Product Description
Wilson AG SOHO 60 Cellular Repeater System
Wilson Small Office / Home Office (SOHO) is one of the most technologically advanced cellular amplifiers on the market today. It's most important feature is patented oscillation shutdown protection, which activates complete shutdown within just a few milliseconds to prevent harmful interference to cell sites. Wilson Electronics AG SOHO 60 signal boosters also offer completely adjustable software-controlled automatic gain control, both on forward and reverse links, which allows the amplifiers to meet CDMA and GSM ACPR requirements. The amplifiers are invisible within CDMA and GSM systems. They also have the capability of following base station power requests which allows maintaining the full power dynamic range of the cell phone.
The Wilson AG SOHO 60 delivers gain that can be adjusted. The adjustable range is from 30db to 60db For 1900MHz frequencies and 25db to 55db for 800MHz frequencies. The gain can be adjusted in 5db increments. Adjustable gain amplifiers make installation easier with more flexibility. If there either frequency range is stronger than then other causing oscillation, you can adjust the gain without having to purchase a different amplifier.
Features
- Adjustable Gain to 60db for 1900MHz and 55db for 800MHz
- Covers most US Cellular Service Providers including AT&T, Verizon, T-Mobile, Sprint (Not Nextel), US Cellular and others.
- 1-3 Rooms (Coverage depends on outside signal, frequency and cable length)
Surge Protector
Optional Wilson Lightning Surge Protector AM859902 recommended (not included).
Also See:
Antenna Separation Requirements (Important)
The Wilson SOHO 60 system requires at least 25 ft of separation between the inside and outside antennas.
Choosing an Outside Building Antenna
An Omni-Directional antenna (Building Mount, Trucker) works best to capture signal from multiple providers in different directions.
Use a Directional Antenna (Panel or Wide Band) when you have a weak outside signal and your are trying to capture a signal from a particular tower or set of towers in one direction.
Antenna Options
Wilson Panel Antenna
The Wilson Panel antenna is typically used as an indoor antenna and is wall mounted but can be ceiling mounted on higher ceilings (10ft or higher). They work well across longer, more narrow areas. Since they typically reach further, they are the prefered inside antenna. The Panel antenna radiates 70 degrees for a more focused beam to reach longer distances. More Panel Antenna Information
Wilson Dome Antenna
The Wilson Dome Antenna is typically ceiling mounted. The Dome antenna radiates 360 degrees from ceiling down for a wider reach. They are the preferred antenna for lower ceilings to cover a wider antenna than a Panel antenna. The Vertical Polorized Dome antenna radiates from the ceiling downward. Use to get the farthest reach downward. The Dual Polorized Dome antenna radiates downward and slightly upwards. Use to radiates above a ceiling. More Dome Antenna Information.
Wilson Low Profile Antenna
Wilson Low Profile cellular antenna is carefully designed to minimize loss and maximize gain on both the 800 MHz and 1900 MHz bands. Wilson's innovative design results in high efficiency with low losses and will get the most signal to and from your cellular phone. More Low Profile Antenna Information.
Building Mount Omni Directional Antenna
Wilson Building Mount Omni-Directional Antenna covers 800/1900MHz frequencies. It is omni-directional. If you are trying to boost the signal from several service providers where their towers are in different directions, this is the preferred antenna. If you are trying to cover one service provider tower, consider the higher gain Wilson Wide Band Directional Antenna. More Wilson Building Mount Omni Directional Antenna Information
Wilson Wide Band Directional Antenna
Wilson Wide Band Directional Antenna covers 700-2500MHz frequencies. It is directional and performs best when pointed toward your cellular providers tower. If you are trying to boost the signal from one service provider tower, this is the preferred antenna. If you trying to cover multiple service providers and their towers are in different locations, consider the Building Mount Omni Directional Antenna. More Wilson Wide Band Antenna Information
800MHz Yagi Antenna
Single band 806-894MHz directional antenna. Higher gain antenna for picking up 800MHz frequencies. More 800MHzYagi Antenna Information
1900MHz Yagi Antenna
Single band 1800-1900MHz directional antenna. Higher gain antenna for picking up 1900MHz PCS frequencies. More 1900MHzYagi Antenna Information
Cable Options
Wilson 400 cable is recommended for repeater type system as it is a very low loss cable. RG-58 cable will work fine for shorter runs (less than 30 feet recommended).
Connectors: Match connectors with antenna selected. Most building antennas come with N Female connectors. Wilson 400 cable comes with N Male connectors. The Wilson SOHO amplifier comes with FME Male connectors but also comes with adapter to convert the FME Male to N Female.
About Building Cellular Repeater Systems
An in building cellular repeater system has 3 major components. An outside antenna, amplifier and an inside antenna. The signal is received by the outside antenna from the cell site. It is then amplified and repeated to your cell phone through the inside antenna. When the phone transmits, the signal is received by the inside antenna, amplified, then repeated to the cell site via the outside antenna.
Wilson SOHO 60 Amplifier / Repeater Specifications
|
Frequency
|
824-849 MHz uplink / 859-894 MHz downlink / 1850-1910 MHz uplink / 1930-1990 MHz downlink
|
|
Gain (Up/Down
|
55 dB @ 800 MHz / 60 dB @ 1900 MHz
|
|
Output Power (Uplink)
|
30.8 dBm (800 MHz), 30.5 dBm (1900 MHz)
|
|
Output Power (Downlink)
|
26.0 dBm (800 MHz), 25.2 dBm (1900 MHz)
|
|
Max RF (Up/Down)
|
+ 30 dBm / + 10 dBm
|
|
Noise Figure (typical)
|
3.5 dB / 6 dB nominal
|
|
Isolation
|
> 90 dB
|
|
Power Requirements
|
110-240 V AC, 50-60 Hz, 8 W
|
|
Connectors
|
FME-Male 50 ohms (Includes N Male screw on adapters)
|
|
Dimensions
|
5.7 x 4.2 x 1.5 (inches)
|
|
Weight
|
1.5 lbs / 0.7 kg
|
Additional Information
| SKU | AP801245BK |
|---|---|
| Brand | Wilson Electronics |
| Model | N/A |
| Connector Type | No |
| Frequency Range | No |
| Gain | 55db (800MHz) / 60db (1900MHz) |
| Antenna Category | Amplifier Kits |
| Accessory Type | Signal Improvement |
| GTIN | No |
| Compatible Devices | N/A |
Check items to add to the cart or select all
You have no items to compare.
