ZTE MF332 External Antenna Adapter FME F
- In Stock - Usually Ships In 24 Hours
Telstra Turbo Card ZTE MF332 External Antenna Adapter. Connect external antenna to a ZTE MF332 data card.
ZTE Telstra MF332 data card external antenna adapter. Connect external antenna to a ZTE MF332 data card.
20" RG-174 cable with FME Male on one end and ZTE Telstra MF332 connector on the other.
Works with Telstra Turbo Card MF332 GPRS/EDGE/UMTS/HSDPA 3.6Mbps PCMCIA Data Card, ZTE Telstra MF332 PCMCIA II
WARNING - To purchase this product, you must read this warning and agree to purchase and use this product at your own risk. Although it's rare, using this external antenna adapter can damage your device and void it's warranty. When an external antenna adapter is inserted into the port on your mobile device, your device's antenna is disconnected so that your device can receive signal through an external antenna. When you remove the adapter, your device's antenna should reconnect. If it does not, your device will show a weak or no signal and no service. This means that the switch that connects and reconnects the adapter is damaged or stuck. Despite the adapter manufacturer's testing, some devices may have weak ports and be damaged using this product. Damage may also be caused by pushing adapters in too far, twisting the connector when inserting or removing and by pulling on the adapter cable. As an alternative, we recommend a powered signal booster that does not require a connection through your devices RF port. These signal boosters will perform better than just an antenna directly connected to your device without the risk of plugging in an antenna adapter.