Product Description
Wilson AG SOHO 60 DualBand Bi-Directional Cellular Amplifier / Repeater
The Small Office / Home Office (SOHO) DualBand cellular amplifier repeater. The Wilson Electronics AG SOHO 60 can typically cover 1-2 rooms (depending on outside signal strength). The Wilson AG SOHO 60 signal booster greatly improves signal strength inside a building when using your cell phone. It does this without physical connection to your phone allowing you to walk around freely during a call. It even allows up to two cell phones and/or Data Cards to be used simultaneously. Works for most 800MHz and 1900MHz range networks including CDMA, TDMA, GSM within the US and Canada (NOTE: Will Not work for Sprint/Nextel iDen or Mike/Telus Networks.)
The Wilson AG SOHO 60 delivers gain that can be adjusted. The adjustable range is from 30db to 60db For 1900MHz frequencies and 25db to 55db for 800MHz frequencies. The gain can be adjusted in 5db increments. Adjustable gain amplifiers make installation easier with more flexibility. If there either frequency range is stronger than then other causing oscillation, you can adjust the gain without having to purchase a different amplifier.
Comes With
- Wilson Electronics AG SOHO 60 Amplifier
- AC Power Supply
- Instructions
- 2 - FME F / N F connectors (for use with optional Wilson 9913 and LMR 400 cable if needed).
Requires Inside Antenna, Outside Antenna and cable (Not Included)
Surge Protector
Optional Wilson Lightning Surge Protector AM859902 recommended (not included).
Also See:
About Building Cellular Amplifiers
The Wilson SOHO In Building cellular amplifier repeater is a small, bi-directional amp that delivers service levels consistent with what would be expected in areas of high cell network coverage. They amplify a weak or shadowed cellular signal and repeat it in an in-building small office / home office (SOHO) applications. When using a Wilson amplifier in conjunction with Wilson antennas, the outside antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then amplified and broadcast from the inside antenna to the surrounding area. Cell phones and mobile broadband data cards in that area then communicate with the improved signal. When a cell phone or cellular device transmits, the signal is received by the inside antenna, amplified by the amplifier and broadcast back to the cell tower through the outside antenna.
Wilson SOHO Cellular Amplifier / Repeater Features:
- Wireless operation. No physical connection to your phone is required.
- For 800 MHz Cellular and 1900 MHz PCS Bands
- Works on all generations of CDMA, TDMA AND GSM Including AT&T, Sprint, T-Mobile, Verizon, etc. (Not for Sprint/Nextel iDen Networks. See iDen Cellular Repeaters)
- Automatic gain adjusting to prevent oscillation
- Gain Indicator lights
- Automatic shutdown on overload
- Maximum +30 dBm output power
- Receiver sensitivity -110 dBm CDMA 1% FER
- AC power supply included
- FCC and IC type accepted .
Benefits
- A cellular amplifier designed specifically for small office and home office environments, apartments, high rises, condominiums, and dormitories.
- Greatly reduces disconnects and drop outs
- Significantly improves voice and data signal quality
- Has up to 10 times more power than your cell phone or laptop data card
- Significantly improves voice and data signal quality
- Improves data communication rates needed for 3G technologies
- Receives and transmits better than a cell phone or cellular data card
- Allows multiple cell phones and cellular data cards to be used at the same time
- Extends cell phone battery life.
Requires one inside and one outside antenna plus cable (not included). Antenna connectors on the amplifier are FME Male (requires antenna cables with FME Female connectors) IMPORTANT NOTE Requires at least 25 feet of separation between Inside and Outside Antenna. Requires fairly good signal outside (2-3 bars min.). The better the outside signal, the more cellular coverage inside the building. See below for estimating improved coverage area.
Wilson SOHO Amplifier / Repeater Specifications
|
Frequency
|
824-849 MHz uplink / 859-894 MHz downlink / 1850-1910 MHz uplink / 1930-1990 MHz downlink
|
|
Gain (Up/Down
|
55 dB @ 800 MHz / 60 dB @ 1900 MHz
|
|
Output Power (Uplink)
|
30.8 dBm (800 MHz), 30.5 dBm (1900 MHz)
|
|
Output Power (Downlink)
|
26.0 dBm (800 MHz), 25.2 dBm (1900 MHz)
|
|
Max RF (Up/Down)
|
+ 30 dBm / + 10 dBm
|
|
Noise Figure (typical)
|
3.5 dB / 6 dB nominal
|
|
Isolation
|
> 90 dB
|
|
Power Requirements
|
110-240 V AC, 50-60 Hz, 8 W
|
|
Connectors
|
FME-Male 50 ohms (Includes N Male screw on adapters)
|
|
Dimensions
|
5.7 x 4.2 x 1.5 (inches)
|
|
Weight
|
1.5 lbs / 0.7 kg
|
You may also be interested in the following product(s)
Wilson SignalBoost DB Pro Amp Directional Ant/Cbl Kit
$499.95
|
Wilson AG Pro 70 Building Cellular Booster KitAs low as: $731.26 |
Wilson AG PRO 75 Custom Building Cellular Booster KitAs low as: $917.52 |
Wilson AG SOHO 60 Custom Building Cellular Booster SystemAs low as: $429.75 |
Additional Information
| SKU | AP801245 |
|---|---|
| Brand | Wilson Electronics |
| Model | 801245 |
| Connector Type | FME Male |
| Frequency Range | 824-849 MHz uplink / 859-894 MHz downlink / 1850-1910 MHz uplink / 1930-1990 MHz downlink |
| Gain | 55db (800MHz) / 60db (1900MHz) |
| Antenna Category | Amplifiers |
| Accessory Type | Signal Improvement |
| GTIN | 813986004944 |
Check items to add to the cart or select all
You have no items to compare.
