weBoost
weBoost Connect 4G Building Cellular Signal Booster Home Office 470103 *DISCONTINUED
- SKU:
- AP470103
- UPC:
- 811815024521
- MPN:
- 470103
- Condition:
- New
- Availability:
- No Longer Available
- *** Discontinued ***:
 
Replaced By the weBoost Home MultiRoom Signal Booster System 470144
Description
This System Has Been Discontinued -- Replaced By the weBoost Home MultiRoom Signal Booster System
-------------------------------------------------------------------------------------------------------------
Features:
• Ideal for Homes, Small Offices & Workspace
• Covers up to 5,000 Sq. Ft. With A Strong Signal Outside.
• Boost Voice Plus 3G & 4G Internet Signals
• Works For AT&T, Verizon, T-Mobile, Sprint & Others
• Works With Multiple Devices
• High Gain Directional Outdoor Antenna
weBoost Connect 4G Signal Booster System
The weBoost Connect 4G™ Home & Office cellular signal booster is the ideal system for midsized areas such as small to medium sized homes, small offices, mobile homes, portable buildings, etc. It is a simple, practical solution to maintaining continuous communication with all cellular-enabled devices including, cell phones, iPhone, BlackBerry, smartphones, tablets, Hotspots, MiFi devices, cellular data USB cards, cellular routers, etc.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Service Providers Covered
The weBoost Connect 4G covers all carriers in the United States using 800 MHz and 1900 MHz for phone calls as well as 3G Internet. It also covers most 4G frequencies.
- All Carriers In The US Using - 800 MHz, 1900 MHz, 3G Internet
- AT&T 4G 700 MHz LTE
- Verizon 4G 700 MHz LTE
- T-Mobile 4G 1700/2100 MHz
- Sprint 1900 MHz G
For T-Mobile 4G 700 MHz, consider the weBoost Connect 4G-X system.
Note: Does not improve WiMax 2500 MHz frequency or iDen Networks.
Coverage Area
How Much Indoor Area Signal Improvement Will This Signal Booster Provide?
With a very good signal outdoors (at the outdoor antenna location), this signal booster will cover up to 5,000 sq ft indoors. The amount of indoor coverage area is dependent on the outside signal strength. The stronger the outdoor signal, the more indoor area coverage. Like all signal booster systems, this system requires the outdoor antenna to be placed in an area where there is a good consistent signal in order to get the most improved signal coverage area indoors.
Estimated Coverage Area For This System Configuration
Signal Strength | Estimated Indoor Coverage Area |
-100 db (1-2 Bars) | 1,000 sq ft |
-90 db (3-4 Bars) | 3,500 sq ft |
-80 db (5 Bars) | 5,000 sq ft |
How To Get The Best Coverage
The key to getting the best indoor signal coverage, is getting the outdoor antenna to where the signal is best. The stronger the outdoor signal, the larger the coverage area indoors. If your signal is 2 bars or less and fluctuates downward a lot, you will not get much coverage on the inside. In this case your phone will need to be very close to the indoor antenna to see signal improvement.
For Larger Homes & Commercial Buildings - consider the WilsonPro Signal Booster Systems.
We can help you select the best system for your building. Feel free to Contact Us with your requirements.
Also See: Estimating Coverage Area
Directional Antenna Advantage
This Connect 4G system comes with an outdoor directional antenna. The advantage of a directional antenna is it has a higher gain directed towards your cell service provider tower. It's especially useful for 4G frequencies and is the best solution for 4G Internet.
Includes:
- weBoost Connect 4G Amplifier
- Outdoor WideBand Directional Antenna With U-Bolt Pole Mounting Bracket
- Indoor Panel Antenna With Wall Mount Bracket
- 1 - 30 ft RG-6 Quad Shield Cable
- 2 - 15 ft RG-6 Quad Shield Cable
- 1 - 8 in Flat Window Entry Cable - Thin cable for routing through slim openings like windows and doors.
- AC Wall Power Supply
- Installation Guide
More weBoost Connect 4G Configurations, Components and Accessories.
Benefits:
- Stronger cell signal inside home or work area
- Stay In Touch - fewer dropped calls & lost connections
- Faster 4G Internet speeds
- Increase battery life with a stronger signal - Up to 2 hours longer talk time
Installation
Installing the Connect 4G Directional is easy and straightforward. You can install with minimal tools.
- Install Outside Antenna & Point Towards Your Service Providers Tower
- Install Inside Antenna & Point Towards the Area You Want to Cover.
- Connect Cable from Amplifier to Outside Antenna
- Connect Cable from amplifier to Inside Antenna
- Connect Amplifier Power Supply
A step-by-step installation guide and video will walk you through the process. The antennas communicate with both cellular devices and your service provider's cell tower for the strongest, most powerful signal possible.
Documents
weBoost Connect 4G Building Cell Phone Signal Booster Specifications
Kit Model Number | 470103 | ||||
Amplifier Model Number | 470003 | ||||
Connectors | F Female | ||||
Antenna Impedance | 75 Ohms | ||||
Frequency | 704-746 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz, 1710-1755/2110-2155 MHz | ||||
Passband Gain (nominal) |
700 MHz 57.3 dB |
700 MHz 55.0 dB |
800 MHz 57.2 dB |
1700/2100 MHz 60.5 dB |
1900 MHz 57.0 dB |
|
|||||
20 dB Bandwidth (MHZ) Typical |
700 MHz 26.2 |
700 MHz 26.7 |
800 MHz 38.9 |
1700/2100 MHz 73.5 |
1900 MHz 78.4 |
Maximum Power |
|||||
Power output for single cell phone (Uplink) dBm |
700 MHz 23.7 |
700 MHz 23.6 |
800 MHz 24.6 |
1700/2100 MHz 24.9 |
1900 MHz 23.3 |
Power output for a single cell phone (Downlink) dBm |
700 MHz .9 |
700 MHz -1 |
800 MHz 2.1 |
1700/2100 MHz 5.8 |
1900 MHz 6.1 |
Power output for multiple received # Phones |
700 MHz Band 17 |
700 MHz Band 13 |
800 MHz Band 5 |
1700/2100 MHz Band 4 |
1900 MHz Band 2 |
2 | 21.3 | 20.7 | 23.0 | 19.9 | 18.1 |
3 | 17.7 | 17.2 | 19.4 | 16.4 | 14.6 |
4 | 15.2 | 14.7 | 16.9 | 13.9 | 12.1 |
5 | 13.3 | 12.8 | 15.0 | 11.9 | 10.2 |
6 | 11.7 | 11.2 | 13.4 | 10.4 | 8.6 |
Power output for multiple received # of Phones |
700 MHz Band 17 |
700 MHz Band 13 |
800 MHz Band 5 |
1700/2100 MHz Band 4 |
1900 MHz Band 2 |
2 | .2 | -3.2 | 1.8 | -.05 | -2.2 |
3 | -5.6 | -6.7 | -1.7 | -4.1 | -5.8 |
4 | -8.1 | -9.2 | -4.2 | -6.6 | -8.3 |
5 | -10 | -11.2 | -6.1 | -8.5 | -10.2 |
6 | -11.6 | -12.8 | -7.7 | -10.1 | -11.8 |
Noise Figure | 7 dB nominal | ||||
Isolation | > 110 dB | ||||
Power Requirements | AC / DC 5V, 2.5A, w/2 5x5.5mm Jack |
Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1 minute. After 5 (five) such automatic restarts, any problematic bands are permanently shut off until the Signal Booster has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity are maintained by the Signal Booster’s
microprocessor.
The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator.
Not For Shipment or Use Outside the U.S.
Unfortunately All weBoost and WilsonPro Signal Booster Systems can only be shipped and used within the United States. weBoost or WilsonPro products certified by the U.S. Federal Communications Commission (FCC) are no longer recognized by Industry Canada (IC) to be certified for use in Canada and cannot be used or shipped to Canada. There are specific version of Canadian Approved (IC) than can be used. Please contact a weBoost or WilsonPro dealer in your country for these systems.
THIS IS A CONSUMER DEVICE.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING.
E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards
4 Reviews
-
Trouble with instillation
You need to be some kind of engineer to understand the instillation instructions.
-
Works great, easy to install
Will purchase again if needed
-
Connect 4G
Great product. We had no signal inside our metal building. Now we have cellular and internet signal. Instructions are easy to follow.
-
Timothy Martin
It works as advertised. We are pleased. We have a metal roof so without this we were hanging in the windows trying to receive service. Now it’s as if we don’t have a metal roof. Service booster may even make our service better.