Wilson Trucker Antenna (301101) with FME Female connector - Includes 3-Way Mount (901104). Cable has FME Female Connector. Wilson's most popular cellular antenna. Comes with Wilson Trucker antenna and 3 Way Mount.
Wilson Trucker Antenna & 3-Way Mount
The Trucker Antenna from Wilson Electronics is a popular and effective cellular antenna when connected to a cellular device or powered signal booster system. It mounts on a standard 3/8-24 thread female mount and includes 12 feet of RG-58 low loss coax cable with SMA Male connector (also comes with screw on FME Female connector). The antenna's total height is 32 inches. The Wilson Cellular Trucker can be used on mobile applications such as trucks,buses and boats as well as fixed structures such as homes, office buildings, portable buildings, etc.
The antenna's innovative built in ground plane design allows it to be mounted on any surface - Metal, Fiberglass, Wood, etc. This means it will have excellent performance on the new fiberglass body trucks as well as the standard metal body trucks. The antenna is also designed with an elevated feed system so that the antenna can get as high as possible to maximize signal strength.
Wilson Cellular Trucker Antenna (301101)
Wilson 3-Way Mount (901104)
12ft RG-58 Cable with FME Female Adapter
Wilson Trucker Antenna Specifications:
Frequency Range: 806-894 MHz, 1850-1990 MHz
1.9:1 Average across 806-894 MHz
1.8:1 Average across 1850-1990 MHz
Impedance: 50 ohms / both bands
5.12 dbi (3 dbd) 806 - 894 MHz
6.12 dbi (3 dbd)1850 - 1990 MHz
9 wave length 806-894 MHz
1.95 wave length 1850-1990 MHz
Ground Plane: Independent Ground Plane (except NMO mounts which use the vehicle's metal as a ground plane)
Fiberglass - Spiral Wound
Coax Cable: RG-58 / 12'
Mount: Standard CB 3/8 X 24 thread. (NMO and RV mounted Truckers also available)