Antennas | Amplifiers/Repeaters | DirectConnect Power Boosters
Extension Cables | Phone Adapters | Connectors & Tools | About Wilson
Wilson
SignalBoost Mini-Amp DualBand
(824-894 MHz and 1850-1990 MHz range cellular networks)
Wilson Dual Band In Vehicle Cellular Amplifier / Repeater For Cars, Trucks and RV's
Boost the cellular signal inside your vehicle with the Wilson SignalBoost Mini-Amp cellular power booster. Improve cellular reception for both cellular phones and data cards. The Wilson SignalBoost Mini-Amp operates with no direct connection to your phone or broadband PC Card and supports multiple users in your vehicle. It amplifies signals from most cellular service providers using 800MHz and 1900MHz frequencies. The units microprocessor-controlled circuitry ensures reliable operation within regulatory standards.
The Wilson SignalBoost Mini-Amp install in minutes with no special tools required The Mini-Amp is small and portable so you can easily move it from vehicle to vehicle.
How It Works
The Wilson SignalBoost Mini-Mobile Amp is comprised of two internal amplifiers that amplify a cell device's signal, to and from cell towers, unlike some amplifiers in the the market. Signals from a tower are picked up by the roof mounted antenna and sent to the first amplifier's receiver, which then boosts and re broadcasts the stronger signal inside the vehicle through the inside antenna. The sensitivity of the Wilson's design makes it capable of receiving signals that are weaker than most cell phones can receive., thereby significantly improving performance of cell phones (or data cards) inside a vehicle. The signal from the cell device is amplified by a second internal amplifier, which sends the signal back the cell tower with up to 6 times more power than a typical cell phone. The Wilson SignalBoost Mini- Amp extends overall signal range, allowing you to communicate with fewer dropped calls and from places you never could before!
Wilson Mobile Wireless Amp Features
- Installs in minutes – no special tools required
- Portable – can easily be moved between vehicles
- Wireless operation - no physical connection to cell phone or data card
- Supports multiple users in vehicle
- Amplifies signals to and from the cell site on both 800MHz and 1900MHz frequencies
- Microprocessor-controlled circuitry ensures reliable operation within regulatory standards
- Build-in antenna in the phone cradle permits hands-free operation
- Improves signals for both voice and data
- Six times more power than a typical cell phone
- DC power supply included (cigarette lighter type), AC power supply sold separately
- FCC and Industry Canada (IC) Type Accepted
Wilson DualBand Repeater Specifications
- Frequency 824-894 MHz / 1850-1990 MHz
- Gain 40 dB / 45 dB
- Max Output Power 1.5 watts
- Max RF 31.7 dBm
- Noise Figure 3.5 dB nominal
- Flatness ± 3.5 dB / ± 4 dB
- Isolation > 90 dB
- Power Requirements 6V, 0.6A - 2A (subject to uplink power)
- Connectors SMA Female
- Dimensions 3.25 x 3.25 x 1 (inches) or 9.6 x 8.1 x 3.8 (cm)
- Weight 4 oz or 0.11 kg
Please read the following information before ordering. It will greatly aid you in the purchase and installation of your Wilson Amplifier.
Installation
Instructions
Complete instructions
for installing the Wilson Amplifier / Repeater
BUY NOW!
Wilson SignalBoost Mini-Amp
$269.95
Comes with SignalBoost Mini-Amp, Ultra Slim Inside Antenna and Cigarette Lighter Power Cord. Requires outside (non glass mount)
antenna with SMA Female connector (not included). works with all U.S. Cellular and PCS carriers (except Nextel iDen). Item: AM801230
IMPORTANT: For external antenna use a magnetic mount, pole mount or hole mount antenna (see kits below). Do not use a glass mount antenna.
Don't forget to order an outside antenna required with this amplifier but not included... Or see Kits Below.
Wilson SignalBoost Mini-Amp
*** With Outside Antenna ***
$289.95
The Wilson SignalBoost Mini-Amp with Outside Antenna Kit contains two of Wilson’s most popular products: The SignalBoost Mini-Amp (AM801230), 12-inch Magnet-Mount Antenna (AE301125) for outside, Ultra Slim antenna for inside, and cigarette lighter power supply for a complete, easy-to-install system. The kit works with all U.S. Cellular and PCS carriers (except Nextel iDen), supports multiple cell phones and laptop data cards simultaneously. AM801232
Wilson SignalBoost Mini-Amp
*** With Outside Antenna & Phone Cradle / Holder ***
$309.95
The Wilson SignalBoost Mini-Amp Kit with Cradle offers the same benefits as the kit noted above, but includes Wilson’s Cell Phone Cradle Plus instead of the low profile antenna. The Wilson Cell Phone Cradle Plus is a versatile car cradle with a built-in antenna. Using the cradle not only extends cellular range and provides better coverage, but it allows drivers to keep both hands on the wheel when using their cell phones, greatly increasing safety. This kit supports simultaneous use of multiple cellular devices. AM801231
Accessories
Wilson Cell Phone Cradle Plus w/ Built-In Antenna
Use the Wilson Cell Phone Cradle Plus instead of the Inside Antenna that comes with the Wilson Vehicle Bi-Directional Amplifier. Wilson's Cell Phone Cradle Plus adds the benefit of a built-in cell phone signal antenna/coupler.
Wilson 6VDC Vehicle Hardwire Kit
$24.95
Wilson 6 volt vehicle hardwire kit. Enables you connect the Wilson DirectConnect
directly into your vehicle's wiring instead of using the cigarette
lighter power cord.. Not for use on older 12 volt amplifiers.
AM859923
Wilson 6VDC AC Power Supply
$24.95
Wilson 6 volt AC (wall outlet) power supply for use with newer "Smart Technology" building and vehicle amplifier / repeaters. Not for use on older 12 volt amplifiers.
AM859912
Wilson 6VDC DC Power Cord
$24.95
Wilson 6 volt DC (vehicle cigarette lighter outlet) power cord for use with newer "Smart Technology" building and dual band vehicle amplifier / repeaters. (Same power supply that is included with the Smart Technology In-Vehicle Dual Band Amplifier/Repeaters), Not for use on older 12 volt amplifiers.
AM859913
Power Booster Black Mesh Carrying Case - Large
Easily transport your power booster, cable and connectors and more. Holds amplifier, cables and power cord (sold separately). Features padded soft sides, vented to facilitate airflow to amplifier, velcro closures, elastic hold down straps for components, zippered pockets for cables and accessories. Holds 2 batteries (sold separately). Size: 10.5 x 9.5 x 2.5 inches / 26.67 x 24.13 x 6.35 centimeters. Larger Picture / Setup Diagram (Flash Required)
Wilson Portable Amplifier Vented Soft Carrying Case - Large
$29.95
Part #AM859924
