Wilson 700-800MHz Yagi Building Cellular Directional Antenna

Wilson 700-800MHz Yagi Cellular Antennas are very effective at increasing your cell phone's signal strength in rural areas. The Yagi is a directional antenna and should be mounted above tree lines and pointed directly to your service provider's nearest cell tower.

Wilson Yagi Cellular Antenna

Wilson Yagi Cellular Antennas are very effective at increasing your cell phone's signal strength in rural areas. The Yagi is a directional antenna and should be mounted above tree lines and pointed directly to your service providers nearest cell tower. Wilson’s Yagi Antenna will collect the cell tower signal and send it through the cable to an amplifier or directly to the cell phone or cellular data card. When the cell phone or cellular data card transmits, the signal is transferred to an amplifier or directly to the antenna and broadcast back to the cell tower.

Features:

• High Gain
• Directional Antenna
• Pipe Mounting Hardware Included
• Easy To Install
• 90 Day Wilson Warranty

Wilson Yagi Antenna Boom

The Boom is the main part of the antenna and is constructed of aluminum. The length is 32.5 inches. There are 8 elements on the boom. The aluminum elements are insulated from the boom and held in place with corrosion resistant clamps. Output Feed The output feed coaxial connector is an N type female. A Gamma match feed system is used for low loss and wide bandwidth. The antenna impedance is 50 ohms.

Best used with Wilson 400 Ultra Low-Loss or equivalent cable with N connector.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Pipe Mount

Pipe mount hardware is included with the purchase of a Wilson Yagi Antenna. The teeth of the pipe mount insure a secure hold. The pipe mount is adjustable to accommodate pipe diameters from .5 inch to 1.5 inch.

Comes With:

• Yagi Antenna
• 2 - U-Bolts
• 2 - Pipe Brackets
• 4 - 1/4" Split Lock Washers
• 4 - 1/4"-20 nuts
• 4" Cable with N Female Connector

Installation Guide

Warning: Lightning protection is recommended for all installations (Wilson Part #859902). Take extreme care to ensure that neither you nor the antenna comes near any electric power lines.

Wilson Yagi Antenna Specifications

• Frequency: 700-800 MHz - Gain: 10.0 dB
• Frequency: 824-894 MHz - 10.8 dB (13.0 dBi)
• Frequency: 880-960 MHz - 8.8d dB
• Impedance............. 50 Ohms
• Max. Power............50 Watts
• Radiation............... Directional
• Polarization........... Vertical or Horizontal
• Wavelength........... 2 Wavelengths 806-894 MHz
• Ground Plane........ Built in Ground Plane

Mechanical Properties:

• Elements............... 8
• Connecter.............. N-Female
• Material................. Aluminum
• Length.................. 32.5"
• Height................... 7.5"
• Mounting.............. Mounts on Pipe w/ .5" to 1.5" Diameter