weBoost
weBoost Drive 4G-X Mobile Cellular 4G Signal Booster for Cars and Trucks
- SKU:
- AP470510
- UPC:
- 811815024866
- MPN:
- 470510
- Condition:
- New
- Availability:
- No Longer Available
- DISCONTINUED - SUBSTITUTE:
- weBoost Drive Reach
Description
* The weBoost Drive 4G-X has been replaced by the weBoost Drive Reach Signal Booster
----------------------
The weBoost Drive 4G-X is the most advanced, most powerful vehicle signal booster ever made available to US consumers. Featuring maximum FCC-allowed gain plus maximum allowed uplink/downlink power output, the Drive 4G-X set a new standard in connection range and performance. With more than three times the uplink power of similar boosters, the Drive 4G-X (X for Xtended Range) provides cellular connectivity for everyone in the vehicle. It does this at a range up to 60% further from the tower than any other vehicle booster available. Boosts voice and data on all U.S. cellular networks including 4G LTE, while maintaining backward compatibility with 3G and 2G legacy networks.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Service Providers Covered
The weboost Deive 4G-X covers all carriers in the United States using 800MHz and 1900MHz for phone calls as well as 3G Internet. It also covers most 4G frequencies.
- All US Carriers - 800MHz, 1900MHz, 3G Internet
- AT&T 4G 700MHz LTE
- Verizon 4G 700MHz LTE
- T-Mobile 4G 700MHz LTE & 1700/2100MHz
- Sprint 1900MHz G
The weBoost Drive 4G-X gets you a better signal from further away.
Many things prevent you from getting the best cellular signal as you travel. Obstructions like hills, trees and distance from the signal source all affect call quality, 3G & 4G Internet speeds and GPS systems. The 4G-X can give you a cellular connection even in places you couldn't connect before. It offers stronger mobile connections by operating with the maximum output power allowed under current FCC regulations, extending your service range up to 60 percent farther than other boosters on the market. It substantially improves your cellular signal strength on all cellular-connected devices in your vehicle—including smartphones, hotspots, MiFi Devices, Mobile USB Modems, tablets and laptops
This System Comes With
- Drive 4G-X Mobile Cellular Signal Amplifier (460021)
- Inside Slim Low Profile Antenna - 10ft Cable
- Outside Mini Magnetic Mount Antenna - 4 inches, 10ft Cable
- Power Supply (Vehicle Cigarette Lighter / Power Port)
- User Guide & Installation Manual
Benefits
- Extends cellular signal range
- Get a signal from further away from your service provider's towers
- Reliable cell signal and more consistent data speeds
- Faster data downloads
- Up to 2 hours additional talk time in weak-signal areas
Features
- Installs in minutes
- Optional indoor accessory kit available
- Boosts signal for all U.S. & Canadian cell carriers
- Friendly, U.S.-based customer support
- All components needed for installation in one package
- Simple instructions and DIY installation
- FCC Certified
Installation
If you're handy with standard hand tools, installation is easy. It involves mounting the outside antenna and running cable to the amplifier (usually mounted under the driver seat), then run a cable from the amplifier to the inside antenna. The booster comes with a power supply that plugs into your vehicle's cigarette lighter. Here is more information on Mobile Booster Installation Instructions with a Video.
weBoost Drive 4G-X Mobile Cell Phone Signal Booster System Specifications
Model Number | 470510 | ||||
Amplifier Model Number | 470010, 460021 | ||||
Connectors | SMA Female | ||||
Antenna Impedance | 50 Ohms | ||||
Frequency | 698-716 MHz, 729-756 MHz, 777-787 MHz, 824-894 MHz, 1850-1990 MHz, 1710-1755/2110-2155 MHz |
||||
Passband Gain (nominal) |
700 MHz 45.8 dB |
700 MHz 46.8 dB |
800 MHz 46.8 dB |
1700/2100 MHz 45.2 dB |
1900 MHz 44.6 dB |
|
|||||
20 dB Bandwidth (MHZ) Typical |
700 MHz 30.6 |
700 MHz 31.0 |
800 MHz 37.9 |
1700/2100 MHz 79.2 |
1900 MHz 77.3 |
Maximum Power |
|||||
Power output for single cell phone (Uplink) dBm |
700 MHz 24.84 |
700 MHz 24.35 |
800 MHz 23.4 |
1700/2100 MHz 21.3 |
1900 MHz 24.43 |
Power output for a single cell phone (Downlink) dBm |
700 MHz 2.87 |
700 MHz 2.79 |
800 MHz 2.8 |
1700/2100 MHz 2.0 |
1900 MHz 1.92 |
Power output for multiple received # Phones |
700 MHz Band 12/17 |
700 MHz Band 13 |
800 MHz Band 5 |
1700/2100 MHz Band 4 |
1900 MHz Band 2 |
2 | 25.4 | 23.9 | 22.9 | 22.8 | 24.9 |
3 | 21.8 | 20.4 | 19.4 | 19.3 | 21.3 |
4 | 19.3 | 17.9 | 16.9 | 16.8 | 18.8 |
5 | 17.4 | 16.0 | 15.0 | 14.8 | 16.9 |
6 | 15.8 | 14.4 | 13.4 | 13.2 | 15.3 |
Power output for multiple received # of Phones |
700 MHz Band 12/17 |
700 MHz Band 13 |
800 MHz Band 5 |
1700/2100 MHz Band 4 |
1900 MHz Band 2 |
2 | 4.8 | 5.6 | 5.4 | 6.3 | 4.5 |
3 | 1.3 | 2.1 | 1.9 | 2.8 | -0.9 |
4 | -1.2 | -0.4 | -0.6 | -0.3 | -1.6 |
5 | -3.2 | -2.4 | -2.6 | -1.6 | -3.5 |
6 | -4.7 | -4.0 | -4.2 | -3.2 | -5.1 |
Noise Figure | 5 dB nominal | ||||
Isolation | > 90 dB | ||||
Power Requirements | 6V 2A |
Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1 minute. After 5 (five) such automatic restarts, any problematic bands are permanently shut off until the Signal Booster has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity are maintained by the Signal Booster’s microprocessor.
The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator
No Shipments or Use Outside the U.S.
Unfortunately All weBoost and WilsonPro Signal Booster Systems can only be shipped and used within the United States. weBoost or WilsonPro products certified by the U.S. Federal Communications Commission (FCC) are no longer recognized by Industry Canada (IC) to be certified for use in Canada and cannot be used or shipped to Canada. There are specific version of Canadian Approved (IC) than can be used. Please contact a weBoost or WilsonPro dealer in your country for these systems.
THIS IS A CONSUMER DEVICE.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the utilization of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING.
E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards