Wilson AG Pro 75 InBuilding Signal Booster

Wilson AG Pro 75 cellular signal booster for in building use. It is Dual-band (800MHz and 1900MHz), installer-friendly booster design provides a strong cellular signal inside a building.  Wilson AG Pro 75 amplifier delivers a maximum gain of 75dB at 1900 MHz and 70dB at 800 MHz. The product includes Wilson’s patented oscillation and cell site overload protection, and proximity detection technologies to prevent interference on the cellular network. It works with all cellular devices on all North American service provider networks (except Nextel/iDEN - Nextel iDEN Systems).

The AG Pro 75 has adjustable gain control for optimal gain at almost any location. It is a Bidirectional amplifier that boosts cellular signal to and from the cell site. The amplifier is configurable with a variety of Wilson cellular antennas to fit virtually any building installation.

• 800MHz Adjustable from 40db to 70db in 5db increments
• 1900MHz Adjustable from 45db to 75db in 5 db increments

The Wilson AG Pro comes with:

• AG Pro 75 Amplifier
• AC Power Supply
• Installation Guide

Requires: At least one inside and one outside antenna and cable. Lightning surge protector highly recommended.

AG Pro 75 Booster Benefits

• Boosts both incoming and outgoing cellular signals
• Significantly extends connection range for cell phone and cellular data cards
• Greatly reduces dropped calls
• Strong, reliable signal even in weak signal areas
• Faster data transfers (2G & 3G networks)
• Compatible with all North American cellular networks (except Nextel/iDEN)

The right setup depends on many factors. We can help you estimate improved cellular coverage area using our different cell phone repeaters inside a building with a few key pieces of information.  Read our Estimating Coverage Area page, gather information then give us a call or use our online contact form.

Product Specifications

• Model Number: 801280
• Antenna Connectors: N female connectors
• Antenna Impedance: 50 ohms
• Dimensions: 5.7 x 4.2 x 1.5 inch (14.0 x 10.8 x 3.9 cm)
• Weight: 0.48 lbs (0.22 kg)
• Frequency 824-894 MHz / 1850-1990 MHz
• Passband Gain (nominal): 70 dB at 800 MHz & 75 dB at 1900 MHz
• Power output (uplink)
•    - Power output for single cell phone (uplink): 30.8 dBm / 30.5 dBm
•    - Power output for single received channel (downlink): 26.0 dBm / 25.2 dBm
• Noise Figure (typical): 3.5 dB nominal Isolation >90 dB
• Power Requirements (using supplied adapter): 110-240 V AC, 50-60 Hz, 8 W