Product Description
Wilson iDen 800MHz 60db Smart Technology Building Amplifier
Eliminate Dropped or Missed Calls Speed Up Cellular Data Transmission. Do you have a good cellular signal outside your building but little to no signal inside the building? This Wilson iDen Smart Technoogy amplifier works by picking up a stronger signal from an antenna mounted on a pole or wall outside your building or high on a window inside your building, facing the cell site. The amplifier increases the signal and transmits it through the inside antenna to your cell phone or laptop data card.
Improves cellular coverage area for iDen 800MHz frequencies including Nextel, BoostMobile, SouthernLinc and MIKE networks.
Important Nextel Frequency Change: Frequencies in some Nextel areas inside the US are changing to 900MHz. If you are in one of these areas, our current iDen amplifiers will not work to improve your signal. Read Nextel Frequency Change
Wilson's Building Amplifiers offer exceptional performance without causing harmful interference to the cell site.
Wilson Electronics’ non down-converted bi-directional amplifiers are the most technologically advanced cellular amplifiers on the market today. Their most important feature is patented oscillation shutdown protection, which activates complete shutdown within just a few milliseconds to prevent harmful interference to cell sites. Wilson amplifiers also offer completely adjustable software-controlled automatic gain control, both on forward and reverse links, which allows the amplifiers to meet CDMA and GSM ACPR requirements. The amplifiers are invisible within CDMA and GSM systems. They also have the capability of following base station power requests which allows maintaining the full power dynamic range of the cell phone.
Also See:
Features
- Wireless operation. No physical connection to your phone is required.
- Automatic Gain Adjusting in the event of oscillation and /or overload
- Automatic shutdown on overload
- TIA/EIA-98-E 3.5.1 Receiver Sensitivity better than -110 dBm
- Allows multiple phones to be use simultaneously.
- Your phone will use less battery power for longer battery life.
- Two inside antennas can be used using the Wilson 2 Way Splitter
Antenna Separation Requirements (Important)
A building amplifier system requires at least two antennas (not included). One antenna for outside and one for inside. The outside antenna must be a certain distance away from the inside antenna. IMPORTANT: The distance must be actual distance between the inside and outside antennas not just cable length. This amplifier requires at least 75 feet apart (50 feet if roof is constructed of metal or heavy concrete) of seperation between the inside and outside antenna. Do not turn on your amplifier unless you have at least the above distances between the inside and outside antenna. These distances must be maintained or the signal will just oscillate between the two antennas and no improvement will be noticed. Also, not enough separation can damage the amplifier.
Specifications
- iDen Frequency 806-821 MHz Uplink, 851-866 MHz Downlink
- Gain 60 dB max
- Max Output Power: Up to 3 watts
- Max RF + 30 dBm uplink / +30 dBm downlink
- Noise Figure 3 dB nominal
- Flatness ± 2.5 dB
- Isolation > 90 dB
- Power Requirements 120 V AC / 3 A max
- Connectors N-Female
- Dimensions 5.6 x 3.6 x 1.7 (inches)
- Weight 1.5 lbs or 0.7 kg
You may also be interested in the following product(s)
Wilson SmartTech Custom In-Building Amp SystemFrom: $374.35 To: $2,429.04 |
Additional Information
| SKU | AP804006 |
|---|---|
| Brand | Wilson Electronics |
| Model | 804006 |
| Connector Type | N Female |
| Frequency Range | 806-866 MHz |
| Gain | 60 db |
| Antenna Category | Amplifiers |
| Accessory Type | Signal Improvement |
| GTIN | 813986004814 |
Check items to add to the cart or select all
You have no items to compare.
