Wilson AG SOHO 60 Cellular Amp Marine Antenna / LP Kit

Wilson Electronics AG SOHO 60 Cellular Amplifier for Marine Applications

This kit includes everything you need to install a powerful cellular signal booster on your boat.

Important: Antenna Separation

The Wilson AG SOHO 60 system requires that you mount the inside and outside antennas at least 25 feet (preferably 50 feet) away from each other. If the antennas are too close together, the signal will oscillate and the amplifier will sense this and shut down to prevent damage.

If getting enough separation between the 2 antennas is not possible, we recommend using a shorter range amplifier such as the Wilson Mobile Wireless system or a direct connect amplifier.

Wilson Marine Cellular Antenna

Wilson's Dual Band (800/MHz / 1900MHz) Marine antenna is weatherproof, fiberglass-encased, omni-directional and ideal for many marine applications including small boats, large boats, cabin cruisers, yachts, etc. More Marine Antenna Information

Wilson Low Profile Antenna

Wilson Low Profile cellular antenna is carefully designed to minimize loss and maximize gain on both the 800 MHz and 1900 MHz bands. Wilson's innovative design results in high efficiency with low losses and will get the most signal to and from your cellular phone. More Low Profile Antenna Information.

About the Wilson AG SOHO 60 Booster System

The Wilson SOHO amplifier greatly improves signal strength inside a building when using your cell phone. It does this without physical connection to your phone allowing you to walk around freely during a call. It even allows cell phones and/or Mobile Broadband cards to be used simultaneously. Works for most 800MHz and 1900MHz range networks including CDMA, TDMA, GSM within the US and Canada (NOTE: Will Not work for Nextel iDen or Mike/Telus Networks.

The Wilson SOHO 60 delivers gain that can be adjusted. The adjustable range is from 30db to 60db For 1900MHz frequencies and 25db to 55db for 800MHz frequencies. The gain can be adjusted in 5db increments. Adjustable gain amplifiers make installation easier with more flexibility. If there either frequency range is stronger than then other causing oscillation, you can adjust the gain without having to purchase a different amplifier.

This Kit Comes With:

• Wilson SOHO 60 Amplifier (801245)
• AC Power Supply
• Wilson Marine Antenna (301130) with Mount (901119)
• 30 foot LMR-400 Cable (952330)
• FME Male / N Female Connector (AC971108)- Used to connect LMR-400 Cable to Antenna
• 1 Wilson Low Profile Antenna (14ft cable) (301106)
• 2 - FME F / N F connectors (for use with optional Wilson 9913 and LMR 400 cable if needed).
• Instructions

Surge Protector

Optional Wilson Lightning Surge Protector AM859902 recommended (not included).

Also See:

• Estimating Improved Coverage Area
• Installation Guide

Wilson SOHO Signal Booster Features:

• Wireless operation. No physical connection to your phone is required.
• Adjustable Gain up to 55db for 800MHz and 60db for 1900MHz Frequencies.
• Works on all generations of CDMA, TDMA AND GSM Including AT&T, Sprint, T-Mobile, Verizon, etc. (Not for Sprint/Nextel iDen Networks. See iDen Cellular Repeaters)
• Automatic gain adjusting to prevent oscillation
• Gain Indicator lights
• Automatic shutdown on overload
• Maximum +30 dBm output power
• Receiver sensitivity -110 dBm CDMA 1% FER
• AC power supply included
• FCC and IC type accepted .

Benefits

• A cellular amplifier designed specifically for small office and home office environments, apartments, high rises, condominiums, and dormitories.
• Greatly reduces disconnects and drop outs
• Significantly improves voice and data signal quality
• Has up to 10 times more power than your cell phone or laptop data card
• Significantly improves voice and data signal quality
• Improves data communication rates needed for 3G technologies
• Receives and transmits better than a cell phone or cellular data card
• Allows multiple cell phones and cellular data cards to be used at the same time
• Extends cell phone battery life.

IMPORTANT NOTE Requires at least 25 feet of separation between Inside and Outside Antenna. Requires fairly good signal outside (2-3 bars min.) to get good coverage area inside. The better the outside signal, the more cellular coverage inside the building.

Wilson SOHO Amplifier / Repeater Specifications

Wilson Marine Cell Antenna Specifications

• Part Number: 301130
• Frequency Range: 806-894 MHz / 1850-1990 MHz
• Impedance: 50 ohms Antenna
• Gain: 5.12 dBi 806-894MHz / 6.12 dBi 1850-1990 MHz
• Radiation: Omni
• Polarization: Vertical
• Wavelength: 0.9 Wavelength 806-894 MHz / 1.95 Wavelength 1850-1990 MHz
• Ground Plane: Built-In Ground Plane
• Connector: FME Female
• Material: Whip - Stainless Steel / Casing - Fiberglass
• Coax Cable: RG58 - 7 inches / 17.18 cm
• Height: (including coupler): 21 inches
• Mount: Standard 1-inch x 14 thread

Wilson Low Profile Antenna Specificatons

• Frequency Range: 806-894 MHz / 1850-1990 MHz
• Impedance: 50 Ohms / Both Bands Antenna
• Gain: 2.2dBi in 806 - 894 MHz and 3.2dBi in 1850 - 1990 MHz
• System Gain: 10 dB (Up to 10 Times the Signal) of a cell phone used inside a car / truck without an outside antenna.
• Wavelength: 1/3 Wavelength in 806-894 MHz and 3/4 Wavelength in 1850-1990 MHz
• Polarization: Vertical
• Ground Plane: Built in Ground Plane
• Radiation Pattern: Omni when mounted vertical
• Building Mount: 6 in. minimum away from metal
• Height: 5 inches,
• Width: 1.5 inches
• Mount: On Glass w/ Gray 3M VHP Tape or Velcro
• Coax Cable: 14 ft. of RG-58
• Connector: FME Female