weBoost Drive X Mobile Signal Booster for Cars & Trucks 475021

(No reviews yet) Write a Review
In Stock - Usually Ships In 2-3 Days
Short Description:
Cost effective and powerful mobile cell phone signal booster system for those in need of a reliable cell signal booster for multiple devices and users when on the road. For Cars, Trucks & RVs.
  • weBoost Drive X Mobile Signal Booster System
  • weBoost Drive X - Group
  • weBoost Drive X - Kit Contents
  • weBoost Drive X - Diagram
  • weBoost Drive X - Package
  • weBoost Drive X - Inside Antenna
  • weBoost Drive X - Power Supply
  • weBoost Drive X - Amplifier
  • weBoost Drive X - Outside Antenna
NOW ONLY: $429.99


weboost banner over 2 million signal boosters sold

weBoost Drive X— Standard, Multi-User In-Vehicle Cell Signal Booster.

For those in need of a more reliable cell signal coverage for multiple devices and users when on the road—but also want the most cost-effective solution.

Drive X, weBoost's multi-user cell signal booster, offers driver and passengers an affordable way to enjoy more reliable coverage. It provides a cost-effective solution for improving cellular connectivity for multiple devices, simultaneously.

Key Features

  • As weBoost's most affordable multi-user, In-vehicle cell signal booster, the Drive X offers a cost-effective way to improve cellular connectivity when on the road.
  • The Drive X provides better coverage and can reach far away cell towers at distances up to 33% farther than our Drive Sleek single-user vehicle booster.
  • The Drive X can be easily installed inside any passenger car, truck, van or SUV in just minutes; without the need for tools or extra accessories.
  • Drive X comes with the Mini-Magnet outside antenna; allowing for secure placement on vehicle roofs. Adhesive disk included for aluminum rooftops.

Ideal for passenger cars, trucks, vans, and SUVs, Drive X can enhance cell signal on all available network speeds from far away towers—at distances up to 33% farther than Drive Sleek. With its Mini-Magnet outside antenna, the Drive X installs in just minutes (without tools). Immediately, it works to stop dropped calls, improve voice quality, increase streaming quality, and more.

The Drive X is compatible with all cell phones, hotspots, tablets, and other cellular-connected devices and works on all US carrier networks—including Verizon, Sprint, AT&T, and T-Mobile.

Drive X comes equipped with the Mini Magnet-Mount antenna and can be installed in minutes—without tools.

*Adhesive disk is included for vehicles with aluminum rooftops.

prop 65 symbolWARNING: Cancer and Reproductive Harm -

Service Providers Covered

Image Of Cellular Carrier Logos

The weboost Drive 4G-X covers all carriers in the United States using 800MHz and 1900MHz for phone calls as well as 3G Internet. It also covers most 4G frequencies.

  • All US Carriers - 800MHz, 1900MHz, 3G Internet
  • AT&T 4G 700MHz LTE
  • Verizon 4G 700MHz LTE
  • T-Mobile 4G 700MHz LTE & 1700/2100MHz
  • Sprint 1900MHz G 

 This System Comes With

  • Drive X Amplifier
  • Inside Slim Low Profile Antenna - 10ft Cable
  • Outside Mini Magnetic Mount Antenna - 4 inches, 10ft Cable
  • Power Supply (Vehicle Cigarette Lighter / Power Port)
  • Mounting Bracket
  • User Guide & Installation Manual


  • Extends cellular signal range
  • Get a signal from further away from your service provider's towers
  • Reliable cell signal and more consistent data speeds
  • Faster data downloads
  • Up to 2 hours additional talk time in weak-signal areas

weBoost Drive X System Specifications

Product Number U471010
Model Number 460021
FCC ID PWO460021
Connectors SMA Female 
Antenna Impedance 50 Ohms    
Frequency 699-716 MHz, 729-756 MHz, 777-786 MHz, 824-894 MHz, 
1850-1995 MHz, 1710-1755/2110-2155 MHz    



Maximum Power     

Power output for single cell phone 
(Uplink) dBm 

700 MHz
Band 12/17


700 MHz
Band 13


800 MHz
Band 5


1700/2100 MHz
Band 4


 1900 MHz
Band 2


Power output for a single cell phone 
(Downlink) dBm 

700 MHz
Band 12/17


700 MHz
Band 13


800 MHz
Band 5


1700/2100 MHz
Band 4


1900 MHz
Band 2


Power output for multiple received 
channels (Uplink) dBm

# Phones 

700 MHz
Band 12/17
700 MHz
Band 13
800 MHz
Band 5 
1700/2100 MHz
Band 4
1900 MHz
Band 2
2 25.4 23.9 22.9 22.8 24.9
3 21.8 20.4 19.4  19.3 21.3
4 19.3 17.9 16.9 16.8 18.8
5 17.4 16.0 15.0 14.8 16.9
6 15.8 14.4 13.4 13.2 15.3

Power output for multiple received 
channels (Downlink) dBm

# of Phones 

700 MHz
Band 12/17
700 MHz
Band 13
800 MHz
Band 5 
1700/2100 MHz
Band 4
1900 MHz
Band 2
2 4.8 5.6 5.4 6.3 4.5
3 1.3 2.1 1.9 2.8 -0.9
4 -1.2 -0.4 -0.6 -0.3 -1.6
5 -3.2 -2.4 -2.6 -1.6 -3.5
6 -4.7 -4.0 -4.2 -3.2 -5.1
 Noise Figure  5 dB nominal    
 Isolation  > 90 dB    
 Power Requirements  6V 2A

Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1 minute. After 5 (five) such automatic restarts, any problematic bands are permanently shut off until the Signal Booster has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity are maintained by the Signal Booster’s microprocessor.

The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator.

No Shipments or Use Outside the U.S.

Unfortunately All weBoost and WilsonPro Signal Booster Systems can only be shipped and used within the United States. weBoost or WilsonPro products certified by the U.S. Federal Communications Commission (FCC) are no longer recognized by Industry Canada (IC) to be certified for use in Canada and cannot be used or shipped to Canada. There are specific version of Canadian Approved (IC) than can be used. Please contact a weBoost or WilsonPro dealer in your country for these systems.



BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.


E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards

View AllClose