AlternativeWireless Antenna Adapters
Netgear 340U/341U Single Antenna Adapter FME M
- SKU:
- AA1095NG34
- MPN:
- AA1148SNGL
- Condition:
- New
- Availability:
- No Longer Available
- Short Description:
- • Includes 1 Antenna Adapters
• For Netgear 340U & 341U Modems
Description
1 External Antenna Adapter. Enables you to attach 1 antenna to a Netgear AT&T 340U or Sprint 341U USB Modem. (Antennas Not Included).
The Netgear 340U & 341U are MIMO devices that have 2 antenna ports. A MIMO Device uses 2 antennas to send and receive a signal at usually higher speeds where MIMO is available. MIMO technology is controlled by your service provider and may not be available in your area. If not available, 1 antenna will work fine. To achieve true MIMO purchase two adapter cables and 2 antennas. To achieve the best performance make sure the antennas are 18" apart or greater.
Includes: 1 Cable. One end connects to your 340U and the other end terminates in FME Male for attaching to an external antenna.
Cable Length: 20 inches.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
WARNING - To purchase this product, you must read this warning and agree to purchase and use this product at your own risk. Although it's rare, using this external antenna adapter can damage your device and void it's warranty. When an external antenna adapter is inserted into the port on your mobile device, your device's antenna is disconnected so that your device can receive signal through an external antenna. When you remove the adapter, your device's antenna should reconnect. If it does not, your device will show a weak or no signal and no service. This means that the switch that connects and reconnects the adapter is damaged or stuck. Despite the adapter manufacturer's testing, some devices may have weak ports and be damaged using this product. Damage may also be caused by pushing adapters in too far, twisting the connector when inserting or removing and by pulling on the adapter cable. As an alternative, we recommend a powered signal booster that does not require a connection through your devices RF port. These signal boosters will perform better than just an antenna directly connected to your device without the risk of plugging in an antenna adapter.