Wilson SmartTech 1900MHz 65db In-Building Amplifier

1900MHz / 65db PCS Wilson Smart Technology™ Bi-Directional Amplifier

Wilson's In-Building Amplifiers offer exceptional performance without causing harmful interference to the cell site. Improve cellular reception inside a building. Great for homes, offices, hangers, warehouses, etc. Wilson Electronics’ non down-converted bi-directional amplifiers are the most technologically advanced cellular amplifiers on the market today. Their most important feature is patented oscillation shutdown protection, which activates complete shutdown within just a few milliseconds to prevent harmful interference to cell sites. Wilson amplifiers also offer completely adjustable software-controlled automatic gain control, both on forward and reverse links, which allows the amplifiers to meet CDMA and GSM ACPR requirements. The amplifiers are invisible within CDMA and GSM systems. They also have the capability of following base station power requests which allows maintaining the full power dynamic range of the cell phone. Comes with

• Bi-Directional Amplifier / Repeater
• AC/DC wall transformer

Also See:

• Estimating Improved Coverage Area
• Brochure
• Installation Guide

-

Antenna Separation Requirements (Important)

The Wilson wireless building amplifier requires at least two antennas (not included). One antenna for outside and one for inside. The outside antenna must be at least 68 feet apart (60 feet if roof is constructed of metal or heavy concrete) away from the inside antenna. The distance must be actual distance between the inside and outside antennas not just cable length. Do not turn on your amplifier unless you have at least the above distances between the inside and outside antenna. These distances must be maintained or the signal will just oscillate between the two antennas and no improvement will be noticed. Also, not enough separation can damage the amplifier.

Wilson PCS In Building Smart Tech Amplifier / Repeater

• Allows multiple phones and cellular data cards to be used simultaneously
• Works on all generations of CDMA, GSM, TDMA,and 3G
• Automatic gain control up to 65 dB.
• Multiple gain steps 30-65 dB.
• Power control logic ensures maximum output power is within cellular standards.
• Gain indicator lights.
• Oscillation protection circuit adjusts amplifier gain to prevent oscillation.
• Overload detection light indicates automatic amplifier shutdown due to signal overload.
• Significantly improves voice and data signal equability.
• Requires no physical connection to cell phone
• Greatly reduces disconnects and drop outs.
• Provides high signal-to-noise ratio.
• Receives and transmits better than a cell phone.
• Works great in homes, offices, buildings and warehouses.
• Extends cell phone battery life.
• Easy to install and use.
• FCC and IC type accepted.

Specifications

• Frequency 1850-1910 MHz uplink / 1930-1990 MHz downlink
• Gain 65 dB max
• Max Output Power: Up to 3 watts
• Max RF + 25 dBm uplink / +25 dBm downlink
• Noise Figure 4 dB nominal
• Flatness ± 4 dB
• Isolation > 90 dB
• Power Requirements 120 V AC / 3 A max
• Connectors N-Female
• Dimensions 4.5 x 3.5 x 1.25(inches) 11.43 x 8.9 x 3.2 (cm)
• Weight 1.5 lbs or 0.7 kg