Wilson DirectConnect Cellular Amplifier 800/1900MHz DC Power

Wilson DirectConnect Cell Phone Amplifiers - CDMA/TDMA

Increase Your Cell Phone and PC Card Coverage The Wilson DirectConnect 3 Watt Power Booster can increase your cellular phone or broadband Data Card coverage up to 50 miles with up to 3 watts of output power. Your phone will use less battery power with the improved signal giving you longer talk and standby times. It will greatly reduce disconnects, drop outs and noise as well as eliminating all microwave energy radiating into your head.

Cellular Broadband PC Cards Too!

An improved cellular signal means faster speeds on your broadband PC Card.

The Wilson Direct Connect comes with:

• DirectConnect Power Booster
• 6ft Phone Adapter Extension Cable
• Cigarette Lighter Power Cord
• External antenna phone/Data Card adapter and Wilson external antennas sold separately.

Important

Requires: External antenna and cell phone or cellular data card adapter (sold separately).

How it Works

The Direct Connect amplifies both send and receive signal. Advanced electronics enable you to receive and transmit better than your cell phone or many Data Cards. Wilson's custom circuitry, provides the lowest signal to noise ratio of any direct connect amplifier available. The Direct Connect connects directly to your cell phone or PC Card with a Wilson Antenna and Phone Antenna Adapter (sold separately). Use the Direct Connect in your car, boat, home or office (Car adapter is included. A/C adapter sold separately).

Wilson Direct Connect Features:

• Increase Coverage up to 50 Miles
• Faster Broadband Service with Improved Cell Signal
• Mobile, Marine and In-Building Use
• Reduces Disconnects, Drop Outs and Noise
• Eliminates Microwave Energy Radiating Into the Head
• Extends Battery Life
• For Cell Phones and Broadband Data Cards
• FCC Type Accepted

Amplifier Specifications

• Frequency 824-894 MHz / 1850-1990 MHz
• Gain 10 dB / 14 dB
• Max Output Power 3 watts
• Max RF +35 dBm / +15 dBm
• Noise Figure 3.5 dB nominal
• Flatness ± 2 dB / ± 2 dB
• Isolation > 90 dB
• Power Requirements 12 V, 0.5-1.5 A max
• Connectors FME-Male 50 ohms
• Dimensions 5.5 x 4.3 x 1.4 (inches) or 14.0 x 10.8 x 3.5 (cm)
• Weight 1.32 lbs or 0.6 kg