- Building Systems
- Mobile Systems
- HotSpot · Router · Modem
- Phone Accessories
• Commercial Building 4G Signal Booster System
• Includes 3 Indoor Panel Antennas & Splitter
• Boost Voice & 4G Internet
• For AT&T, Verizon, Sprint, T-Mobile and Others
• Covers Up To 30,000 sq ft. (With Strong Outdoor Signal)
• Easy Install - Complete Kit - Amp, Antennas, Cable
• WilsonPro 3 Year Warranty
• WilsonPro 70 PLUS Large Building 4G System With 3 Indoor Panel Antennas
• Covers up to 30,000 sq ft. (With Good Outside Signal)
• Ideal for Offices, Multi Story Buildings, Large Homes Buildings
• Boost Voice Plus 3G & 4G Internet Signals
• Works For AT&T, Verizon, T-Mobile, Sprint & Others
• Works With Multiple Devices
This system includes the WilsonPro 70 PLUS Cellular Repeater System plus other components to give you 3 Indoor Antennas. It includes additional Coax Cable, 3-Way Splitter and Lightning Surge Protector. Use this cellular system to spread the signal to 3 areas within a building. Use this 3 Indoor Antenna setup when the interior walls contain metal or rock and the signal from one antenna will not penetrate interior walls. They are also used to bridge an area within a building. This system comes with all the components you need for a building system covering two areas including one outside antenna, three indoor antennas, 5 cables and a 3-Way Splitter.
The WilsonPro 70 PLUS signal boosters offer even more advantages. It has the highest downlink power compared to its closes competitor. It can get a better signal from further away. It features a sel-optimizing microprocessor with a builtin-in graphical signal meter. The biggest advantage of the Wilson Pro 70 Plus is that it will provide full coverage when other amplifiers power down because of an outside signal that is too strong. The Pro 70 Plus continues at full power with a signal as strong as -58db. Most amplifiers power down with a signal of -65db or greater.
This allows for more signal in environments where the incoming signal is strong, up to +12dB more downlink power than the competition. The benefit is a stronger signal coming out of the booster, providing more coverage from a single booster.
This allows for a stronger signal radiating to the tower, up to +3dB more than the competition, providing greater user capacity and increased range from the cell site.
The WilsonPro 70 covers all carriers in North America using 800MHz and 1900MHz for phone calls as well as 3G Internet. It also covers most 4G frequencies.
The WilsonPro 70 Commercial Building Cellular Signal Booster provides a large building coverage area. The Pro 70 is perfect for large commercial buildings, office buildings and larger luxury homes. The WilsonPro 70 improves indoor cellular coverage up to 15,000 square feet (more with a very strong signal outdoors). It is a simple and efficient solution to maintain continuous communication. The system works for all cellular-enabled devices including, cell phones, iPhone, BlackBerry, smartphones, tablets, Hotspots, MiFi devices, cellular data USB cards, cellular routers, etc.
This system comes with an outdoor directional antenna. The advantage of the directional antenna is that it has a higher gain directed towards your cell service provider tower. It's especially useful for 4G frequencies and is the best solution for 4G Internet. We also include a pole mount for easy mounting of your antenna outdoors. More Wide Band Antenna Info
Installing a Lightning Surge Protector
More Info: Lightning Surge Protector #859902 50 OHM
Installation is easy and straightforward. You can install with minimal tools.
A step-by-step installation guide and video will walk you through the process. The antennas communicate with both cellular devices and your service provider's cell tower for the strongest, most powerful signal possible.
The WilsonPro 70 Plus amplifier boosts signals to improve coverage (including 4G Internet) no matter your cellular carrier in the United States and Canada. Boost 800MHz & 1900MHz frequencies. Most North American carriers use these frequencies for voice and 3G Data including AT&T Wireless, Verizon, Sprint, T-Mobile, and others. It also boosts 4G 700MHz LTE signal for AT&T and Verizon. It also boosts 1700/2100MHz frequency for T-Mobile 3G and 4G. The system comfortably handles multiple simultaneous connections across multiple carriers, providing effortless voice and data communications for all users.
With a strong signal outdoors, this signal booster will cover up to larger buildings including multi-story buildings. The amount of coverage area is dependent on the outside signal strength, where you mount the outdoor antenna. The stronger the outside signal, the more area coverage area.
Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1 minute. After 5 (five) such automatic restarts, any problematic bands are permanently shut off until the Signal Booster has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity are maintained by the Signal Booster’s microprocessor.
The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator
THIS IS A CONSUMER DEVICE.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
E911 location information may not be provided or may be inaccurate for calls served by using this device. Please note, the four largest carriers, namely, AT&T, T-Mobile, Verizon and Sprint, and more than 90 regional carriers have given a blanket consent to all boosters meeting the new certification standards