Product Description
Wilson AWS 70 Cellular Repeater System
Wilson Electronics AWS 70 is one of the most technologically advanced cellular amplifiers on the market today. It's most important feature is patented oscillation shutdown protection, which activates complete shutdown within just a few milliseconds to prevent harmful interference to cell sites. Wilson Electronics AWS 70 signal boosters also offer completely adjustable software-controlled automatic gain control, both on forward and reverse links, which allows the amplifiers to meet AWS 1700MHz & 2100MHz requirements. The amplifiers can follow base station power requests which allows maintaining the full power dynamic range of the cell phone.
IMPORTANT NOTE: The Wilson AWS 70 signal booster is made for the newer AWS 1.7GHz and 2.1GHz frequencies used by T-Mobile in some areas. In other areas T-Mobile will use 1900MHz which this booster will not help. We have other booster systems for 800MHz & 1900Mhz frequencies. If you need help, call or use our contact form.
Outside Signal Strength Requirements
The Wilson AWS 70 signal booster has been very effective in areas with a weak signal inside a building and a strong signal outside the building where the outside antenna is mounted. A fairly good signal is required outside the building to get optimum coverage area. If you need with the installation and coverage area calculation, contact us, describe the problem you're having along with location, provide the outside 1700-2100MHz 4G signal strength where the outside antenna is to be mounted, terrain, distance from tower, etc and we can help design your system and evaluate it's effectiveness. Also See: Estimating Coverage Area.
Supported Devices
The Wilson AWS 70 signal booster supports all devices - including smart phones, data cards, tablets, mobile Wi-Fi hotspots - and technologies operating on AWS 1700/2100 frequencies.
Adjustable Gain
The Wilson AWS 70 delivers gain that can be adjusted. The adjustable range is up to 70db frequencies. The gain can be adjusted in 5db increments. Adjustable gain amplifiers make installation easier with more flexibility. If there either frequency range is stronger than then other causing oscillation, you can adjust the gain without having to purchase a different amplifier.
Delivering gain up to 70 dB, the ‘AWS 70’ is the most powerful consumer AWS booster available, with an indoor coverage area more than double the size of that of any competing booster. This makes it ideal for multi-story buildings. This device supports multiple simultaneous connections. Wilson signal boosters feature cell site protection technologies developed over more than a decade of research and development. These protections, many of which are not provided by competing boosters, give peace of mind to installers and customers who don’t have to worry about this booster causing cell site interference.
Features
- Most powerful and affordable AWS booster on the market
- Provides a strong, reliable signal even in weak signal areas
- Separate adjustable gain controls for uplink (device-to-tower) & downlink (tower-to-device)
- Configurable with a variety of Wilson antennas to fit virtually any building installation
- Supports all devices - including smart phones, data cards, tablets, mobile Wi-Fi hotspots - and technologies operating on AWS 1700/2100 frequencies
- FCC type accepted, Industry Canada certificated
Surge Protector
Optional Wilson Lightning Surge Protector AM859902 recommended (not included).
Also See:
Antenna Separation Requirements (Important)
The Wilson AWS 70 system requires at least 50 ft of separation between the inside and outside antennas.
Choosing an Outside Building Antenna
An Omni-Directional antenna (Building Mount, Trucker) works best to capture signal from multiple providers in different directions.
Use a Directional Antenna (Panel or Wide Band) when you have a weak outside signal and your are trying to capture a signal from a particular tower or set of towers in one direction.
Antenna Options
Wilson Panel Antenna
The Wilson Panel antenna is typically used as an indoor antenna and is wall mounted but can be ceiling mounted on higher ceilings (10ft or higher). They work well across longer, more narrow areas. Since they typically reach further, they are the prefered inside antenna. The Panel antenna radiates 70 degrees for a more focused beam to reach longer distances.
1710-1880MHz ... Gain: 10.0dbi
2100-2700MHz ... Gain: 8 dbi
More Panel Antenna Information
Wilson Dome Antenna
The Wilson Dome Antenna is typically ceiling mounted. The Dome antenna radiates 360 degrees from ceiling down for a wider reach. They are the preferred antenna for lower ceilings to cover a wider antenna than a Panel antenna. The Vertical Polorized Dome antenna radiates from the ceiling downward. Use to get the farthest reach downward. The Dual Polorized Dome antenna radiates downward and slightly upwards. Use to radiates above a ceiling.
1710-1880 MHz ... Gain: 3.5 dBi
2110-2170 MHz ... Gain: 1.5 dBi
More Dome Antenna Information.
Wilson Wide Band Directional Antenna
Wilson Wide Band Directional Antenna covers 700-2500MHz frequencies. It is directional and performs best when pointed toward your cellular providers tower. If you are trying to boost the signal from one service provider tower, this is the preferred antenna. If you trying to cover multiple service providers and their towers are in different locations, consider the Building Mount Omni Directional Antenna.
Frequency 1710-1880 MHz - Gain: 9.2 dBi
Frequency 2110-2170 MHz - Gain: 10.4 dBi
More Wilson Wide Band Antenna Information
Cable Options
Wilson 400 cable is recommended for repeater type system as it is a very low loss cable. RG-58 cable will work fine for shorter runs (less than 30 feet recommended).
Connectors: Match connectors with antenna selected. Most building antennas come with N Female connectors. Wilson 400 cable comes with N Male connectors. The Wilson SOHO amplifier comes with FME Male connectors but also comes with adapter to convert the FME Male to N Female.
AWS 70 SPECIFICATIONS:
Product Number: 802365
Frequency: 1710-1755 MHz / 2110-2155 MHz
Gain: 70 dB
Max Uplink Power: 750 mw
Max Downlink Power: 25 dBm
Noise Figure: 3.5 dB nominal
Flatness: ±5 dB
Power Requirements: 110-240 V AC, 50-60 Hz, 10 W
Connectors: N-Female
Dimensions: 5.7 x 4.2 x 1.5 inch (14.0 x 10.8 x 3.9 cm)
Weight: 1.27 lbs (0.544 kg)
Additional Information
| SKU | AK802365 |
|---|---|
| Brand | Wilson Electronics |
| Model | N/A |
| Connector Type | N Female |
| Frequency Range | 1700MHz & 2100MHz |
| Gain | 70db |
| Antenna Category | Amplifier Kits |
| Accessory Type | Signal Improvement |
| GTIN | No |
| Compatible Devices |
|
Check items to add to the cart or select all
You have no items to compare.
