Huawei E368 Sierra Wireless 754S Elevate Force Ext Antenna Adapter Kit
- In Sock - Usually Ships In 24 Hours
Antenna Kit for the Sierra Wireless 754S Elevate & Force, Huawei E368 Internet card. Includes Wilson 3db Magnet Mount Antenna and External Antenna Adapter for Sierra Wireless 754S Elevate, Force, Also connects to other devices with TS-9 RF ports. Boost the cell signal to your cellular Internet device, with the external antenna kit. A better cell signal can mean faster Internet speeds.
These hotspots usually have 2 flip open ports to connect the antenna. Use 1 port for one antenna or use both ports (2 adapters and 2 antennas) for LTE MIMO capability.
Antenna Kit Includes:
- Wilson 3db Magnetic Mount Antenna
- Sierra Wireless 754S Elevate & Force, Huawei E368 External Antenna Adapter (18")
Wilson Magnetic Mount Cellular Antenna
The antenna is about 12 inches tall and includes a small magnetic base. It comes with 10 feet of cable and has an FME Female connector.
Works with Huawei E368, Sierra Wireless 754S Elevate Force, Sierra Wireless AirCard 890, Sierra Wireless AirCard 890 & AirCard 802S Hotspot, Overdrive & Overdrive Pro. Also connects to other devices with TS-9 RF ports Including AirCard 402, (AC402), AirCard 403 (AC403) AirCard 503 (AC503), 2-in-1 PC Card and ExpressCard.
WARNING - To purchase this product, you must read this warning and agree to purchase and use this product at your own risk. Although it's rare, using this external antenna adapter can damage your device and void it's warranty. When an external antenna adapter is inserted into the port on your mobile device, your device's antenna is disconnected so that your device can receive signal through an external antenna. When you remove the adapter, your device's antenna should reconnect. If it does not, your device will show a weak or no signal and no service. This means that the switch that connects and reconnects the adapter is damaged or stuck. Despite the adapter manufacturer's testing, some devices may have weak ports and be damaged using this product. Damage may also be caused by pushing adapters in too far, twisting the connector when inserting or removing and by pulling on the adapter cable. As an alternative, we recommend a powered signal booster that does not require a connection through your devices RF port. These signal boosters will perform better than just an antenna directly connected to your device without the risk of plugging in an antenna adapter.