Wilson SignalBoost Mini-Amp Antenna/Cradle *DISC

Wilson SignalBoost Mini-Amp Cellular Power Booster

Wilson Dual Band In Vehicle Cellular Amplifier / Repeater For Cars, Trucks and RV's Boost the cellular signal inside your vehicle with the Wilson SignalBoost Mini-Amp cellular power booster. Improve cellular reception for both cellular phones and data cards. The Wilson SignalBoost Mini-Amp operates with no direct connection to your phone or broadband PC Card and supports multiple users in your vehicle. It amplifies signals from most cellular service providers using 800MHz and 1900MHz frequencies. The units microprocessor-controlled circuitry ensures reliable operation within regulatory standards.

Amplifier Kit Comes With:

• Wilson SignalBoost Mini-Amp
• Phone Cradle with Built In Antenna
• Cigarette Lighter Power Cord.
• 12-inch Magnet-Mount Antenna (AE301125) for outside
• Install Guide

SignalBoost Mini-Amp Installation Guide

IMPORTANT: For external antenna use a magnetic mount, pole mount or hole mount antenna (see kits below). Do not use a glass mount antenna. The Wilson SignalBoost Mini-Amp install in minutes with no special tools required The Mini-Amp is small and portable so you can easily move it from vehicle to vehicle.

How It Works

The Wilson SignalBoost Mini-Mobile Amp is comprised of two internal amplifiers that amplify a cell device's signal, to and from cell towers, unlike some amplifiers in the the market. Signals from a tower are picked up by the roof mounted antenna and sent to the first amplifier's receiver, which then boosts and re broadcasts the stronger signal inside the vehicle through the inside antenna. The sensitivity of the Wilson's design makes it capable of receiving signals that are weaker than most cell phones can receive., thereby significantly improving performance of cell phones (or data cards) inside a vehicle. The signal from the cell device is amplified by a second internal amplifier, which sends the signal back the cell tower with up to 6 times more power than a typical cell phone. The Wilson SignalBoost Mini- Amp extends overall signal range, allowing you to communicate with fewer dropped calls and from places you never could before!

Wilson Mobile Wireless Amp Features

• Installs in minutes no special tools required
• Portable - can easily be moved between vehicles
• Wireless operation - no physical connection to cell phone or data card
• Supports multiple users in vehicle
• Amplifies signals to and from the cell site on both 800MHz and 1900MHz frequencies
• Microprocessor-controlled circuitry ensures reliable operation within regulatory standards
• Build-in antenna in the phone cradle permits hands-free operation
• Improves signals for both voice and data
• Six times more power than a typical cell phone
• DC power supply included (cigarette lighter type), AC power supply sold separately
• FCC and Industry Canada (IC) Type Accepted

Wilson DualBand Repeater Specifications

• Frequency 824-894 MHz / 1850-1990 MHz
• Gain 40 dB / 45 dB
• Max Output Power 1.5 watts
• Max RF 31.7 dBm
• Noise Figure 3.5 dB nominal
• Flatness ± 3.5 dB / ± 4 dB
• Isolation > 90 dB
• Power Requirements 6V, 0.6A - 2A (subject to uplink power)
• Connectors SMA Female
• Dimensions 3.25 x 3.25 x 1 (inches) or 9.6 x 8.1 x 3.8 (cm)
• Weight 4 oz or 0.11 kg