EnGenius EOC2611P Long Range Outdoor Wireless G AP *DISC

Wireless Coverage for Larger Areas

Links:

• Product Description
• Specifications
• Data Sheet
• Users Maunal
• Quick Installation Guide
• Installation Video
• Download EnGenius Locator - A program designed by EnGenius. It is used to find the IP address of the EnGenus devices on your network. Useful if you set the AP to obtain an IP automatically from a DHCP server. 

PRODUCT VIDEO FOR 2611P & 5611P

Many Access Points claim to be long-range units because they send large amounts of power out. That's not enough.

Do they have the receive sensitivity to back it up? EnGenius does. With 600mW of power and extremely high receive sensitivity (-92dBm@6mbps!), this EnGenius access point will not only send a signal to you wherever you are, but it will also have the ability to receive the faint signal of a far-away computer that doesn't put out as much power.

For even greater range, this EnGenius unit is built with an integrated 10dBi, dual polarized antenna. It provides a great combination of range and beam width that is perfect for covering large areas indoors or out!

Worried about interference?

The EnGenius EOC2611P supports distance control by 1km to 30km and RSSI indicator, which enable the best transmit and receive signals for wireless communication.

Concerned About Intruders?

The EnGenius EOC2611P can encrypt all wireless data by 64/128/152-bit WEP encryption or WPA2/WPA. MAC address filter allows user to select exactly which stations should have the access to your wireless network. In addition, user isolation function can protect the private network between client users.

This unit is powered by the included 24V PoE (Power over Ethernet) injector. Just plug it in near your network hub and run only one Ethernet cable to the access point for both power and data! Outdoor deployment becomes fast and easy.

With a compact design, top-notch performance and wide range of features, the EOC2611P is an ideal wireless solution for any residence or office.

KEY FEATURES:

INTEGRATED DUAL POLARITY ANTENNA DESIGN
Selectable vertical or horizontal antenna polarization
Operates in horizontal polarity to avoid interference from standard vertical-polarized Wi-Fi devices
Allows service provider to utilize multi-polarization for best performance

WATERPROOF CABLE ACCESSORY KIT
Prevents rain and dew get into the device through cables and connector holes
Ensures higher waterproof quality against water and moisture

HIGH 600mW WIRELESS POWER
Ensures robust signal to overcome long distances
Offers superior WiFi coverage over leading brands

DUAL ANTENNA DESIGN
Embedded 10dBi DUAL POLARITY panel antenna with external connector for upgradeable antenna
Perfect for both Point-to-Point and Point-to-Multi Point applications

SIGNAL STRENGTH LED INDICATOR
Allows network installer for easy deployment

MULTIPLE WIRELESS NAMES
Broadcasts multiple SSID's in one device
Permits different levels of network access (VLAN Tagging)

EASY INSTALLATION

Connect via Ethernet Cable to current Router or PC Ethernet Port

POWER-OVER-ETHERNET (24V POE) CAPABLE
Power and data over one single cable for convenient installation
Less heat dissipation to ensure reliable performance
Capable of 300 feet PoE cable length
Power Injector Included

Specifications:

HARDWARE SPECIFICATIONS:
MCU/RF: Atheros AR2316
Memory: 32MB SDRAM
Flash: 8MB
Physical Interface
   One 10/100 Fast Ethernet RJ-45
   One Reset Button
   One Antenna Switch  
   One RP-SMA Connector
LED Indicators:
   1x Power (Status)
   1x LAN (10/100Mbps)
   1x WLAN (Wireless Activity)
   3x Link Quality (Client Bridge mode)
      Green: Excellent Quality / Yellow: Good Quality / Red: Poor Quality
Power Requirements:
   Active Ethernet: (Power-over-Ethernet) Proprietary PoE Design
   Power Adapter: 24V/0.6A DC
Regulation Certifications: FCC Part 15C/15B, EN 300 328/EN 301 489-1/-17, EN60950

RF SPECIFICATIONS:
Frequency Band: 2.412~2.472GHz
Modulation Technology: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DSSS: DBPSK, DQPSK, CCK
Operating Channels: 11 for North America / 14 for Japan / 13 for Europe
Receive Sensitivity (Typical):
IEEE 802.11g
   -92dBm @ 6Mbps
   -74dBm @ 54Mbps
IEEE 802.11b
   -97dBm @ 1Mbps
   -89dBm @ 11Mbps
Available Transmit Power (Average):
IEEE 802.11g
   28dBm @ 6~24Mbps
   26dBm @ 36Mbps
   24dBm @ 48Mbps
   23dBm @ 54Mbps
IEEE 802.11b
   28dBm @ 1~11Mbps
Antenna:
   Internal: Directional Panel Antenna; Peak Gain 10dBi
      Horizontal -3dB Bandwidth: 70°
      Vertical -3dB Bandwidth: 35°
      Antenna Polarity: Dual-Polarized; Vertical/Horizontal
      Polarity Selection: Software Controlled
   External: RP-SMA Female Type

SOFTWARE FEATURES:
Topology: Infrastructure
Protocol / Standard: 802.3 (Ethernet) / 802.3u (Fast Ethernet) / 802.11b/g (2.4GHz WLAN)
Operation Mode: Access Point / Client Bridge / Client Router / WDS
LAN: DHCP Server / DHCP Client
VPN: VPN - pass through
Wireless:
   Channel Selection (Setting varies by countries)
   Transmission Rate 802.11b/g: 108(SuperG), 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
   Long Distance Transmission: 1km to 30km
   Transmit Power Table
   Signal Strength LED Indicators (3 colors)
   Narrow Bandwidth Support 5/10/20MHz
   PING Function and Trace Route Function
   PPPoE (Client Router mode)
   Multiple SSID Support (up to 4)(Access Point mode)
   802.1q VLAN Tagging Support
Security:
   WEP Encryption 64/128/152bits
   WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
   WPA/WPA2 Enterprise (WPA-EAP using TKIP)
   802.1x Authenticator
   Hide SSID in Beacons
   MAC Address Filtering (up to 50)
   Wireless STA (Client) Connected List
QoS: WMM

MANAGAMENT:
Configuration: Web-Based Configuration (HTTP)
Firmware Upgrade: Upgrade Firmware via Web Browser / Keep Latest Setting When Firmware Update
Administrator Setting: Administrator Password Change
Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds)
System Monitoring: Status, Event Log
SNMP: V1, V2c
MIB: MIB I, MIB II (RFC1213) and Private MIB
Backup & Restore: Settings Through Web
Time Setting: NTP (Auto Setting) / Manual Change

ENVIRONMENT & PHYSICAL:
Temperature Range: Operation -20°C to 70°C (-4°F to 158°F) / Storage -30°C to 80°C (-22°F to 176°F)
Humidity (Non-condensing): 0%~90% Typical
Dimensions: Length: 10.24” (260mm) x Width: 3.31” (84mm) x Height: 2.17” (55mm)
Weight: 0.84lb. (380g)

INSTALLATION VIDEO

EnGenius EOC2611P access point. High powered, long range wireless networking access point which allows seamless wireless networking over a much longer range than typical routers. Powered by 24V PoE (Power over Ethernet) injector (included). Just plug it in near your network hub and run only one ethernet cable to the access point for both power and data. Outdoor deployment becomes fast and easy.. Frequency Band: 2.412~2.472GHz