Mounts

Replacement Spring For weBoost / Wilson OTR Truck Antenna 304415. Fits Wilson 304415 OTR Antennas only. Spring base only. ** Antenna Not Included. Wilson Part #: 901115

Antenna Mounting BracketL-Bracket Outdoor Antenna Mount Designed to mount an outdoor antenna directly to the J-bar mounting pole (pole not included), this L-bracket with U-bolt hardware securely attaches to a pole up to 1.5" in diameter. Mounts...

SureCall Antenna Mounting PoleJ-Bar Pole Mount For Outdoor Antennas The SureCall Antenna Mounting Pole is adjustable 20". The universal mounting pipe allows you to position your exterior antenna higher for optimal reception. The mounting pole comes...

Wilson antenna wall pole mount assembly. Mount kit includes cylinder post, U-Bolt and mounting bracket. Holds smaller stamped yagi antennas securely. 901117 Post length: 10 inches Post Diameter: 1.5" Material: Aluminum Bracket positions post 2"...

Wilson's Cradle Antenna 301146. Cable has SMA Male Connector and comes with an FME Female Adapter. For use with a powered cellular signal booster (not included) that has an FME Male connector for indoor antenna. Enables you to place your cell phone...

Wilson's Cradle Antenna 301148 with SMA Male connector. For use with a powered cellular amplifier such as the weBoost Drive 4g-X, Drive 4G-M or other Mobile Wireless Vehicle Amplifiers. Powered signal booster to boost signal (not included). Wilson Cell...

Wilson Antenna Mounting Pole The Wilson Antenna Pole is designed primarily to work with RV applications but can also be used for mounting outdoor antennas on the side of buildings. The pole extends out to 25 feet. This pole is compatible with the...

These Wall Mount Brackets (qty. 2) are used to secure the mast (that comes with the weBoost Connect RV65) to side of RV. These mounts are included in the weBoost Connect RV65 Signal Booster Kit. These are useful for those that want to have the...

Larsen 3/4 inch hole, High Frequency (0-6 GHz) NMO mount. Includes attached 17 foot RG-58U cable with SMA Male connector. Fits antennas with High Frequency or Standard NMO type base. Antenna not included.  The Larsen NMOKHFUDSMAI vehicle roof mount...

Ceiling mount for Wilson Panel Cellular Antennas Permanent and fixed ceiling mount that works with Wilson, WilsonPro and weBoost Panel Antennas 304451, 304471, 311155, 304472. (Antenna Not Included) The mount is plastic with pre drilled mounting...

Suction Cup Window Mount For Wilson Electronics Panel Cellular Antennas. Panel Antenna Not Included. 901141. This mount is made for Wilson Panel Cellular Antennas. Uses suction cups to stick to your window. Great mounting option when you cannot get the...

Pole Mount For Wilson Electronics & weBoost Panel Antennas. Panel Antenna Not Included. 901142 Mount your Panel Antenna to a Metal or PVC Pipe. Comes with L-Bracket, U-Bolt and mounting hardware.

Wall mount for Wilson Panel Cellular Antennas (Antenna Not Included) 901143. This is a metal wall bracket and antenna bracket with pre drilled mounting holes, sheet rock anchors and screws. Mount your panel antenna on a wall and radiate the cell signal...

Use your Wilson cradle signal booster on your desktop with this Wilson adjustable desk top cradle mount. This adjustable desktop holder mount works with Wilson Phone Cradles, Wilson SignalBoost Professional Amplifiers and Wilson Cradle Boosters (Wilson...

Wilson Booster Cup Holder Wilson suction cup adjustable holder mount works with Wilson Phone Cradle, Wilson SignalBoost Professional Amplifier and Wilson Cradle Boosters (Wilson iPhone iBooster, BlackBerry Curve C-Booster, and Universal U-Booster).

Replacement building antenna mount kit. For Wilson Building cellular antennas. Mount kit includes L Bracket, U-Bolt and 4 wood screws. This kit is included with Wilson Building Antenna. Works with Wilson Building Antennas 301202 and 301201. Antenna not...

Wilson Corner Wall Mount for weBoost & Wilson Panel Antennas. For mounting Wilson Panel Antennas in a corner. 901135 (Antenna Not Included) Installation Instructions

Wilson Electronics cup holder cradle mount. Works with Wilson Phone Cradle, Wilson SignalBoost Professional Amplifier and Wilson Cradle Boosters (Wilson iPhone iBooster, BlackBerry Curve C-Booster, and Universal U-Booster.

Wilson Dome Antenna mount. Mounts your antenna between ceiling joist for an in ceiling mount. Wilson Dome Antenna In-Ceiling Mount Kit Mount your Dome antenna above the ceiling wall between ceiling joist with this In-Ceiling mount. Includes mounting...

Wilson Gooseneck Windshield Cradle Mount Works with Wilson Phone Cradle, Wilson SignalBoost Professional Amplifier and Wilson Cradle Boosters (Wilson iPhone iBooster, BlackBerry Curve C-Booster, and Universal U-Booster. Wilson Gooseneck Windshield...

Flat surface mount for Wilson (weBoost) Marine Antennas 301130 & Marine Antenna 311130. Adjustable. Adjustable. For use with the Marine Antenna to mount on various surfaces. Standard 1 inch x 14 threaded Mount

Wilson Electronics 3/4 inch hole, standard NMO mount with 14' cable with SMA Male connector. For antenna whips with NMO type mount. Antenna not included. 901150 (formerly 901102 FME version) Wilson Electronics antenna 3/4 in hole, NMO base with cable...

Wilson Electronics 3/8 inch hole, standard NMO mount with 14' cable with SMA Male connector. For antenna whips with NMO type mount. Antenna not included. 905814 (Formerly 901103 FME) Wilson Electronics antenna hole mount base with cable. This cable...

Mount your Wilson Panel antenna inside a wall. Front panel is removable after installation. Wilson Panel Antenna In-Wall Mounting Kit Mount your Panel antenna inside a wall. Front panel is removable after installation. Features paintable cover. Mount,...

Glass Mount Antenna Remount Kit. For Wilson Glass Mount Antenna (301102) or Mini Glass Mount Antenna (301114). The package comes with: Alcohol pad, 3M VHB Adhesive strips for inside and outside.

Wilson Trucker Antenna 3 Way Mount. 3/8-24 male thread mount. 5 millimeter chrome-plated aluminum. Fits round poles up to 1 inch in size. Compatible with Wilson Cellular Trucker Antennas (301101) and (301133) 3/8-24 thread 5 millimeter chrome-plated...

Wilson Horizontal Trucker Antenna mount. 3/8-24 thread, 5 millimeter chrome-plated aluminum. Hardware included. Compatible with Wilson Cellular Trucker Antennas 301101 and 301133.

Vehicle Vent Mount for Wilson Cradle signal boosters. 901136 Wilson in-vehicle vent mount for mounting Wilson cradle signal boosters. Works with Wilson iPhone Cradle Booster, Wilson U-Booster, Wilson C-Booster, Wilson Sleek, Wilson Cradle Plus holder,...

Wilson DataPro mounting plate. The Wilson Electronics 901138 mounting plate is used to mount the Wilson DataPro cellular amplifier to a vending machine wall.

Convenient Antenna Mount with suction cups for window mounting. Works with Wilson Magnet Mount Antennas. (Antenna Not Included) This antenna mount uses 2 suction cups to attach to window glass or other smooth surface. Dim: 3 in. Tall x 1.25 in. Wide...