink power display makes it easy to determine the direction of the cell tower and the strength of the available signal while the self-optimizing design eliminates the need for troubleshooting.
|Frequency||Band 12/17||700 MHz|
|Band 13||700 MHz|
|Band 5||850 MHz|
|Band 4||1700/2100 MHz|
|Band 2||1900 MHz|
|Max Gain||70 dB|
|Power Req||AC/DC 12 V / 3 A|
|Dimensions||8.875 x 6.0 x 1.5 in /
22.5 x 15.2 x 3.8 cm
|Weight||2.81 lbs / 1.27 kg|
Call us for more information.
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.