null
AlternativeWireless.com

Verizon AC791L Antenna - Mini External Antenna Plus Adapter Cable Kit

(No reviews yet) Write a Review
SKU:
AK1061-301113-AC791
MPN:
AK1061-301113-AC791
Condition:
New
Availability:
OUT OF STOCK
  • Verizon AC791L Magnetic Mount 4G Mini Antenna
  • Verizon AC791L Antenna - Mini External Antenna Plus Adapter Cable Kit

Out of Stock

Description

4G Mini External Antenna + Adapter Kit - Fits Your Verizon AC791l Hotspot

Verizon AC791L Hotspot 4G Antenna PLUS TS-9 Cable Adapter - fits your Verizon AC791L HotSpot. Improve the cellular signal to your Verizon AC791L Jetpack MiFi device with this external antenna kit. (Antenna Only - Does Not Include Hotspot)

How To Use

To use this external antenna is easy. The antenna adapter that comes in this kit plug into one of your hotspot's RF / Test port.

  • Turn Off Your Verizon AC791L Hotspot. 
  • Place the Antenna In An Area With The Best Cell 4G Signal - Near an Outside Window, Outside Wall, Vehicle Roof, Outdoors) 
  • Attach the External Antenna Adapter to the Antenna Cable. 
  • Carefully Plug the External Antenna Adapter into the RF / Test port on Your Hotspot. * Attach gently and never force adapter on.

* See Warning Below

Antenna Placement

The goal is to place the antenna where you receive the strongest cellular 4G signal. This is usually on a window or outside wall. For vehicles, mount the antenna outside, on the metal roof. For Best Results, place the antenna on a metal surface such as a vehicle roof, metal file cabinet, cookie sheet, small metal plate, etc.

2 Antenna Test Ports?

If your Hotspot has 2 Antenna Test Ports, using 2 of these Antenna Kits placed a foot or more apart may give you a more consistent signal. 

4G Antenna Kit Includes:

  • Wilson 4G Mini Magnetic Mount Antenna With 10 Foot Cable
  • Verizon AC791L Hotspot External Antenna Adapter Cable (18 Inches)

prop 65 symbolWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

* WARNING - PLEASE READ 

To purchase this product, you must read this notice and agree to buy and Use this Product at Your Own Risk.

Although it's rare, using this external antenna adapter can damage your device and void its warranty. When an external antenna adapter is inserted into the port on your mobile device, your device's antenna is disconnected so that your device can receive a signal through an external antenna. When you remove the adapter, your device's antenna should reconnect. If it does not, your device will show a weak or no signal and no service. No signal could indicate that the switch that connects and reconnects the adapter is damaged or stuck. Despite the adapter manufacturer's testing, some devices may have weak ports and be damaged using this product. Damage may also be caused by pushing adapters in too far, twisting the connector when inserting or removing and by pulling on the adapter cable.

As an alternative, we recommend a powered signal booster that does not require a connection to your devices RF port. These signal boosters will perform better than just an antenna directly connected to your device without the risk of plugging in an antenna adapter.

About The Wilson 4G Antenna

The Wilson Magnet Mount 4G Mini Antenna was carefully designed to minimize loss and maximize gain in 700MHz, 800 MHz, 1900 MHz and 2100MHz bands. It is about 4 inches tall and includes a small magnetic base. It comes with 10 feet of cable.

Antenna Specifications:

  • Frequency: 700-800 MHz - Gain: 1.7 dBi
  • Frequency: 824-894 MHz - Gain: 2.12 dBi
  • Frequency: 880-960 MHz - Gain: 0.5 dBi
  • Frequency: 1710-188 MHz - Gain: 2.2 dBi
  • Frequency: 1850-1990 MHz - Gain: 3.1 dBi
  • Frequency: 2110-2170 MHz - Gain: 1.4 dBi
  • Impedance: 50 ohms
  • Radiation: Omni
  • Polarization: Vertical
  • Ground Plane: Metal ground plane required
  • Connector: SMA Male
  • Material: Whip - Plastic Coated Steel Wire
  • Coax Cable: RG174 - 12 feet
  • Height: 4.175 inches
  • Mount: Rare earth magnet
View AllClose