Wilson Electronics

Bulk Wilson RG-11 Coax Cable in a 500 Foot Roll. 951155 Wilson Electronics RG-11 75 ohm cable for lower attenuation (less signal loss) when compared to RG-6. Great for longer cable runs. Use with 75...

Wilson RG-11 Coax Cable in a 75 Foot roll with F Male Connectors on each end. 951175 Wilson Electronics RG-11 75 ohm cable for lower attenuation (less signal loss) when compared to RG-6. Great for...

This N Type Male crimp-on connector fits RG-58 coax cable. Crimp tool required. Common Use: Connect Antenna Cable to Device or Cable with N Male connector. We offer a variety of coax cable adapters...

Antenna cable adapter with SMA Female on one end and SMB on the other.  Used to connect antennas with SMA Male connector to devices with SMB Connectors such as the weBoost Drive Sleek (SMB)...

SMA Male to SMB Adapter.  Used to connect the weBoost 4G-OTR Antenna (SMA Female) (304415) to the weBoost Drive Reach or weBoost Drive Sleek (SMB) booster. Connector Types SMA...

Wilson OTR Truck Antenna Adapter For weBoost Drive Reach or Drive Sleek. This adapter enables you to connect the weBoost 4G-OTR Antenna (with SMA Female Connector) (304415) to...

This metal screw on adapter has an SMA Female connector on one end and an FME Female Nipple on the other end. This is a shorter version and is about 5/8 inches long. You can find the longer version...

WilsonPro Prep /Strip Tool For 1/2" Plenum Cable  Designed for use with the WilsonPro ½-inch Plenum Cable and WilsonPro N-Male 1/2" Plenum Connectors. For Wilson 1/2 Plenum...

WilsonPro Flare Tool - For 1/2" Plenum Cable Connectors  The WilsonPro Flare Tool is designed for use with the WilsonPro ½-inch Plenum Cable and WilsonPro N-Male 1/2" Plenum Connectors...

WilsonPro ½-inch N Type Male Connector Designed for use with the WilsonPro ½-inch Plenum Cable, these N-Male Connectors are best for field termination of the cable N Male For Wilson...

Replacement **Black Side Exit Cable Adapter Cable Routing Feed Thru Adapter for Wilson OTR Truck Antennas SKUs OTR Truck Antenna 311229, 304415, 311224, RV Antenna 311230.  - OTR Antenna...

Replacement Side Exit Cable Adapter Cable Routing Feed Thru Adapter for Wilson OTR Truck Antennas SKUs OTR Truck Antenna 311229, 304415, 311224, RV Antenna 311230.  - OTR Antenna Not...

Replacement Spring Base For weBoost / Wilson OTR Truck Antennas and RV Antennas. Spring base only. - Replaces 901115 Fits Wilson 304415 OTR Antenna Wilson 311229 OTR Antenna Wilson 311224...

Wilson Electronics 3/4-inch hole, Standard, Low Frequency NMO mount with 14' cable with SMB connector (Connector on weBoost Drive Reach, Drive Reach Fleet and weBoost Drive Sleek Amplifiers)...

Wilson Overland Antenna Mount - For Wilson OTR Antennas The Wilson Drive Reach Overland OTR Antenna Mount is a more versatile mounting bracket creating an adjustable outside antenna. The versatile...

Wilson OTR Antenna Replacement Mast Wilson 13-Inch Replacement Mast for Drive OTR, Drive RV, Drive Overland Antennas. Comes with  13 Inch Threaded Mast Thread Lock Adhesive Fluid

Wilson OTR Antenna Replacement Mast Wilson 18-Inch Replacement Mast for Drive OTR, Drive RV, Drive Overland Antennas. Comes with  18 Inch Threaded Mast Thread Lock Adhesive Fluid

Wilson Electronics 3/8 inch hole, standard NMO mount with 14' cable with SMA Male connector. For antenna whips with NMO type mount. Antenna not included. 905814 (Formerly 901103 FME) Wilson...

Pole Mount For Wilson Electronics & weBoost Panel Antennas. Panel Antenna Not Included. 901142 Mount your Panel Antenna to a Metal or PVC Pipe. Comes With L-Bracket - Aluminium U-Bolt,...

Use your Wilson cradle signal booster on your desktop with this Wilson adjustable desk top cradle mount. This adjustable desktop holder mount works with Wilson Phone Cradles, Wilson SignalBoost...

Wilson Corner Wall Mount for weBoost & Wilson Panel Antennas. For mounting Wilson Panel Antennas in a corner. 901135 (Antenna Not Included) Installation Instructions

Wilson Dome Antenna mount. Mounts your antenna between ceiling joist for an in ceiling mount. Wilson Dome Antenna In-Ceiling Mount Kit Mount your Dome antenna above the ceiling wall between ceiling...

Flat surface mount for Wilson (weBoost) Marine Antennas 301130 & Marine Antenna 311130. Adjustable. Adjustable. For use with the Marine Antenna to mount on various surfaces. Standard 1 inch x 14...

Wilson Electronics 3/4-inch hole, Standard Low Frequency NMO mount with 14' cable with SMA Male connector. For antenna whips with NMO type mount. Antenna not included. 901150 (formerly 901102 FME...

Wilson NMO Antenna Mount With SMA Male Connector - 900037 The Wilson Magnetic NMO Mount is designed to be used with the Wilson NMO Antenna (314405) as well as other NMO antennas. The strong, 3...

Wilson Trucker Antenna 3 Way Mount The Wilson 3-Way Mount is used to mount Wilson Over-The-Road OTR Truck Antennas to Mirrors, Poles, Headache Racks. I can also be used as an L-Bracket to mount a...

Wilson Horizontal Trucker Antenna mount. 3/8-24 thread, 5 millimeter chrome-plated aluminum. Hardware included. Compatible with Wilson Cellular Trucker Antennas 301101 and 301133.

Wilson DataPro mounting plate. The Wilson Electronics 901138 mounting plate is used to mount the Wilson DataPro cellular amplifier to a vending machine wall.

Wilson NMO Antenna Mount With SMA Male Connector - 900037 *** USED CONDITION - This is a Returned Item in very good condition. Limited Quantities Available. *** The Wilson Magnetic NMO Mount is...

  *** This item is no longer available. Substitute weBoost 850041 Power Supply   Power Supply For weBoost Drive Reach (12-Volt Versions) weBoost power supply for the 12-volt weBoost...

weBoost Metal Adhesive Disk for Mobile Antennas Mount Comes with Metal Disk and Adhesive Disk This antenna metal mounting plate was made specifically for vehicles with aluminum bodies. The disk is...

Wilson 10db Attenuator. Attenuates signal by 10db. Comes with N-Male coax connectors. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Wilson 851111 Power Supply For weBoost Drive X Boosters 12v Dc To 5V/3A DC Fused Hardwire Power Supply with 2.5mm DC Plug. Works With weBoost Drive X Amplifiers / Signal Boosters For permanent...

Wilson's Cradle Antenna 301146. Cable has SMA Male Connector and comes with an FME Female Adapter. For use with a powered cellular signal booster (not included) that has an FME Male connector for...

Wilson 4G Trucker Over-The-Road Cellular 4G Antenna The Wilson 4G OTR Antenna covers 2G, 3G and 4G frequencies for most service providers in North America. It is built for newer 4G Mobile Signal...

Wilson 6db attenuator 859936 attenuates signal by 6db. Comes with N-Male coax connectors. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

weBoost (Wilson Electronics) DC Hardwire Power Supply for weBoost Drive 3G-X mobile booster amplifiers. 12v / 3A. 859905 Also works with Older Wilson "DirectConnect" Boosters that connect...

  *** This power supply is no longer available. Substitute AM850011 AC/DC Power Supply AC/DC Power Supply for weBoost Drive 4G-X, Drive 4G-M, Connect 3G, Home 3G and other Wilson 6 volt...

Wilson 859922 Antenna Signal Splitter/Combiner - 50 Ohm, 600-900 MHz/1630-2300 MHz Bands. Usage Combine One 600-900 MHz Antenna with One 1630-2300 MHz Antenna OR Inside Combine...

Wilson 859955. Connect 50 ohm cable to 75 ohm cable. Commonly used when in applications when longer cable lengths are required for a 75 ohm amplifier system and requires a lower loss cable such as...