This NETGEAR MBR1210 external antenna adapter allows you connect an external antenna (not included) to the MBR1210 to improve cellular signal. A better cellular signal means faster data transfer speeds.
6 inch RG174 cable with Reverse Polarity TNC M and FME Male connectors.
Requires external cellular antenna sold separately. Shop NETGEAR MBR1210 Antenna Kits.
WARNING - To purchase this product, you must read this warning and agree to purchase and use this product at your own risk. Although it's rare, using this external antenna adapter can damage your device and void it's warranty. When an external antenna adapter is inserted into the port on your mobile device, your device's antenna is disconnected so that your device can receive signal through an external antenna. When you remove the adapter, your device's antenna should reconnect. If it does not, your device will show a weak or no signal and no service. This means that the switch that connects and reconnects the adapter is damaged or stuck. Despite the adapter manufacturer's testing, some devices may have weak ports and be damaged using this product. Damage may also be caused by pushing adapters in too far, twisting the connector when inserting or removing and by pulling on the adapter cable. As an alternative, we recommend a powered signal booster that does not require a connection through your devices RF port. These signal boosters will perform better than just an antenna directly connected to your device without the risk of plugging in an antenna adapter.
You may also be interested in the following product(s)
|Connector Type||RP TNC MALE|
|Connector Type 2||FME MALE|
|Accessory Type||Antenna Misc|
|Antenna Category||Device Adapters|