shop cell phone accessories antennas power boosters cases chargers holders headsets hands free mobile accessoriescell phone accessories call 888-399-4932 or 210-493-0023. Hours Mon - Fri 8am to 4pm CSTsecure checkout

Wilson Amplifiers: Cellular Repeater, Mobile Repeater, Cell Antenna Booster

Wilson Mobile Wireless DualBand Cellular Amplifier

wireless extender cellular power booster repeater Cars, Trucks and RV's

  • Takes outside signal, amplifies it and rebroadcasts inside
  • Reduce Dropped Calls
  • Increase Service Area
  • Works with Cell Phones and Cellular Data Cards
  • Works with most US & Canada providers (AT&T, Alltel, Sprint, T-Mobile, Verizon, etc.)

This Wilson amplifier features the benefit of an external antenna and 3 watt amplifier without a physical connection to your phone. It even allows multiple phones to be used simultaneously.

The signal is received by the outside antenna from the cell site. It is then amplified and repeated to your cell phone from the inside antenna.


Kits & Pricing


KIT 1:

Wilson Mobile Wireless DualBand Cellular Amplifier
*** Outside Antenna Sold Separately ***

$299.95

wilson in car wireless cellular repeater extender

Comes with

  • Wilson Mobile Wireless DualBand Cellular Amplifier
  • Low Profile Inside Antenna
  • Cigarette Lighter Power Cord

Requires outside (non glass mount) antenna with FME Female connector (not included). works with all U.S. Cellular and PCS carriers (except Nextel iDen). Item: AP801201

IMPORTANT: For external antenna use a magnetic mount, pole mount or hole mount antenna (see kits below). Do not use a glass mount antenna.

Add Item View Basket


KIT 2:

Wilson Mobile Wireless DualBand Cellular Amplifier Kit
*** With Outside Antenna ***

$309.95

wilson dual band amplifier repeater extender

This mobile repeater kit contains two of Wilson’s most popular products:

For a complete, easy-to-install cellular repeater system. The kit works with all U.S. Cellular and PCS carriers (except Nextel iDen), supports multiple cell phones and laptop data cards simultaneously. AP801212

Add Item View Basket


KIT 3:

Wilson Mobile Wireless DualBand Cellular Amplifier Kit with Cradle
*** With Outside Antenna & Phone Cradle / Holder ***

$329.95

wilson wireless mobile cellular signal amplifier with phone cradle

The cellular repeater kit offers the same benefits as the kit noted above, but includes the Wilson Cell Phone Cradle Plus instead of the low profile antenna.

The Wilson Cell Phone Cradle Plus is a versatile car cradle with a built-in antenna. Using the cradle not only extends cellular range and provides better coverage, but it allows drivers to keep both hands on the wheel when using their cell phones, greatly increasing safety. This kit supports simultaneous use of multiple cellular devices. AP801213

Optional Goose Neck Mount and AC wall outlet power supply available below.

Add Item View Basket

Home or Office Too!

Add an optional 6 volt AC power supply (below) and use this Wilson Amplifier at your desk in your home or office. Just place the outside antenna outside a window and get at least 6 ft of separation between the 2 antennas. Need to cover more area in side your home or office? See Wilson's Building Cell Phone Repeaters & Amplifiers.

TECH TIP: Coverage area from the inside antenna is limited by signal strength received by the outside antenna. If your cellular signal is very weak (2 bars or less) outside your vehicle or building, place your cell phone or pc card directly on the inside antenna for the most power. We would recommend using your Bluetooth headset for freedom of movement in these situations.

Wilson Mobile Wireless DualBand Cellular Amplifier

  • Requires No Physical Connection to Your Cell Phone
  • Passes TIA/EIA-98 Transmit Tests for Evaluating CDMA Cellular Phones
  • Power Control Logic Ensures Maximum Output Power is within Cellular Standards
  • Allows Multiple Phones to be Used Simultaneously
  • Maximum 3 Watts Output Power (cell site controlled)
  • Designed for All Cellular Systems Including AMPS, CDMA, EDGE, GPRS, GSM, TDMA and 1x Technologies
  • LED- Power & Overload Shutdown/Oscillation
  • Overload Protection Circuit - Protects Cell System from Overload
  • Automatic Reset - If overload occurs
  • FCC Type Accepted

Out Performs Other Units

Tests show Wilson Cellular's Dual Band Wireless Mobile Amplifier outperforms Digital Antenna® and RF Engineered Solutions® (RES).
More Test Information (Document Opens pdf File in Another Browser Window)

Additional Antenna Requirements (Important)

in vehicle cellular repeater antennaThe Wilson In Vehicle Amplifier comes with a Wilson Low Profile Antenna for inside your vehicle. Another antenna for outside the vehicle is required.

Required Antenna Separation

Separation of inside and outside antennas is very important. The metal roof of the vehicle acts as a barrier and helps shield the two antennas from each other, preventing oscillation.

If the vehicle has a sunroof, it is important to separate the inside and outside antennas by at least five feet. This prevents the amplifier from overloading or oscillating.

IMPORTANT: For external antenna use a magnetic mount, pole mount or hole mount antenna. Do not use a glass mount antenna. The Wilson Trucker Antenna, Wilson Dual Band magnetic mount are recommended for outside use. More About Wilson Antennas.

Wilson Mobile Repeater Specifications

  • Frequency 824-894 MHz / 1850-1990 MHz
  • Gain 40db / 45db
  • Max RF Up/Down +35 dBm / +10 dBm
  • Noise Figure Typical 3 dB nominal Isolation
  • Uplink/Downlink more than 90 dB Power Requirements 12 V, .5-1.5 (subject to Uplink power)
  • Connectors FME-Male 50 Ohms
  • Dimensions 4.5 x 3.5 x 1.25 (inch) or 11.43 x 8.9 x 3.2 (cm)
  • Weight 1.5 lbs or 0.7 kg

Installation Instructions
Complete instructions for installing the Wilson Mobile Wireless DualBand Cellular Amplifier.

Read brochure
Page 1 | Page 2

Optional Accessories

wilson cradle gooseneck standGooseneck Windshield Mount

$15.95

This optional gooseneck suction cup bracket for mounting the Wilson Cradle to the windshield. 901120

Add Item View Basket

Wilson 6VDC AC Power Supply

$24.95
wilson 6 volt power supplyWilson 6 volt AC (wall outlet) power supply for use with newer "Smart Technology" building and vehicle amplifier / repeaters. Not for use on older 12 volt amplifiers.

AM859912
Add Item View Basket

wilson cell phone holder plusWilson Cell Phone Cradle Plus w/ Built-In Antenna

Use the Wilson Cell Phone Cradle Plus instead of the Inside Antenna that comes with the Wilson Vehicle Bi-Directional Amplifier. Wilson's Cell Phone Cradle Plus adds the benefit of a built-in cell phone signal antenna/coupler.

More Wilson Cell Phone Cradle Plus Info

Wilson Directional Desktop Antenna

wilson desktop antenna$24.95

Direct the inside cellular signal with the Wilson Desktop directional antenna. Replaces the inside low profile cellular that comes with Wilson vehicle cellular amplifiers. Enables you to focus amplified signal in one direction. Compatible with Wilson 3 Watt Vehicle Wireless Cellular Amplifiers and Wilson SignalBoost DT Desktop.

Antenna Gain: 4.5 dBi ( 806-894 MHz) / 4.9 dBi (896-939 MHz) / 4.0 dBi (1800-1990 MHz) / 2 dBi (1710-1800MHz)
Radiation: Directional 0 100 deg Horizontal Beam Width
Impedance: 50 ohms

Comes with 5 feet of cable with FME Female connector. Include screw on TNC Male adapter to attach to SignalBoost Desktop amplifier (after removing Omni Directional Antenna). Installation Guide | Setup Illustration | Larger Picture

Warning: The Desktop Antenna must have a separation of at least 24 inches from all persons during normal operations.

Add Item View Basket

Wilson 6VDC Vehicle Hardwire Kit

$24.95
wilson hard wire power kitWilson 6 volt vehicle hardwire kit. Enables you connect the Wilson Smart Technology. 6 volt amplifier directly into your vehicle's wiring instead of using the cigarette lighter power cord.. Not for use on older 12 volt amplifiers.

AM859923
Add Item View Basket

Wilson 6VDC DC Power Cord

$24.95
wilson 6volt power cordWilson 6 volt DC (vehicle cigarette lighter outlet) power cord for use with newer "Smart Technology" building and dual band vehicle amplifier / repeaters. (Same power supply that is included with the Smart Technology In-Vehicle Dual Band Amplifier/Repeaters), Not for use on older 12 volt amplifiers.

AM859913
Add Item View Basket

Wilson Slim Low Profile Antenna w/Velcro

$19.95
wilson slim low profile cellular antennaReplacement Low profile inside antenna that comes with the Wilson Wireless Amp lifer. For use with Wilson Mobile Wireless Amplifiers. Dual Band (800/1900MHz). 10ft cable with FME F connector.

301127
Add Item View Basket

Power Booster Black Mesh Carrying Case - Large

wilson ac power supplyEasily transport your power booster, cable and connectors and more. Holds amplifier, cables and power cord (sold separately). Features padded soft sides, vented to facilitate airflow to amplifier, velcro closures, elastic hold down straps for components, zippered pockets for cables and accessories. Holds 2 batteries (sold separately). Size: 10.5 x 9.5 x 2.5 inches / 26.67 x 24.13 x 6.35 centimeters. Larger Picture / Setup Diagram (Flash Required)

Wilson Portable Amplifier Vented Soft Carrying Case - Large
$29.95
Part #AM859924
Add Item View Basket

 

© 2009 AlternativeWireless.com, Inc All Rights Reserved.
AlternativeWireless.com® Reg. U.S. Pat. & Tm. Off.

Terms of Use | Contact Us | About Us | Site Index | Hands-Free Headsets
Other Sites | Wilson Antenna Index | SiteMap.xml