Franklin Sprint U600 2G/3G Port Antenna 20 In Adapter FME M
- In Stock - Usually Ships In 24 Hours
- Short Description:
- 20 Inch Antenna Adapter
Franklin Wireless Sprint U600 antenna adapter that fits U600 2G/3G port. 20 inch cable attaches an external antenna directly to your Sprint U600 modem. FME Male connector. AA1091
Sprint U600 antenna adapter for 2G/3G port. Attach an external antenna directly to your Sprint U600 modem made by Franklin Wireless. Attaches to an external antenna with an FME Female connector.
Connects to 2G/3G antenna port on the Franklin Wireless Sprint U600 cellular modem.
Length: 20 inches
Note that the Franklin Wireless U600 modem has one 2G/3G port and a seperate 4G port. The 4G port requires a different adapter (Part # AA1025) not included.
WARNING - To purchase this product, you must read this warning and agree to purchase and use this product at your own risk. Although it's rare, using this external antenna adapter can damage your device and void it's warranty. When an external antenna adapter is inserted into the port on your mobile device, your device's antenna is disconnected so that your device can receive signal through an external antenna. When you remove the adapter, your device's antenna should reconnect. If it does not, your device will show a weak or no signal and no service. This means that the switch that connects and reconnects the adapter is damaged or stuck. Despite the adapter manufacturer's testing, some devices may have weak ports and be damaged using this product. Damage may also be caused by pushing adapters in too far, twisting the connector when inserting or removing and by pulling on the adapter cable. As an alternative, we recommend a powered signal booster that does not require a connection through your devices RF port. These signal boosters will perform better than just an antenna directly connected to your device without the risk of plugging in an antenna adapter.