Wilson SIGNALBOOST™
Universal
Mobile and Home/Office Cellular
PC Card or Cell Phone Amplifier (811210)
Connect to either a Cell Phone
OR a Cellular Broadband Card
Increase Your Cellular Signal 10 to 15 Times with Wilson Signal Booster
The Wilson SIGNALBOOST™ Cellular/PCS signal amplifier improves wireless mobile signals on both Cellular (824-894 MHz excluding iDen frequencies) and PCS (1850-1990 MHz) bands.
The Wilson SignalBoost™ works with Verizon, US Cellular, Cellular One, Alltel, Bell Canada, Telus, Cingular, Sprint, T-Mobile and all other Cellular and PCS carriers.
(Note: This unit will not work with Nextel iDen Frequencies. See Nextel Mobile Wireless Amplifier)
No Device Specific External Antenna Adapter Required
A Wilson Signal Booster DirectConnect power booster provides the ultimate in cell phone signal improvement however, the DirectConnect requires an external antenna adapter specific to your cellular phone's make and model. If no external antenna adapter is available for your device, the Wilson SignalBoost is the next best thing. It connects to your wireless phone or Data Card using the supplied Wilson Ultra-Slim Antenna (pictured). No other phone adapter is required. The connector is attached to your device using Velcro®.
SignalBoost Universal Cell Phone Amplifier Kits
KIT 1
Wilson SignalBoost Cellular Signal Amplifier
*** No Outside Antenna ***
$169.95
Comes with
- Wilson® SIGNALBOOST™ Cellular Signal Amplifier
- Cigarette Lighter DC Power Supply
- Wilson Ultra Slim antenna with Velcro® (Attaches to your phone or PC Card) apprx: 3 in. x 1.5 in.
- User Guide
Requires external antenna with FME Female connector (not included in this kit). Optional AC wall outlet power supply available below. ACCESSORIES..Item: AP811210
WARNING: Connect the SignalBoost to your cell phone or PC Card using the included universal adapter ONLY. Using any other connector will likely damage your device.
Don't forget to order an outside antenna (see kit below) required with this amplifier but not included.
KIT 2
Wilson SignalBoost with Mini DualBand Outside Antenna
*** With Mini-DualBand Outside Antenna ***
$179.95
Comes with
- Wilson® SIGNALBOOST™ Cellular Signal Amplifier
- Wilson Mini DualBand Antenna
- Cigarette Lighter DC Power Supply
- Wilson Ultra Slim antenna with Velcro® (Attaches to your phone or PC Card) apprx: 3 in. x 1.5 in.
- User Guide
Optional AC wall outlet power supply available below. ACCESSORIES.Item: AP811211
KIT 3
Wilson SignalBoost with Outside Antenna & Wilson 3db Outside Antenna
*** With 3db Gain Outside Antenna ***
$189.95
SignalBoost Mobile Cellular Signal Amplifier Kit with12" tall Wilson 3db DualBand Magnetic Mount Antenna (301103).
This SignalBoost Kit comes
- Wilson SignalBoost Amplifier
- 12" Wilson Antenna (301103) for outside antenna
- Wilson Ultra Slim antenna with Velcro® (Attaches to your phone or PC Card) apprx: 3 in. x 1.5 in.
- Cigarette lighter power cord
- User Guide
Optional AC wall outlet power supply available below. ACCESSORIES. Item: AP811210-3DB
KIT 4
Wilson SignalBoost with Outside Antenna & Phone Cradle
*** With Outside Antenna and Phone Cradle ***
$199.95
SignalBoost Mobile Cellular Signal Amplifier Kit with Cradle. The SignalBoost cradle kit accommodates a single user and requires that the cell phone remain in the cradle. The Wilson phone cradle features a built-in antenna and accommodates any size cell phone and features multiple mounting options for the dashboard console of any vehicle.
This SignalBoost Kit comes with
- Wilson SignalBoost
- 12" Wilson Antenna (301103) for outside antenna
- Wilson Phone Cradle with built in antenna
- Cigarette lighter power cord
- User Guide
Optional Goose Neck Mount and AC wall outlet power supply available below. ACCESSORIES. Item: AP811214
Outside the US?
Wilson SignalBoost GSM 900/1800MHz and 900/2100MHz Europe/Asia Version
Improve Wireless Broadband PC Card / Data Card Reception 
Wireless 3G broadband service (EV-DO, EDGE/GPRS, HSDPA/ UMTS, etc.) from providers like Cingular, Sprint and Verizon is becoming more and more popular. Wireless broadband services like these that use the same frequencies as your cell phone can also benefit from the Wilson SignalBoost™.
How the Wilson SignalBoost Works
The Wilson SignalBoost™ Cell Phone Signal Amplifier has been carefully engineered to significantly improve the performance of your cell phone or cellular data card in both vehicle and home/office applications. Together with an antenna (sold separately), the amplifier's state-of-the-art technology is designed to increase your signal up to 15 times, reduce disconnects and dropouts, and increase data communication rates needed for 3G technologies. The universal connector fits all cellular and PCS phones and data cards.
The external cell phone antenna will collect the cell tower signal and send it through the cable to the amplifier.
The signal is then boosted and sent through the extension cable to the universal connector
on your cell phone or data card, which then communicates with the improved signal. When
the cell phone or data card transmits, the signal goes through the universal connector
and the extension cable, is boosted by the cell phone amplifier and broadcast back to the cell tower
through the antenna.
Wilson Electronics manufactures a wide variety of antennas and accessories to help you customize your SignalBoost™ Amplifier for your specific application.
NOTE: Use of this amplifier with an antenna gain higher than 6.12 dBi is in violation of FCC regulations for which the offender is fully liable. All Wilson mobile antennas are 6.12 dBi or less.
SignalBoost Install Instructions
Wilson Signal Booster Features
- Works on all generations of CDMA, TDMA and GSM (Note: This unit will not work with Nextel iDen Frequencies)
- Up to 3 watts maximum power
- Power control logic ensures maximum output power is within cellular standards
- FCC and IC type accepted
- US and foreign Patents Pending
Wilson SignalBoost Benefits
- Works with all Cellular/PCS cell phones and laptop data cards (except iDEN, Nextel)
- Connects to ALL phones and data cards with a Universal Connector using a Velcro® patch.
- No plug-in external antenna adapter is needed
- Has up to 10 times more power than your cell phone or laptop data card
- Significantly improves voice and data signal quality
- Increases data communication rates needed for 3G technologies
- Receives and transmits better than your cell phone
- Extends cell phone battery life
- Works great in mobile, in-building, and marine applications
- Easy to install and use, and it's inexpensive
Wilson SignalBoost Specifications
- Part Number: AM811210
- Frequency: 824-894 MHz / 1850-1990 MHz
- Gain: cell site controlled
- Max Output Power: 3 watts (cell site controlled)
- Max RF:
- +35 dBm / +33 dBm Noise Figure
- 3.5 dB nominal Flatness
- ± 2 dB / ± 2 dB
- Isolation: ›50 dB uplink/downlink
- Power Requirements: 12 V DC, 2 A
- Connectors: FME-Male 50 ohms
- Dimensions: 5 x 3.5 x 1.2 (inches) 12.7 x 8.9 x 3 (cm)
- Weight: 1.03 lbs / 0.468 kg
Gooseneck Windshield Mount
$15.95
This optional gooseneck suction cup bracket for mounting the Wilson Cradle to the windshield. 901120
Wilson Cell Phone Cradle Plus w/ Built-In Antenna
Use the Wilson Cell Phone Cradle Plus instead of the Universal Adapter that comes with the SignalBoost. Wilson's Cell Phone Cradle Plus adds the benefit of a built-in cell phone signal antenna/coupler.
Wilson Cell Antenna Window Mount 
$8.95
Wilson Window mount for Wilson Magnetic Mount and Mini Dual Band magnetic mount antennas. Uses 2 suction cups to attach to window. Black. Larger Window Mount Picture. (Antenna Not Included.) AM901128
12v A/C Power Supply For SignalBoost & DirectConnect
$19.95
Enables you to plug your Wilson SignalBoost & DirectConnect Power Booster into any US wall outlet in your home or office.
Wilson 12v Hardwire Power Supply Kit For SignalBoost & DirectConnect
$10.95
Enables you connect the Wilson SignalBoost & DirectConnect
directly into your vehicle's wiring instead of using the cigarette
lighter power cord.
Wilson 12v Car Cigarette Lighter Power Supply For SignalBoost & DirectConnect
$8.95
Enables you power the Wilson SignalBoost & DirectConnect
from your car's cigarette lighter outlet. Keep a spare on hand.
(This item is included with the Wilson SignalBoost and Wilson
DirectConnect as well as older Wilson
Vehicle Amplifier/Repeaters.).
Wilson Universal Patch Antenna Adapter for Wilson SignalBoost Amplifier
$14.95
Smaller sized universal patch antenna connector for Wilson SignalBoost Amplifier. Connects from your phone's housing to the Wilson SignalBoost Amplifier. 7.5 foot cable with FME Female connector. Includes Velcro® for attaching to phone or PC Card..
Wilson Ultra Slim Antenna for SignalBoost Amplifier
$19.95
Wilson Ultra Slim universal patch antenna connector that comes packaged with the Wilson SignalBoost Amp. Carry a spare. Connects from your phone's housing to the Wilson SignalBoost . 7.5 foot cable with FME Female connector. Includes Velcro® for attaching to phone or PC Card. Approx Dim: 3 in. x 1.5 in.
Power Booster Black Mesh Carrying Case - Large
Easily transport your power booster, cable and connectors and more. Holds amplifier, cables and power cord (sold separately). Features padded soft sides, vented to facilitate airflow to amplifier, velcro closures, elastic hold down straps for components, zippered pockets for cables and accessories. Holds 2 batteries (sold separately). Size: 10.5 x 9.5 x 2.5 inches / 26.67 x 24.13 x 6.35 centimeters. Larger Picture / Setup Diagram (Flash Required)
Wilson Portable Amplifier Vented Soft Carrying Case - Large
$29.95
Part #AM859924
Power Booster Black Mesh Carrying Case - Small
Small and compact to easily transport your power booster, cable and connectors. Holds amplifier, cables and power cord (sold separately). Features include carry strap, soft sides, vented to facilitate airflow to amplifier, Velcro® closures, zippered pockets for cables and accessories. Size: 215 x 178 x 51 millimeters (8.5 x 7 x 2 inches).
Wilson Portable Amplifier Vented Soft Carrying Case - Small
$19.95
Part #AM859909.
Power Booster Hard Carrying Case
Easily transport your power booster, cable and connectors. Features: constructed of new HPX™ resin making it shock/impact resistant, water proof tongue-and-groove locking lid, airtight, constructed of nearly indestructible resin, custom foam insert. Vortex™ auto pressure release valve adjusts to changes in air pressure. Comfortable strong, soft grip handles, Press and pull latches are easy on knuckles and won't pop open if dropped. Holds amplifier and accessories. 411 x 323 x 168 millimeters (16 x 12.6 x 6.6 inches). 2.2 kilograms (4.9 lbs) empty. Amplifiers and antennas sold separately. Note: Case must remain open during use of power booster.
Wilson Portable Amplifier Hard Carrying Case
$149.95
Part #AM859916. Larger Picture
Portable Amplifier Kit w/Hard Carrying Case
No power source in remote location? This kit includes the hard carry case, 3 batteries and accessories that enable you to use your Wilson Direct Connect Amplifier when no other power source is available. Batteries last approximately 6 hours of talk time and 12 hours of standby time with a full charge. Amplifier and Antenna sold separately. Note: Case must remain open during use of power booster. Larger Picture / Setup Layout
Wilson Portable Amplifier Kit w/Hard Carrying Case
$549.95
Includes Hard Case (859916), AC Charger (859914), DC Charger (859918), Input Cable (859929), On/Off Switch (859915), 3 Rechargeable Batteries (859908). Part #AM859917. Larger Picture