Product Description
This Wilson amplifier features the benefit of an external antenna and 3 watt amplifier without a physical connection to your phone. It even allows multiple phones to be used simultaneously. The signal is received by the outside antenna from the cell site. It is then amplified and repeated to your cell phone from the inside antenna.
Comes With:
- Wilson Mobile Wireless 3 Watt Amplifier
- Low Profile Antenna - Inside Vehicle
- 6 Volt DC Cigarette Lighter Power Supply
* Requires Outside antenna.
Outside Antenna Requirements
The Wilson Mobile Wireless amplifier comes with a Low Profile antenna for use as an inside antenna but requires an External Antenna. For external antenna use a magnetic mount, pole mount or hole mount antenna.The Wilson Trucker Antenna, Wilson Dual Band magnetic mount are recommended for outside use. More About Wilson Antennas. Do not use a Glass Mount antenna as the metal of the vehicle helps block the signal between the inside and outside antenna reducing the chance of oscillation.
Portable System - Cars, Trucks, RVs, Home, Office
- Takes outside signal, amplifies it and rebroadcasts inside
- Reduce Dropped Calls
- Increase Service Area
- Works with Cell Phones and Cellular Data Cards
- Works with most US & Canada providers (AT&T, Alltel, Sprint, T-Mobile, Verizon, etc.)
- Amplifiers 800MHz and 1900MHz Frequencies
Home or Office Too!
Add an optional 6 volt AC power supply and use this cell phone signal booster at your desk in your home or office. Just place the outside antenna outside a window and get at least 6 ft of separation between the 2 antennas. Need to cover more area in side your home or office?
TECH TIP: Coverage area from the inside antenna is limited by signal strength received by the outside antenna. If your cellular signal is very weak (2 bars or less) outside your vehicle or building, place your cell phone or mobile broadband pc card directly on the inside antenna for the most power. We would recommend using your Bluetooth headset for freedom of movement in these situations.
Wilson Mobile Wireless DualBand Cellular Amplifier
- Requires No Physical Connection to Your Cell Phone
- Passes TIA/EIA-98 Transmit Tests for Evaluating CDMA Cellular Phones
- Power Control Logic Ensures Maximum Output Power is within Cellular Standards
- Allows Multiple Phones to be Used Simultaneously
- Maximum 3 Watts Output Power (cell site controlled)
- Designed for All Cellular Systems Including AMPS, CDMA, EDGE, GPRS, GSM, TDMA and 1x Technologies
- LED- Power & Overload Shutdown/Oscillation
- Overload Protection Circuit - Protects Cell System from Overload
- Automatic Reset - If overload occurs
- FCC Type Accepted
Required Antenna Separation
Separation of inside and outside antennas is very important. The metal roof of the vehicle acts as a barrier and helps shield the two antennas from each other, preventing oscillation. If the vehicle has a sunroof, it is important to separate the inside and outside antennas by at least five feet. This prevents the amplifier from overloading or oscillating.
Wilson Mobile Wireless Specifications
- Frequency 824-894 MHz / 1850-1990 MHz
- Gain 40db / 45db
- Max RF Up/Down +35 dBm / +10 dBm
- Noise Figure Typical 3 dB nominal Isolation
- Uplink/Downlink more than 90 dB
- Power Requirements 12 V, .5-1.5 (subject to Uplink power)
- Connectors FME-Male 50 Ohms
- Dimensions 4.5 x 3.5 x 1.25 (inch) or 11.43 x 8.9 x 3.2 (cm)
- Weight 1.5 lbs or 0.7 kg
You may also be interested in the following product(s)
Wilson Mobile Wireless DualBand 3 Watt Amp Ant/Cradle Kit
$329.95
|
Wilson Mobile Wireless DualBand 3 Watt Amp Antenna Kit
$309.95
|
Additional Information
| SKU | AP801201 |
|---|---|
| Brand | Wilson Electronics |
| Model | 801201 |
| Connector Type | FME Male |
| Frequency Range | 824-894 MHz / 1850-1990 MHz |
| Gain | 40db / 45db |
| Antenna Category | Amplifiers |
| Accessory Type | Signal Improvement |
| GTIN | 813986004654 |
Check items to add to the cart or select all
You have no items to compare.
