Product Description
Wilson AG SOHO 60 Cellular Amplifier with Antennas and Cable Kit
The Wilson Electronics AG SOHO 60 DualBand cellular amplifier repeater. The Wilson AG SOHO 60 amplifier greatly improves signal strength inside a building when using your cell phone or cellular data device. It does this without physical connection to your phone allowing you to walk around freely during a call. Works for most 800MHz and 1900MHz range networks including CDMA, TDMA, GSM within the US and Canada (NOTE: Will Not work for Sprint/Nextel iDen or Mike/Telus Networks.
The Wilson Electronics AG SOHO 60 delivers gain that can be adjusted. The adjustable range is from 30db to 60db For 1900MHz frequencies and 25db to 55db for 800MHz frequencies. The gain can be adjusted in 5db increments. Adjustable gain amplifiers make installation easier with more flexibility. If there either frequency range is stronger than then other causing oscillation, you can adjust the gain without having to purchase a different amplifier.
This Kit Comes With:
- Wilson AG SOHO 60 Signal Booster
- AC Power Supply
- Wilson Trucker Antenna with 3 Way Mount (12 ft Cable)
- 10ft RG-58 Extension cable
- 1 Wilson Low Profile Antenna (14ft cable)(301106)
- 2 - FME F / N F connectors (for use with optional Wilson 9913 and LMR 400 cable if needed).
- Instructions
Surge Protector
Optional Wilson Lightning Surge Protector AM859902 recommended (not included). If there is lightning in your area, protect your equipment with a Lightning surge protector.
Antennas
About Wilson Low Profile Antenna
Wilson Low Profile cellular antenna is carefully designed to minimize loss and maximize gain on both the 800 MHz and 1900 MHz bands. Wilson's innovative design results in high efficiency with low losses and will get the most signal to and from your cellular phone. More Low Profile Antenna Information.
About Wilson Trucker Antenna
Wilson's most popular model. Mounts on a standard 3/8-24 thread female mount and includes 12 feet of RG-58 low loss coax cable with FME Female Nipple connector. Total length is 32 inches. Works in homes and on trucks, buses, boats, etc. The Trucker antenna includes a 3 Way Mount for mounting on poles, pipe or side of building.More Wilson Trucker Antenna Information
Also See:
About Building Cellular Repeater Systems
The Wilson AG SOHO 60 is a small, bi-directional amp that delivers service levels consistent with what would be expected in areas of high cell network coverage. They amplify a weak or shadowed cellular signal and repeat it in an in-building small office / home office (SOHO) applications. When using a this amplifier in conjunction with antennas, the outside antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then amplified and broadcast from the inside antenna to the surrounding area. Cell phones and mobile broadband data cards in that area then communicate with the improved signal. When a cell phone or cellular device transmits, the signal is received by the inside antenna, amplified by the amplifier and broadcast back to the cell tower through the outside antenna.
Wilson AG SOHO 60 Features:
- Wireless operation. No physical connection to your phone is required.
- Adjustable Gain: Up to 55db for 800 MHz & 60db for 1900 MHz PCS Bands
- Works on all generations of CDMA, TDMA AND GSM Including AT&T, Sprint, T-Mobile, Verizon, etc. (Not for Sprint/Nextel iDen Networks. See iDen Cellular Repeaters)
- Automatic gain adjusting to prevent oscillation
- Gain Indicator lights
- Automatic shutdown on overload
- Maximum +30 dBm output power
- Receiver sensitivity -110 dBm CDMA 1% FER
- AC power supply included
- FCC and IC type accepted .
Benefits
- A cellular amplifier designed specifically for small office and home office environments, apartments, high rises, condominiums, and dormitories.
- Greatly reduces disconnects and drop outs
- Significantly improves voice and data signal quality
- Has up to 10 times more power than your cell phone or laptop data card
- Significantly improves voice and data signal quality
- Improves data communication rates needed for 3G technologies
- Receives and transmits better than a cell phone or cellular data card
- Allows multiple cell phones and cellular data cards to be used at the same time
- Extends cell phone battery life.
IMPORTANT NOTE Requires at least 25 feet of separation between Inside and Outside Antenna. Requires fairly good signal outside (2-3 bars min.) to get good coverage area inside. The better the outside signal, the more cellular coverage inside the building.
Wilson AG SOHO 60 Specifications
|
Frequency
|
824-849 MHz uplink / 859-894 MHz downlink / 1850-1910 MHz uplink / 1930-1990 MHz downlink
|
|
Gain (Up/Down
|
55 dB @ 800 MHz / 60 dB @ 1900 MHz
|
|
Output Power (Uplink)
|
30.8 dBm (800 MHz), 30.5 dBm (1900 MHz)
|
|
Output Power (Downlink)
|
26.0 dBm (800 MHz), 25.2 dBm (1900 MHz)
|
|
Max RF (Up/Down)
|
+ 30 dBm / + 10 dBm
|
|
Noise Figure (typical)
|
3.5 dB / 6 dB nominal
|
|
Isolation
|
> 90 dB
|
|
Power Requirements
|
110-240 V AC, 50-60 Hz, 8 W
|
|
Connectors
|
FME-Male 50 ohms (Includes N Male screw on adapters)
|
|
Dimensions
|
5.7 x 4.2 x 1.5 (inches)
|
|
Weight
|
1.5 lbs / 0.7 kg
|
Wilson Electronics Trucker Antenna Specifications:
- Frequency Range: 806-894 MHz, 1850-1990 MHz
- VSWR:
- 1.9:1 Average across 806-894 MHz
- 1.8:1 Average across 1850-1990 MHz
- Impedance: 50 ohms / both bands
- Antenna Gain:
- 5.12 dbi (3 dbd) 806 - 894 MHz
- 6.12 dbi (3 dbd)1850 - 1990 MHz
- Radiation: Omni
- Polarization: Vertical
- Wave:
- 9 wave length 806-894 MHz
- 1.95 wave length 1850-1990 MHz
- Ground Plane: Independent Ground Plane (except NMO mounts which use the vehicle's metal as a ground plane)
Mechanical Properties:
- Connecter: FME-Female
- Material: Whip
- Stainless Steel
- Fiberglass - Spiral Wound
- Coax Cable: RG-58 / 12'
- Height: 32"
- Mount: Standard CB 3/8 X 24 thread. (NMO and RV mounted Truckers also available)
- Part #: 308401
Wilson Low Profile Antenna Specificatons
- Frequency Range: 806-894 MHz / 1850-1990 MHz
- Impedance: 50 Ohms / Both Bands Antenna
- Gain: 2.2dBi in 806 - 894 MHz and 3.2dBi in 1850 - 1990 MHz
- System Gain: 10 dB (Up to 10 Times the Signal) of a cell phone used inside a car / truck without an outside antenna.
- Wavelength: 1/3 Wavelength in 806-894 MHz and 3/4 Wavelength in 1850-1990 MHz
- Polarization: Vertical
- Ground Plane: Built in Ground Plane
- Radiation Pattern: Omni when mounted vertical
- Building Mount: 6 in. minimum away from metal
- Height: 5 inches,
- Width: 1.5 inches
- Mount: On Glass w/ Gray 3M VHP Tape or Velcro
- Coax Cable: 14 ft. of RG-58
- Connector: FME Female
- Part #: 301106
You may also be interested in the following product(s)
Wilson SignalBoost DB Pro Amp Directional Ant/Cbl Kit
$499.95
|
Wilson AG Pro 70 Building Cell SignalBooster Bundle KitAs low as: $731.26 |
Additional Information
| SKU | AP801245K |
|---|---|
| Brand | Wilson Electronics |
| Model | 801245K |
| Connector Type | FME Male / N Male |
| Frequency Range | 824-849 MHz uplink / 859-894 MHz downlink / 1850-1910 MHz uplink / 1930-1990 MHz downlink |
| Gain | 55db (800MHz) / 60db (1900MHz) |
| Antenna Category | Amplifier Kits |
| Accessory Type | Signal Improvement |
| GTIN | No |
| Compatible Devices | No |


