WilsonPro IoT 3G Booster Kit 12in Antenna [AC Power] 460109

WilsonPro Pro Signal 3G DirectConnect Signal Booster with 12" external antenna and AC Wall Outlet Power Supply. For cellular USB Modems, Hotspots, Cellular Routers. Great for Vending Machines, ATMs, Home / Office, etc. Part #460109 (formerly Wilson 470109, 811225)

The Pro Signal 3G cellular amplifier was developed specifically for Machine-To-Machine (M2M) applications. The Pro Signal 3G is based on the same field-tested, market-proven technology that powers Wilson’s cellular signal boosters for the consumer market. The Pro Signal 3G is ready to integrate with cellular modems to provide reliable signal that ensures successful data transfer. This booster kit works with all US wireless service provider networks using 3G Internet in 800Mhz & 1900MHz frequencies.

Connecting To Your Cellular Device

The Pro Signal 3G comes with a 3 foot RG-174 cable with SMA Male connectors on each end. It will connect directly to devices with SMA Female connectors. We also have a variety of external antenna adapters to connect to other external antenna port type. Hotspot & Router Antenna Adapters, USB Modem Adapters, Cable Connector Adapters & Converters.

Benefits

• Strong, reliable signal even in remote locations or other weak signal areas
• Less re sending of data due to poor connection means faster, more reliable data transfers

This cellular signal amplifier was developed specifically for Machine to Machine (M2M) installations. This cellular amplifier direct connect configuration is based on the same field tested, market-proven technology that powers Wilson’s Sleek in-vehicle cell phone signal booster for the consumer market.

The Pro Signal 3G’s small size makes it an ideal for vending machines, remote monitoring stations, vehicles or other installations with little room. The Pro Signal 3G can be paired with a variety of expertly designed Wilson Electronics cellular antennas for maximum system gain to overcome a weak signal. The Signal 3G is FCC certified to the latest technical standards for cell signal boosters.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Comes with:

• Pro Signal 3G Amplifier
• 12" Magnetic Mount External Antenna with 10ft Cable & SMA Connector
• AC Power Supply 859969
• 3ft RG-174 Cable with SMA Male connectors on each end

* Requires Direct Connection To Your Device. Adapter to connect to your device may be required and may not be included.

Features:

• Bi-directional signal booster amplifies signal to and from cell site
• FCC Certified
• Configurable to fit virtually any M2M installation

Integrators and OEMs can pair the Signal 3G with a variety of expertly designed for maximum system gain to overcome a weak signal. It also incorporates power control logic that ensures maximum output power is within cellular network standards and will not interfere with a cellular network.

 Installation Guide

 Pro Signal 3G Specification Sheet

Specifications

• Connectors: SMA Female
• Impedance: (input/output): 50 ohms
• Dimensions: 3.3 x 1.9 x .8 inch (8.4 x 4.8 x 2.0 cm)
• Frequency: 824-894 MHz / 1850-1990 MHz
• Max Gain: 15 dB
• Power output (uplink)
     28.9 dBm 800 MHz  CDMA
     31.8 dBm 1900 MHz CDMA
• Power Requirements: 5V DC, 1A

Includes 3ft RG-174 cable with SMA Male connectors for connecting to data device.