Wilson 311102 15in Glass Mount Antenna SMA Male *DISCONTINUED

(No reviews yet) Write a Review
No Longer Available
  • Wilson 311102 15in Glass Mount Antenna SMA Male *DISCONTINUED
  • Wilson 311102 15in Glass Mount Antenna SMA Male *DISCONTINUED

Out of Stock


Wilson 15 inch Glass Mount Cell Antenna is mounted using 3M adhesive. The whip with antenna base is mounted outside the vehicle and the mount with cable attached is mounted directly opposite on the inside of the vehicle glass. Comes with SMA Male connector.

Wilson Glass Mount Antenna

The Wilson Electronics Cellular Glass Mount Antenna Outperforms the Competition Up to 90% of a cellphone's power on transmit and receive is absorbed within a vehicle and the users head. Wilson solves this problem by channeling all the power from the cell phone to the outside antenna. This results in our glass mount antenna transmitting and receiving over 10 times the signal of a cellular phone used inside a car / truck without an outside antenna.

The Wilson Glass Mount Cellular Antenna was carefully designed to minimize loss and maximize gain on multiple cellular bands. Wilson accomplished this by using a phasing coil and a low loss coaxial phase reversing device that provides high gain on both frequencies. Wilson's innovative design results in high efficiency with low losses and will get the most signal to your cellular phone. Thanks to these innovations and our attention to detail Wilson Electronics has the best performing glass mount cellular antenna available.

The Wilson Dual Band Glass Mount Antenna is about 15 tall and includes 14 feet of RG-58 low loss coax cable with SMA Male connector. Connects to signal boosters that have SMA Female connectors.

Warning: Not Recommended Use With Repeater Type Signal Booster Systems

We do not recommend using this antenna with a repeater type cellular signal booster system such as the Wilson Wireless Boosters, weBoost Drive boosters, Surecall Fusion or Flex. These types of systems require separation between the inside and outside antennas to prevent signal oscillation. The metal of a vehicle helps block the signal between the 2 antennas and aids in this separation. Mounting a glass mount antenna will require more separation between the 2 antennas which may not be possible in an average car or truck. A better antenna option is a magnetic mount or hole mount antenna for these systems.

prop 65 symbolWARNING: Cancer and Reproductive Harm -

Passivated Glass Warning

Do not use on auto glass that has metal content (passivated glass or tenting) or double pane windows. This type of glass will block the signal between the inside base and outside antenna whip.

Comes with a 90 day warranty.



  • Frequency: 700-800 MHz - Gain: 1.8 dBi
  • Frequency: 824-894 MHz - Gain: 3.5 dBi
  • Frequency: 880-960 MHz - Gain: 2.8 dBi
  • Frequency: 1710-1880 MHz - Gain: -1.5 dBi
  • Frequency: 1850-1990 MHz - Gain: 4.8 dBi
  • Frequency: 2110-2170 MHz - Gain: 1.0 dBi
  • Impedance: 50 ohms
  • Radiation: Omni
  • Polarization: Vertical
  • Ground Plane: Built-In Ground Plane
  • Connector: SMA Male
  • Material: Whip - Stainless Steel
  • Coax Cable: RG58 - 14 feet / 4.27 meters
  • Height: 15 inches / 38.10 cm
  • Mount: Glass Mounting with 3M™ Adhesive
View AllClose