AT&T Unite Explore AC815S Antenna Adapter SMA Female
- In Stock - Usually Ships In 24 Hours
Antenna adapter for AT&T Unite Explore AC815S. Requires cellular antenna with SMA Male connector (not included). Allows you to connect an external antenna or signal booster for better cellular reception. Also connects to other devices with TS-9 RF ports.
This adapter has a TS-9 type connector to connect to the AC815 and an SMA Female connector to connect to an antenna with an SMA Male connector.
Requires external antenna not included.
Length: Approx. 19 inches.
WARNING - To purchase this product, you must read this notice and agree to buy and use this product at your risk. Although it's rare, using this external antenna adapter can damage your device and void the device's warranty. When an external antenna adapter is inserted into the port on your mobile device, your device's antenna is sometimes disconnected so that your device can receive the signal through an external antenna. When you remove the adapter, your device's antenna should reconnect. If it does not, your device will show a weak or no signal and no service. This lack of signal means that the switch that connects and reconnects the adapter is damaged or stuck. Despite the adapter manufacturer's testing, some devices may have weak ports and be damaged using this product. Damage may also be caused by pushing adapters in too far, twisting the connector when inserting or removing and by pulling on the adapter cable. As an alternative, we recommend a powered signal booster that does not require a connection to your devices RF port. These signal boosters will perform better than just an antenna directly connected to your device without the risk of plugging in an antenna adapter.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov