Product Description
Wilson SignalBoost DB Pro - Directional / Dome Antenna
The Wilson SignalBoost DB Pro DualBand adjustable gain cellular repeater greatly improves signal strength for any cellular device inside a building on most networks. It does not require any physical connection to your phone allowing you to walk around freely during a call. It even allows multiple cell phones and/or Data Cards to be used simultaneously.
The SignalBoost DB Pro is adjustable gain in 5db increments up to 62db for 800MHz and 65db for 1900MHz.
SignalBoost DB Pro Kit Includes:
- Wilson SignalBoost DB Pro Amplifier (801262)
- 6 volt AC/DC Power Supply
- Instruction Manual
- Wilson Directional Wedge Antenna with mounting hardware (304475)
- Wilson Dual Band 75 ohm Dome Antenna (301151)
- RG-6 Quad Shield Coax Cable:
- 1 ea. - 20’
- 1 ea. - 30’
- 1 ea. - 50’
- 1 barrel connectors F-female to F-female to combine lengths.
Surge Protector
Optional Wilson Lightning Surge Protector AM859988 recommended.
IMPORTANT NOTE
Requires at least 50 feet of separation between Inside and Outside Antenna Requires fairly good signal outside (2-3 bars min.). The better the outside signal, the more cellular coverage inside the building. See below for estimating improved coverage area. All components are interconnected using standard TV cable (RG-6) which is easily available and often found pre-installed, simplifying cable runs.
Coverage Area and Installation Information:
Outside Directional Antenna Usage
Using the directional antenna included in this kit will improve the coverage area inside. This directional antenna focuses a higher gain towards your provider's tower.
Wilson Wide Band Directional Antenna (304475)
Wilson Wide Band Directional Antenna covers 700-2500MHz frequencies. It is directional and performs best when pointed toward your cellular providers tower. If you are trying to boost the signal from one service provider tower, this is the preferred antenna. If you trying to cover multiple service providers and their towers are in different locations, consider the Building Mount Omni Directional Antenna. More Wilson Wide Band Antenna Information
Important Note: The down side of using a directional antenna is that it focuses towards one direction. If you are trying to improve the signal for multiple service providers and their towers are in opposite directions, the coverage of one service provider may be weaker. If this is the case, we would recommend the omni directional antenna.
Inside Dome Antenna Usage
This kit includes a ceiling mount Dome Antenna for mounting inside. It has a wider radiation pattern for covering rooms with lower ceilings. Use the kit that includes the Panel Antenna to a more focused signal for higher ceilings or wall mounting.
Wilson Dome Antenna (301151)
The Wilson Dome Antenna is typically ceiling mounted. The Dome antenna radiates 360 degrees from ceiling down for a wider reach. They are the preferred antenna for lower ceilings to cover a wider antenna than a Panel antenna. The Vertical Polorized Dome antenna radiates from the ceiling downward. Use to get the farthest reach downward. The Dual Polorized Dome antenna radiates downward and slightly upwards. Use to radiates above a ceiling. More Dome Antenna Information.
About Building Cellular Amplifiers
The Wilson SignalBoost DB Pro In Building Cellular Amplifier Repeater is a bi-directional (send and receive) amplifier that delivers service levels consistent with what would be expected in areas of high network coverage. The SignalBoost DB Pro will amplify a weak or shadowed cellular signal and repeat it in an in-building application. When using a Wilson amplifier in conjunction with Wilson antennas, the outside antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then amplified and broadcast from the inside antenna to the surrounding area.
Cellular Amplifier for use in Homes, Offices, Portable Buildings, Hangers and Other Buildings.
Cell phones and cellular data cards in that area then communicate with the improved signal. When a cell phone or cellular device transmits, the signal is received by the inside antenna, amplified by the amplifier and broadcast back to the cell tower through the outside antenna.
-
Wilson DB Pro Cellular Amplifier Features:
- Has up to 20 times more power than your cell phone or laptop data card
- Significantly improves voice and data signal quality
- Improves data communication rates needed for 3G technologies
- Uses commonly installed and available 75 ohm RG-6 Cable
- Wireless operation. No physical connection to your phone is required.
- Powerful 65db Gain For 800 MHz Cellular and 1900 MHz PCS Bands
- Works on all generations of CDMA, TDMA AND GSM Including AT&T, Sprint, T-Mobile, Verizon, etc. (Not for Nextel iDen Networks. See iDen Cellular Repeaters)
- Automatic gain adjusting to prevent oscillation
- Gain Indicator lights
- Automatic shutdown on overload
- Cell site friendly design
- FCC and Industry Canada type accepted
Wilson DB Pro Cellular Amplifier / Repeater Specifications
- Frequency 824-894 MHz / 1850-1990 MHz
- Gain (Up/Down 62 dB @ 800 MHz / 65 dB @ 1900 MHz
- Flatness +- 5 dB
- Max Output Power 2.5 Watts
- Max RF (Up/Down) + 34 dBm / + 15.7 dBm
- Noise Figure (typical) 3.5dB nominal
- Isolation > 90 dB
- Power Requirements 120 - 240V AC, 50-60 Hz, 8 W
- Connectors F-Female
- Dimensions 6.2 x 4.2x 1.5 (inches) 15.7 x 10.7 x 3.8 (cm)
- Weight .64 lbs / 0.29 kg
Wilson 75 Ohm Wide Band Directional Antenna (304475) Specifications
- Frequency Rang: 700-2500 MHz
- Horizontal Beam width: 70° to 90°
- Vertical Beam width: 85° to 110°
- F/B ratio: >20 dB
- Nominal Impedance: 75 ohms
- Polarization: Vertical
- Maximum Power: 100 watts
- Connector: F Female
- Dimension: 11.42” x 8.27” x 2.56” In / 290 x 210 x 65 mm
- Weight: 3.31 lbs / 1.5 Kg
- Temperature Range: -40° to 158° F / -40° to 70° centigrade
- Rated Wind Velocity: 134 MPH / 60 m/s
- Lightning Protection: DC grounded
- Part #: 304475
Wilson Electronics 75 Ohm Dome Antenna (301151) Specifications
- Frequency Range: 800 - 910 MHz / 1800 - 1990MHz
- Impedance: 75 Ohms / Both Bands
- Antenna Gain: 2.5dbi
- Max Power: 50 Watts
- Polarization: Vertical
- Beam Width Horizontal: 360 degrees
- Beam Width Vertical: 120 degrees
- Ground Plane: Built in Ground Plane
- Connector: F Female
- Diam: 8 in. / 20.32cm
- Weight: 1.4 lb
- Part #: 301151
Additional Information
| SKU | AP841263WBD |
|---|---|
| Brand | Wilson Electronics |
| Model | 841262WBD |
| Connector Type | F |
| Frequency Range | 824-894 MHz / 1850-1990 MHz |
| Gain | 62db @ 1800MHz / 65db @ 1900MHz |
| Antenna Category | Amplifier Kits |
| Accessory Type | Signal Improvement |
| GTIN | No |
