Antennas | Amplifiers/Repeaters | DirectConnect Power Boosters
Extension Cables | Phone Adapters | Connectors & Tools | About Wilson
Wilson SIGNALBOOST™
GSM 900/1800 Europe / Asia / Middle East Cellular
Phone/ PC Card Signal Amplifier (811710)
Improve Cell Phone Reception
Increase Your Cellular Signal 10 to 15 Times with Wilson SignalBoost™
The Wilson SIGNALBOOST™ GSM signal amplifier improves wireless mobile signals on both GSM (890-960 MHz and (1710-1880 MHz) bands found in Europe, Asia, Middle East and other parts of the world..
(Note: This unit will not work with 800/1900 MHz or Nextel iDen Frequencies found in the U.S. or Canada. See Nextel Mobile Wireless Amplifier or The US version of the Wilson SignalBoost)
No Device Specific External Antenna Adapter Required
A Wilson DirectConnect power booster is a wireless extender that provides the ultimate in cell phone signal improvement however, the DirectConnect requires an external antenna adapter specific to your cellular phone's make and model. If no external antenna adapter is available for your device, the Wilson SignalBoost is the next best thing. It connects to your wireless phone or Data Card using the supplied universal connector. No other phone adapter is required. The connector is attached to your device using a velcro patch.
Improve Wireless Broadband PC Card / Data Card Reception 
Wireless 3G broadband service is becomming more and more popular. Wireless broadband services like these that use the same frequencies as your cell phone can also benefit from the Wilson SignalBoost™.
How the Wilson SignalBoost Works
The Wilson SignalBoost™ Cellular Signal Amplier has been carefully engineered to signicantly improve the performance of your cell phone or cellular data card in both vehicle and home/ofce applications. Together with an antenna (sold separately), the amplier’s state-of-the-art technology is designed to increase your signal up to 15 times, reduce disconnects and dropouts, and increase data communication rates needed for 3G technologies. The universal connector ts all cellular and PCS phones and data cards.
The external cell phone antenna will collect the cell tower signal and send it through the cable to the amplier.
The signal is then boosted and sent through the extension cable to the universal connector
on your cell phone or data card, which then communicates with the improved signal. When
the cell phone or data card transmits, the signal goes through the universal connector
and the extension cable, is boosted by the amplier and broadcast back to the cell tower
through the antenna.
(Note: This unit will not work with 800/1900 MHz or Nextel iDen Frequencies found in the U.S. or Canada. See Nextel Mobile Wireless Amplifier or The US eersion of the Wilson SignalBoost)
Wilson Electronics manufactures a wide variety of antennas and accessories to help you customize your SignalBoost™ Amplier for your specic application.
SignalBoost Install Instructions
Wilson SignalBoost™ Features
- Works on GSM 900/1800 frequencies
- Connects to ALL phones and data cards with a Universal Connector using a Velcro® patch.
- No plug-in external antenna adapter is needed
- Has up to 10 times more power than your cell phone or laptop data card
- Significantly improves voice and data signal quality
- Increases data communication rates needed for 3G technologies
- Receives and transmits better than your cell phone
- Extends cell phone battery life
- Works great in mobile, in-building, and marine applications
- Easy to install and use, and it's inexpensive
- US and foreign Patents Pending
BUY NOW!
Wilson SignalBoost 900/1800 GSM Signal Amplifier
$249.95
Comes with Wilson® SIGNALBOOST™ GSM (890-960 MHz and (1710-1880 MHz) bands found in Europe, Asia and other parts of the world.. Amplifier, Cigarette Lighter DC Power Supply, Universal Connector with Velcro® patch. Requires external antenna with FME Female connector (not included). Optional AC wall outlet powersupply available below. ACCESSORIES..Item: AM811710 (Note: This unit will not work with 800/1900 MHz or Nextel iDen Frequencies found in the U.S. or Canada. See Nextel Mobile Wireless Amplifier or The US eersion of the Wilson SignalBoost)
WARNING: Connect the SignalBoost to your cell phone or PC Card using the included universal adapter ONLY. Using any other connector will likely damage your device.
Don't forget to order an outside antenna (see kit below) required with this amplifier but not included.
Wilson SignalBoost 900/1800 GSM Amplifier with Outside Antenna
$274.95
Comes with Wilson® SIGNALBOOST™ GSM 900/1800 Signal Amplifier, Wilson 900/1800MHz Antenna (301703), Cigarette Lighter DC Power Supply, Universal Connector with Velcro® patch. Optional AC wall outlet power supply available below. ACCESSORIES. (Note: This unit will NOT work with 800/1900 MHz or Nextel iDen Frequencies found in the U.S. or Canada. See Nextel Mobile Wireless Amplifier or The US eersion of the Wilson SignalBoost) Item: ABK811710
WARNING: Connect the SignalBoost to your cell phone or PC Card using the included universal adapter ONLY. Using any other connector will likely damage your device.
Wilson SignalBoost 900/1800 GSM Amplifier with Outside Antenna & Phone Cradle
$299.95
SignalBoost Mobile Cellular Signal Amplifier Kit with Cradle. The SignalBoost cradle kit accommodates a single user and requires that the cell phone remain in the cradle. The Wilson phone cradle features a built-in antenna and accommodates any size cell phone and features multiple mounting options for the dashboor console of any vehicle.
This SignalBoost Kit comes with a Wilson SignalBoost, 12" Wilson Tri-Band Antenna (304202), Universal Phone Cable, Wilson Phone Cradle, cigarette lighter power cord and instructions. Optional AC wall outlet power supply available below. ACCESSORIES. Item: ABK811714 (Note: This unit will not work with 800/1900 MHz or Nextel iDen Frequencies found in the U.S. or Canada. See Nextel Mobile Wireless Amplifier or The US eersion of the Wilson SignalBoost)
Note: We do not ship outside the US, Canada or Puerto Rico except to military APO/FPO addresses.
WARNING: Connect the SignalBoost to your cell phone or PC Card using the included universal adapter ONLY. Using any other connector will likely damage your device.
Wilson SignalBoost Specifications
- Part Number: AM811710
- Frequency: 890-960 MHz / 1710-1880 MHz
- Gain (up/down): 25 db / 25db
- Max RF:
- +35 dBm / +32 dBm Noise Figure
- 3.5 dB nominal Flatness
- ± 2 dB / ± 2 dB
- Isolation: ›50 dB uplink/downlink
- Power Requirements: 12 V DC, 2 A
- Connectors: FME-Male 50 ohms
- Dimensions: 5 x 3.5 x 1.2 (inches) 12.7 x 8.9 x 3 (cm)
- Weight: 1.03 lbs / 0.468 kg
Wilson SignalBoost Box Contents
Wilson Cell Phone Cradle Plus w/ Built-In Antenna
Use the Wilson Cell Phone Cradle Plus instead of the Universal Adapter that comes with the SignalBoost. Wilson's Cell Phone Cradle Plus adds the benefit of a built-in cell phone signal antenna/coupler.
Wilson Cell Antenna Window Mount 
$8.95
Wilson Window mount for Wilson Magnetic Mount and Mini Dual Bandmagnetic mount antennas. Uses 2 suction cups to attach to window. Black. Larger Window Mount Picture. (Antenna Not Included.) AM901118
12v A/C Power Supply For SignalBoost & DirectConnect
$19.95
Enables you to plug your Wilson SignalBoost & DirectConnect Power Booster into any 110v US wall outlet in your home or office. Transformer/Converter may be requried when used outside the US.
This item is currently Out Of Stock at Wilson. We expect more in about the middle of January 2008. An alternative would be an AC/DC Power Converter to 12v with a 1.5A output minimum such as the one below.
Wilson 12v Hardwire Power Supply Kit For SignalBoost & DirectConnect
$10.95
Enables you connect the Wilson SignalBoost & DirectConnect
directly into your vehicle's wiring instead of using the cigarette
lighter power cord.
Wilson 12v Car Cigarette Lighter Power Supply For SignalBoost & DirectConnect
$8.95
Enables you power the Wilson SignalBoost & DirectConnect
from your car's cigarette lighter outlet. Keep a spare on hand.
(This item is included with the Wilson SignalBoost and Wilson
DirectConnect as well as older Wilson
Vehicle Amplifier/Repeaters.).
Universal Antenna Adpater for SignalBoost
$14.95
Replacement universal antenna connector for Wilson SignalBoost. Connects from your phone's housing to the Wilson SignalBoost cable. 7.5 foot cable with FME Female connector.
Power Booster Black Mesh Carrying Case - Large
Easily transport your power booster, cable and connectors and more. Holds amplifier, cables and power cord (sold separately). Features padded soft sides, vented to facilitate airflow to amplifier, velcro closures, elastic hold down straps for components, zippered pockets for cables and accessories. Holds 2 batteries (sold separately). Size: 10.5 x 9.5 x 2.5 inches / 26.67 x 24.13 x 6.35 centimeters. Larger Picture / Setup Diagram (Flash Required)
Wilson Portable Amplifier Vented Soft Carrying Case - Large
$29.95
Part #AM859924
Power Booster Black Mesh Carrying Case - Small
Small and compact to easily transport your power booster, cable and connectors. Holds amplifier, cables and power cord (sold separately). Features include carry strap, soft sides, vented to facilitate airflow to amplifier, Velcro® closures, zippered pockets for cables and accessories. Size: 215 x 178 x 51 millimeters (8.5 x 7 x 2 inches).
Wilson Portable Amplifier Vented Soft Carrying Case - Small
$19.95
Part #AM859909.
Power Booster Hard Carrying Case
Easily transport your power booster, cable and connectors. Features: constructed of new HPX™ resin making it shock/impact resistant, water proof tongue-and-groove locking lid, airtight, constructed of nearly indestructible resin, custom foam insert. Vortex™ auto pressure release valve adjusts to changes in air pressure. Comfortable strong, soft grip handles, Press and pull latches are easy on knuckles and won't pop open if dropped. Holds amplifier and accessories. 411 x 323 x 168 millimeters (16 x 12.6 x 6.6 inches). 2.2 kilograms (4.9 lbs) empty. Amplifiers and antennas sold separately. Note: Case must remain open during use of powerbooster.
Wilson Portable Amplifier Hard Carrying Case
$149.95
Part #AM859916. Larger Picture
Portable Amplifier Kit w/Hard Carrying Case
No power source in remote location? This kit includes the hard carry case, 3 batteries and accessories that enable you to use your Wilson Direct Connect Amplifier when no other power source is available. Batteries last approximately 6 hours of talk time and 12 hours of standby time with a full charge. Amplifier and Antenna sold separately. Note: Case must remain open during use of powerbooster. Larger Picture / Setup Layout
Wilson Portable Amplifier Kit w/Hard Carrying Case
$549.95
Includes Hard Case (859916), AC Charger (859914), DC Charger (859918), Input Cable (859929), On/Off Switch (859915), 3 Rechargeable Batteries (859908). Part #AM859917. Larger Picture
