Product Description
Wilson SmartTechnology Building Bi-Directional Cellular Repeater System
Wilson Electronics’ non down-converted bi-directional amplifiers are the most technologically advanced cellular amplifiers on the market today. Their most important feature is patented oscillation shutdown protection, which activates complete shutdown within just a few milliseconds to prevent harmful interference to cell sites. Wilson amplifiers also offer completely adjustable software-controlled automatic gain control, both on forward and reverse links, which allows the amplifiers to meet CDMA and GSM ACPR requirements. The amplifiers are invisible within CDMA and GSM systems. They also have the capability of following base station power requests which allows maintaining the full power dynamic range of the cell phone.
Also See:
Antenna Separation Requirements (Important)
Use the following guidelines when planning your setup:
- 800MHz - 50db Amps - at least 50 feet apart (40 feet if roof is constructed of metal or heavy concrete)
- 800MHz - 60db/65db Amps - at least 75 feet apart (50 feet if roof is constructed of metal or heavy concrete)
- 1900MHz - 65db Amps - at least 68 feet apart (60 feet if roof is constructed of metal or heavy concrete)
About Building Cellular Repeater Systems
An in building cellular repeater system has 3 major components. An outside antenna, amplifier and an inside antenna. The signal is received by the outside antenna from the cell site. It is then amplified and repeated to your cell phone through the inside antenna. When the phone transmits, the signal is received by the inside antenna, amplified, then repeated to the cell site via the outside antenna.
How to approximate inside cellular coverage area.
Additional Information
| SKU | AP801CBK |
|---|---|
| Brand | Wilson Electronics |
| Connector Type | No |
| Frequency Range | No |
| Gain | No |
| Antenna Category | Amplifier Kits |
| Accessory Type | Signal Improvement |
| GTIN | No |
You have no items to compare.
