Home Cellular & 4G Signal Booster System For Cell Phones & Hot Spots

(No reviews yet) Write a Review
SKU:
AP470103PPC
UPC:
811815024521
Condition:
New
Availability:
In Stock - Normally Ships Within 24 Hours
Short Description:
Ideal 4G Signal Booster for Home & Small Buildings Like Mobile Homes, Office Trailers, Etc.
  • weBoost Connect 4G Building Cellular Signal Booster
  • weBoost 470103 Connect 4G Install Diagram
  • How It Works - weBoost Connect 4G
  • Connect 4G Kit Includes
  • Home Cellular & 4G Signal Booster System For Cell Phones & Hot Spots
  • Home Cellular & 4G Signal Booster System For Cell Phones & Hot Spots
  • Directional Antenna
  • Panel Antenna
  • Home Cellular & 4G Signal Booster System For Cell Phones & Hot Spots
$549.99

Description

weBoost Connect 4G Cell Phone Signal Booster - For Houses, Mobile Homes, Small Buildings

The weBoost Connect 4G is the ideal system for small houses, small offices, mobile homes, portable buildings, etc. It is a simple, practical solution to maintaining continuous communication with cellular devices including, cellular Hot Spots, cell phones, iPhone, BlackBerry, smartphones, tablets, MiFi devices, cellular data USB cards, cellular routers, etc.

Features:

  • Ideal for Small Homes, Mobile Homes, Work Trailers, Portable Buildings
  • Boost Signal For Cell Phones, Hot Spots, Cellular Routers, iPhone's
  • Works For AT&T, Verizon, T-Mobile, Sprint & Others
  • Boosts Signal For Multiple Devices

Image Of Cellular Carrier Logos

prop 65 symbolWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Service Providers Covered

The weBoost Connect 4G Home Cell Phone Booster covers all carriers in the United States using 800 MHz and 1900 MHz for phone calls as well as 3G Internet. It also covers most 4G frequencies.

  • All Carriers In The US Using - 800 MHz, 1900 MHz, 3G Internet
  • AT&T 4G 700 MHz LTE
  • Verizon 4G 700 MHz LTE
  • T-Mobile 4G 1700/2100 MHz
  • Sprint 1900 MHz G

For T-Mobile 4G 700 MHz, consider the weBoost Connect 4G-X system.

Note: Does not improve WiMax 2500 MHz frequency or iDen Networks.

Coverage Area

How Much Indoor Area Signal Improvement Will This Signal Booster Provide?

With a very good signal outdoors (at the outdoor antenna location), this signal booster will cover up to 5,000 sq ft indoors. The amount of indoor coverage area is dependent on the outside signal strength. The stronger the outdoor signal, the more indoor area coverage. Like all signal booster systems, this system requires the outdoor antenna to be placed in an area where there is a good consistent signal in order to get the most improved signal coverage area indoors.

Estimated Coverage Area For This System Configuration

Signal Strength Estimated Indoor Coverage Area
 -100 db (1-2 Bars)  1,000 sq ft
 -90 db (3-4 Bars)  3,500 sq ft
 -80 db (5 Bars)  5,000 sq ft

How To Get The Best Coverage

The key to getting the best indoor signal coverage, is getting the outdoor antenna to where the signal is best. The stronger the outdoor signal, the larger the coverage area indoors. If your signal is 2 bars or less and fluctuates downward a lot, you will not get much coverage on the inside. In this case your phone will need to be very close to the indoor antenna to see signal improvement.

For Larger Homes & Commercial Buildings - consider the WilsonPro Signal Booster Systems.

We can help you select the best system for your building. Feel free to Contact Us  with your requirements.

Also See: Estimating Coverage Area

Kit Includes:

  • weBoost Connect 4G Amplifier
  • Outdoor Wide-Band Directional Antenna With U-Bolt Pole Mounting Bracket
  • Indoor Panel Antenna With Wall Mount Bracket
  • 1 - 30 ft RG-6 Quad Shield Cable
  • 2 - 15 ft RG-6 Quad Shield Cable
  • 1 - 8 in Flat Window Entry Cable - Thin cable for routing through slim openings like windows and doors.
  • AC Wall Power Supply
  • Installation Guide

Helpful Documents

 More Information & Specs

 Installation Guide

 Quick Install Guide 

Not For Shipment or Use Outside the U.S.

Unfortunately All weBoost and WilsonPro Signal Booster Systems can only be shipped and used within the United States. weBoost or WilsonPro products certified by the U.S. Federal Communications Commission (FCC) are no longer recognized by Industry Canada (IC) to be certified for use in Canada and cannot be used or shipped to Canada. There are specific version of Canadian Approved (IC) than can be used. Please contact a weBoost or WilsonPro dealer in your country for these systems.

 

THIS IS A CONSUMER DEVICE.

BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.

WARNING.

E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards

View AllClose