Product Description
Wilson Smart Technology In-Building Bi-Directional Cellular Amplifier / Repeater System
Wilson Smart Technology Building 1900Mhz frequency amplifier. Wilson Electronics’ non down-converted bi-directional amplifiers are the most technologically advanced cellular amplifiers on the market today. Their most important feature is patented oscillation shutdown protection, which activates complete shutdown within just a few milliseconds to prevent harmful interference to cell sites. Wilson amplifiers also offer completely adjustable software-controlled automatic gain control, both on forward and reverse links, which allows the amplifiers to meet CDMA and GSM ACPR requirements.
Building Cellular Repeater Kit Comes With
- Wilson 1900MHz 65db Building Amplifier (801365)
- Wilson 1900MHz YAGI Antenna (301124)
- Wilson Wall Mount Panel Antenna (301135)
- 20 foot Wilson 400 Cable (952320)
- 50 foot Wilson 400 Cable (952350)
Also See:
Antenna Separation Requirements (Important)
The Wilson wireless building amplifier requires at least two antennas (not included). One antenna for outside and one for inside. The outside antenna must be at least 60 feet apart (50 feet if roof is constructed of metal or heavy concrete) away from the inside antenna. The distance must be actual distance between the inside and outside antennas not just cable length. Do not turn on your amplifier unless you have at least the above distances between the inside and outside antenna. These distances must be maintained or the signal will just oscillate between the two antennas and no improvement will be noticed. Also, not enough separation can damage the amplifier.
Wilson Building Repeater Features
- Larger area signal improvement
- Improve signal without connecting to phone
- Multiple users
- Works best if signal outside is good (building structure is blocking signal)
- Most expensive
- 1900Hz Single Band, Frequency Specific
- Home, Office, Warehouse, Hanger
Wilson's In-Building Amplifiers offer exceptional performance without causing harmful interference to the cell site.
Wilson Electronics’ non down-converted bi-directional amplifiers are the most technologically advanced cellular amplifiers on the market today. Their most important feature is patented oscillation shutdown protection, which activates complete shutdown within just a few milliseconds to prevent harmful interference to cell sites. Wilson amplifiers also offer completely adjustable software-controlled automatic gain control, both on forward and reverse links, which allows the amplifiers to meet CDMA and GSM ACPR requirements. The amplifiers are invisible within CDMA and GSM systems. They also have the capability of following base station power requests which allows maintaining the full power dynamic range of the cell phone.
Amplifer Specifications
- Frequency 1850-1910 MHz, 1930-1990 MHz
- Gain 65 dB
- Max Output Power 2 watts
- Max RF + 30 dBm / + 30 dBm
- Noise Figure 4 dB typical
- Flatness ± 4 dB
- Isolation > 90 dB
- Power Requirements Input: 100-240 V AC 50/60 Hz 0.6 A / Output: 6 V DC 3 A
- Connectors N-Female 50 ohms
- Dimensions 5.6 x 3.6 x 1.7 (inch) / 14.2 x 9.1 x 4.4 (cm)
- Weight 1.5 lbs / 0.7 kg
Additional Information
| SKU | AP841365 |
|---|---|
| Brand | Wilson Electronics |
| Model | 841365 |
| Connector Type | N Female |
| Frequency Range | 1900MHz |
| Gain | 65db |
| Antenna Category | Amplifier Kits |
| Accessory Type | Signal Improvement |
| GTIN | 813986008614 |
Check items to add to the cart or select all
You have no items to compare.
