- Building Systems
- Mobile Systems
- HotSpot · Router · Modem
- Phone Accessories
Extenal Antenna Adapter for AT&T Unite & Unite Pro, Netgear 770S/781S. Adapter cable has device connector on one end and FME Male connector on the other. This kit includes a screw on adapter to convert the FME connector to a SMA Female connector. Use to connect external antennas or power boosters with SMA Male connectors.
Boost the signal to your AT&T Unite or AT&T Unite Pro mobile hotspot by adding an external antenna.
IMPORTANT NOTE: The AT&T Unite / Sierra Wireless AC770S Mobile Hotspot has 2 antenna ports. Either port can be used with no difference in performance between the 2. For maximum signal gain and performance both ports can be used (Note: you will need 2 separate antennas and adapters to use both ports).
External Antenna required but not included. See AT&T Unite Bundle for Antenna Options.
Cable Length: 18 inches.
WARNING - To purchase this product, you must read this warning and agree to purchase and use this product at your own risk. Although it's rare, using this external antenna adapter can damage your device and void it's warranty. When an external antenna adapter is inserted into the port on your mobile device, your device's antenna is disconnected so that your device can receive signal through an external antenna. When you remove the adapter, your device's antenna should reconnect. If it does not, your device will show a weak or no signal and no service. This means that the switch that connects and reconnects the adapter is damaged or stuck. Despite the adapter manufacturer's testing, some devices may have weak ports and be damaged using this product. Damage may also be caused by pushing adapters in too far, twisting the connector when inserting or removing and by pulling on the adapter cable. As an alternative, we recommend a powered signal booster that does not require a connection through your devices RF port. These signal boosters will perform better than just an antenna directly connected to your device without the risk of plugging in an antenna adapter.