FW U600/Huawei/LG AD600 4G Port 6 Inch Antenna Adapter CRC9 FME M

6 inch Sprint Franklin Wireless U600 antenna adapter that fits U600 4G port. Attach an external antenna directly to your Sprint mobile wireless device. FME Male connector. AA1025 CRC9

Sprint external antenna adapter for Franklin Wireless 4G port. Attach an external antenna directly to your Sprint U600 modem made by Franklin Wireless. Attaches to an external antenna with an FME Female connector. 

Connects to 3G antenna port on the Franklin Wireless Sprint U600 cellular modem

Length: 6 inches

Note that the Franklin Wireless U600 modem has one 2G/3G port and a seperate 4G port. The 2G/3G port requires a different adapter (Part # AA1091) not included.

WARNING - To purchase this product, you must read this warning and agree to purchase and use this product at your own risk. Although it's rare, using this external antenna adapter can damage your device and void it's warranty. When an external antenna adapter is inserted into the port on your mobile device, your device's antenna is disconnected so that your device can receive signal through an external antenna. When you remove the adapter, your device's antenna should reconnect. If it does not, your device will show a weak or no signal and no service. This means that the switch that connects and reconnects the adapter is damaged or stuck. Despite the adapter manufacturer's testing, some devices may have weak ports and be damaged using this product. Damage may also be caused by pushing adapters in too far, twisting the connector when inserting or removing and by pulling on the adapter cable. As an alternative, we recommend a powered signal booster that does not require a connection through your devices RF port. These signal boosters will perform better than just an antenna directly connected to your device without the risk of plugging in an antenna adapter.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov