Product Description
DualBand In Building Cellular Repeater System
Combine 2 single band amplifiers to create one dual band system. Build a custom, dual band in building cellular amplifier. Select cable and other components. A dual band system will cover 800MHz and 1900MHz frequencies for most service providers including AT&T, Sprint, T-Mobile, Verizon, etc. (Note: Will not work with iDen 800MHz, 900MHz such as Nextel, BoostMobile, SoutherLinc. See iDen Amplifiers)
What You Will Need
- 1 - 800MHz Amplifier
- 1 - 1900MHz Amplifier
- 2 - Outside Antennas (1-800MHz and 1-1900MHz or 2 DualBand Antenna)
- 2 - Outside Cable Lengths
- 1 or 2 - Inside Antennas (You can combine 2 amplifiers to go to 1 inside antenna)**
- 1 or 2 - Inside Cable Lengths
- 2 - Lightning Surge Protectors (optional but recommended to protect amplifiers from lightining strikes.)
About Cellular Repeater Systems
An In Building cellular repeater system has 3 major components.
- Outside Antenna(s)
- Cellular Frequency Amplifier
- Inside Antenna(s)
About the Wilson Building Amplifiers
Wilson Electronics’ bi-directional in building amplifiers are the most technologically advanced cellular systems on the market today. Their most important feature is their patented oscillation shutdown protection, which activates complete shutdown within just a few milliseconds to prevent harmful interference to cell sites.
Wilson Electronics' in building amplifiers also offer completely adjustable software-controlled automatic gain control, both on forward and reverse links, which allows the amplifiers to meet CDMA and GSM ACPR requirements. The amplifiers are invisible within CDMA and GSM systems. They also have the capability of following base station power requests which allows maintaining the full power dynamic range of the cell phone.
Also See:
Antenna Separation Requirements (Important)
Use the following guidelines when planning your setup:
- 800MHz - 50db Amps - at least 50 feet apart (40 feet if roof is constructed of metal or heavy concrete)
- 800MHz - 60db/65db Amps - at least 75 feet apart (50 feet if roof is constructed of metal or heavy concrete)
- 1900MHz - 65db Amps - at least 68 feet apart (60 feet if roof is constructed of metal or heavy concrete)
How to approximate inside cellular coverage area.
Additional Information
| SKU | AP801DBCBK |
|---|---|
| Brand | Wilson Electronics |
| Connector Type | No |
| Frequency Range | 800MHz and 1900MHz |
| Gain | 65db |
| Antenna Category | Amplifier Kits |
| Accessory Type | Signal Improvement |
| GTIN | No |
You have no items to compare.
