Product Description
Wilson Electronics AG SOHO 60 Building Cellular SignalBooster Kit
The Wilson Small Office / Home Office (SOHO) DualBand cellular amplifier repeater. Boost the cellular signal going into your small building for your cell phone or cellular data device.
The SOHO can typically cover 1-2 rooms (depending on outside signal strength) and handle up to 5 users simultaneously.
The Wilson AG SOHO 60 wireless amplifier greatly improves signal strength inside a building when using your cell phone. It does this without physical connection to your phone allowing you to walk around freely during a call. It even allows up to two cell phones and/or Data Cards to be used simultaneously. Works for most 800MHz and 1900MHz range networks including CDMA, TDMA, GSM within the US and Canada (NOTE: Will Not work for Sprint/Nextel iDen or Mike/Telus Networks.)
Kit Includes:
- Wilson AG SOHO 60 Amplifier / Repeater (801245)
- AC/DC wall transformer
- Wilson Wide Band Wedge Directional Antenna with mounting hardware. (304411)
- Wilson Dual Band Panel Antenna (301135)
- 20 ft RG 58 Coax (951104)
- 30 ft Wilson 400 Coax (952330)
- N Female to FME Male Connector (971108)
Surge Protector
Optional Wilson Lightning Surge Protector AM859902 recommended (not included).
Antennas
Wilson Panel Antenna
The Wilson Panel antenna is typically used as an indoor antenna and is wall mounted but can be ceiling mounted on higher ceilings (10ft or higher). They work well across longer, more narrow areas. Since they typically reach further, they are the prefered inside antenna. The Panel antenna radiates 70 degrees for a more focused beam to reach longer distances. More Panel Antenna Information
Wilson Wide Band Directional Antenna
Wilson Wide Band Directional Antenna covers 700-2500MHz frequencies. It is directional and performs best when pointed toward your cellular providers tower. If you are trying to boost the signal from one service provider tower, this is the preferred antenna. If you trying to cover multiple service providers and their towers are in different locations, consider the Building Mount Omni Directional Antenna. More Wilson Wide Band Antenna Information
Using the directional antenna included in this kit will improve the coverage area inside. This directional antenna focuses a higher gain towards your provider's tower. It also reduces the separation requirement between the inside and outside antenna to about 20 ft (inside and outside antenna must be pointed away for each other.) The down side of using a directional antenna is that it focuses towards one direction. If you are trying to improve the signal for multiple service providers and their towers are in opposite directions, the coverage of one service provider may be weaker.If this is the case, consider a SOHO kit with an omni directional outside antenna.
Also See:
About the Wilson AG SOHO 60 System
The Wilson AG SOHO 60 is a small, bi-directional cellular amplifier that delivers service levels consistent with what would be expected in areas of high cell network coverage. They amplify a weak or shadowed cellular signal and repeat it in an in-building small office / home office (SOHO) applications. When using this cellular signal amplifier in conjunction with Wilson antennas, the outside antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then amplified and broadcast from the inside antenna to the surrounding area. Cell phones and cellular data cards in that area then communicate with the improved signal. When a cell phone or cellular device transmits, the signal is received by the inside antenna, amplified by the amplifier and broadcast back to the cell tower through the outside antenna.
Wilson SOHO Features:
- Wireless operation. No physical connection to your phone is required.
- For 800 MHz Cellular and 1900 MHz PCS Bands
- Works on all generations of CDMA, TDMA AND GSM Including AT&T, Sprint, T-Mobile, Verizon, etc. (Not for Sprint/Nextel iDen Networks. See iDen Cellular Repeaters)
- Automatic gain adjusting to prevent oscillation
- Gain Indicator lights
- Automatic shutdown on overload
- Maximum +30 dBm output power
- Receiver sensitivity -110 dBm CDMA 1% FER
- AC power supply included
- FCC and IC type accepted .
Benefits
- A cellular amplifier designed specifically for small office and home office environments, apartments, high rises, condominiums, and dormitories.
- Greatly reduces disconnects and drop outs
- Significantly improves voice and data signal quality
- Has up to 10 times more power than your cell phone or laptop data card
- Significantly improves voice and data signal quality
- Improves data communication rates needed for 3G technologies
- Receives and transmits better than a cell phone or cellular data card
- Allows multiple cell phones and cellular data cards to be used at the same time
- Extends cell phone battery life.
Wilson SOHO Amplifier / Repeater Specifications
|
Frequency
|
824-849 MHz uplink / 859-894 MHz downlink / 1850-1910 MHz uplink / 1930-1990 MHz downlink
|
|
Gain (Up/Down
|
55 dB @ 800 MHz / 60 dB @ 1900 MHz
|
|
Output Power (Uplink)
|
30.8 dBm (800 MHz), 30.5 dBm (1900 MHz)
|
|
Output Power (Downlink)
|
26.0 dBm (800 MHz), 25.2 dBm (1900 MHz)
|
|
Max RF (Up/Down)
|
+ 30 dBm / + 10 dBm
|
|
Noise Figure (typical)
|
3.5 dB / 6 dB nominal
|
|
Isolation
|
> 90 dB
|
|
Power Requirements
|
110-240 V AC, 50-60 Hz, 8 W
|
|
Connectors
|
FME-Male 50 ohms (Includes N Male screw on adapters)
|
|
Dimensions
|
5.7 x 4.2 x 1.5 (inches)
|
|
Weight
|
1.5 lbs / 0.7 kg
|
Wilson Wide Band Directional Antenna Specifications
- Frequency Range: 700 - 2500 MHz
- Gain: 8 - 10 dBi
- Horizontal Beam width: 70° to 90°
- Vertical Beam width: 85° to 110°
- F/B ratio: >20 dB
- Nominal Impedance: 50 ohms
- Polarization: Vertical
- Maximum Power: 100 watts
- Connector: N-Female
- Dimension: 11.42” x 8.27” x 2.56” In / 290 x 210 x 65 mm
- Weight: 3.31 lbs / 1.5 Kg
- Temperature Range: -40° to 158° F / -40° to 70° centigrade
- Rated Wind Velocity: 134 MPH / 60 m/s
- Lightning Protection: DC grounded
Wilson 50 Ohm Wall Mount Panel Antenna Specifications:
- Frequency Ranges:
- 700 - 800mHz ... Gain: 5.2dbi
- 824-894MHz ... Gain: 4.4dbi
- 880-960MHz ... Gain: 4.2dbi
- 1710-1880MHz ... Gain: 10.0dbi
- 1850-1990MHz ... Gain: 10.6dbi
- 2110-2170MHz ... Gain: 8.2dbi
- Nominal Impedance: 50 Ohms / Both Bands
- Beamwidth in Hor. Plane: 70 / 60
- Beamwidth in Ver. Plane: 50 / 45
- F/B: >=20 db
- Polarization: Vertical
- VSWR: <= 1.5
- Ground Plane: Built in Ground Plane
- Dimensions: 8.27 x 7.09 x 1.73in or 21 x 18 x 4.39cm
- Weight: 1.32 lbs or .6 kg
- Connector: N Female
Additional Information
| SKU | AP841245WK |
|---|---|
| Brand | Wilson Electronics |
| Model | 841245WK |
| Connector Type | FME / N |
| Frequency Range | 800Mhz & 1900MHz |
| Gain | 55db (800MHz) / 60db (1900MHz) |
| Antenna Category | Amplifier Kits |
| Accessory Type | Signal Improvement |
| GTIN | No |
