- M2M Internet
- Cell Phone Accessories
The Wilson Electronics (weBoost) SignalBoost DB Pro Dual Band cellular repeater greatly improves signal strength for any cellular device inside a building on most networks. It does not require any physical connection to your phone allowing you to walk around freely during a call. It even allows multiple cell phones and/or Data Cards to be used simultaneously.
The DB Pro™ is a bi-directional amplifier that deliver service levels consistent with what would be expected in areas of high cell network coverage. It can amplify a weak or shadowed cellular signal and repeat it inside a building.
How The DB Pro Works
When using the DB Pro amplifier in conjunction with Wilson antennas, the outside antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then amplified and broadcast from the inside antenna to the surrounding area. Cell phones, Hotspots / MiFi devices and cellular data cards can that area then communicate with the improved signal. When a cell phone or cellular device transmits, the signal is received by the inside antenna, amplified by the amplifier and broadcast back to the cell tower through the outside antenna.
Adjustable Gain Controls
The benefit of adjustable gain is that the DB Pro can be configured to cover large or medium sized areas. An installation challenge of in-building signal boosters is getting enough separation between the inside antenna and outside antenna to prevent oscillation between the two antennas. Oscillation will prevent the system from working properly. The installer is usually faced with several fixed gain amplifier options. For example, in a small building, with a good outside signal, it may be difficult to get 25-50 feet of antenna separation required to prevent oscillation. With a Wilson adjustable gain amplifier, you can adjust the gain downwards to get the strong cell coverage you need, without oscillation.
The DB Pro is very versatile and can be configured to work in many different types of buildings. The DB Pro has been used in Homes, Offices, Warehouses, Fire Stations, Command Posts and many other building types. The Wilson SignalBoost DB Pro offers DIY installation. All components are interconnected using standard TV cable (Quad Shield RG-6) which is easily available and often found already installed, simplifying cable runs.
The DB Pro Kits are available with 2 different types of outside antenna - Directional and Omni-Directional.
Omni-Directional Antenna Kit Option - Used to capture signal from any direction from multiple service providers towers in the area. If you are trying to capture multiple service providers and their cell towers are in opposite directions, use an Omni-Directional antenna.
Directional Antenna Kit Option - Higher gain / stronger antenna used to capture the most signal from ONE direction, point this antenna towards your service providers tower. Gets the best signal but in one direction.
We stock Wilson DB Pro system components & parts like indoor and outdoor antennas, connectors, adapters, coax cables, splitters, combiners, taps and other accessories. We list them below. If you can't find what you need or need expert advice, feel free to contact us.