Wilson Trucker Cell Phone Antenna
The Engineers who created the Wilson Trucker C.B. Antenna have designed a cellular antenna that connects directly to your cellphone with an external antenna adapter. No other manufacturers cellular antenna comes close to the performance of the Wilson Trucker Cellular Antenna, both on 800 and 1900 MHz (Digital or Analog).
Up to 90% of cell phone signal on both transmit and receive is absorbed within the vehicle body and the user's head. Wilson solves this problem by channeling all the power from the cellphone to the outside antenna. This results in the Wilson Cellular Trucker Antenna transmitting and receiving over 10 times more signal (10-15 db Gain) than a cellphone used inside the vehicle without an outside antenna.
Dual Band 800 & 1900 MHz Analog & Digital
The Wilson Dual Band Cellular Trucker Antenna was carefully designed to minimize loss and maximize gain on both 800 MHz and 1900 MHz bands. Wilson accomplished this by using a phasing coil and a low loss coaxial phase reversing device that provides high gain on both frequencies. Wilson's innovative design results in high efficiency and low losses and will get the most signal to your cellular phone. Thanks to those innovations and attention to detail, Wilson Electronics has the best performing dual band trucker cell phone antenna available. Specs
Trucker Mirror / Pole Mount Antenna
Wilson's most popular model. Mounts on a standard 3/8"-24 thread female mount and includes 12 feet of RG-58 low loss coax cable with FME Female Nipple connector. Total length is 32 inches. Works in homes and on trucks, buses, boats, etc.
It's innovative design allows the Trucker Mirror Mount to be mounted on any surface - Metal, Fiberglass, Wood, etc. This means it will have excellent performance on the new fiberglass body trucks as well as the standard metal body trucks.
The antenna is also designed with an elevated feed system so that the antenna can get as high as possible to maximize signal strength. Installation Instructions (Requires Flash Player)
Wilson Trucker Antenna
$44.95
Trucker with 3/8 x 24 threaded post.
Does not include mount (see Trucker Mounts below). An External Antenna Adapter is requied to connect directly to your phone.
Trucker Antenna with 3 Way Mount Kit
$49.95
Same Wilson Trucker Cellular Antenna as above plus 1 Wilson 3 Way Mount..
An External Antenna Adapter is requied to connect directly to your phone.
Trucker 3/8 x 24 Thread Mounts
Trucker Antenna 3
Way Mount (3/8 x 24 thread)
$7.95
3/8"-24 male thread mount. 5 millimeter chrome-plated aluminum. Fits round poles up to 1 inch
in size. 901104 Larger
Picture.
Trucker Horizontal Mount with Spade Stud
$6.95
Compatible with Wilson Cellular Trucker Antennas, 3/8-24 thread, 5 millimeter chrome-plated aluminum. Hardware included 901106 Larger
Picture.
Trucker Antenna Mirror
Mount
$11.95
3/8"-24 male thread mount. 5 millimeter chrome-plated aluminum, Used for mounting on Mac or Freightliner
truck mirrors. 901108 Larger
Picture.
Trucker Antenna Chrome
Spring
$5.95
The Chrome Trucker Antenna Spring provides a spring base for Trucker
Antenna. The Spring attaches between antenna and mount. It give
the antenna more bend to help prevent breakage. Larger
Picture.
Trucker Antenna Replacement Radials
Replacement radials for Wilson Trucker Antennas.
NOTE: Older Trucker Antennas have 3 long radials. Newer Trucker Antennas have 6 radials, 3 long and 3 short.
Set of 3 Short Replacement Radials
$3.95
3 short radials are on newer 6 radial Trucker Antennas
Set of 3 Long Replacement Radials
$3.95
3 Long radials are on older 3 radial Trucker Antennas and newer 6 radial Trucker Antennas
Set of 6 Radials
$6.95
3 long radials and 3 short radials for newer 6 radial Trucker Antennas
Wilson Trucker Spring-Mount Cellular Antenna
The Wilson Trucker Mobile Phone Antenna with spring base. Works great on trucks, RV’s, cars, boats, homes, or almost any other application. The built-in ground plane allows for use on any surface - metal, fiberglass, 
wood, etc. Fits standard 3/8 inch x 24 threaded mount.
The Wilson Cellular Trucker Antenna features a spring base and includes 13.5 feet of RG-58 low loss coax cable with FME Female Nipple connector. Total length is 21.5 inches. Installation Instructions (Requires Flash Player)
Trucker
Spring-Mount Cellular Antenna
$49.95
Trucker with 3/8 x 24 threaded post.
Important: Does not include mount (see Trucker 3 Way Mount above), An External Antenna Adapter is requied to connect directly to your phone.
RV / Trucker Roof Mount Antenna
The included mounting hardware is designed to span roofs with large gaps such as the attics found in most Recreational Vehicles (RV's).
For installation through roofs without an attic, we provide instructions on cutting the 5/8" by 7" threaded rod. The threaded rod is brass and cuts easily.
Antenna extends 17.5 inches above the roof line. And features a spring to reduce impact damage.
Because of it's innovative design the Recreational Vehicle Trucker can be mounted on any surface - Metal, Fiberglass, Wood, Etc.
You can expect excellent performance on RV's, Trucks, Cars, Boats, Homes or almost any other application.
Includes 13.5 feet of RG-58 low loss coax cable and FME Female connector. Antenna whip now has spring base to absorb some impact without breaking. An External Antenna Adapter is requied to connect directly to your phone.
More information on the RV Trucker Antenna
ONLY $49.95
Wilson Trucker NMO Hole Mount
The NMO Hole Mount Trucker works with any standard NMO mount. These mounts are very popular in the commercial sector.
Part Number |
AE301112 | |
Frequency Range |
806-894 MHz / 1850-1990 MHz | |
Impedance |
50 ohms | |
Antenna Gain |
4.9 dBi 806-894 MHz / 5.9 dBi 1850-1990 MHz | |
Radiation |
Omni | |
Polarization |
Vertical | |
Wavelength |
1.0 Wavelength 806-894 MHz / 2.1 Wavelength 1850-1990 MHz | |
Ground Plane |
Metal ground plane required | |
Connector |
FME Female | |
Material |
Whip - Stainless Steel | |
Height |
13.25 inches / 33.7 cm | |
Mount |
NMO Mount Types(Sold Separately) |
Must be mounted on a metal surface.
The roof mounts must be mounted on the roof or any other flat metal surface and require that a hole be drilled through the vehicle.
The lip mounts must also be on a metal surface but they don't require any drilling - instead, they mount to the edge of the trunk, hood, etc.
Wilson NMO Trucker Antenna
$19.95
NMO Mount Trucker is 13.25" tall.
Important: Does not include mount or cable. See NMO Antenna Mounts below.
NMO Antenna Mounts
NMO 3/8" Hole Mount
$11.95
Installs in 3/8" hole sheetmetal surface. Includes 14 feet of RG-58 low loss
coax cable and FME female connector.
Does not include antenna. Larger
Picture.
NMO 3/4"
Hole Mount
$11.95
Installs in 3/4" hole sheetmetal surface. Includes 14 feet of RG-58 low loss
coax cable and FME female connector.
Does not include antenna. Larger
Picture.
NMO Lip
/ Trunk Mount
$14.95
Clips onto trunk. Includes 14 feet of RG-58 low loss coax cable
and FME female connector. Does not include antenna. Larger
Picture.
Trucker Mirror/Pole Mount Antenna Specifications Electrical Properties:
- Frequency Range: 806-894 MHz, 1850-1990 MHz
- VSWR:
- 1.9:1 Average across 806-894 MHz
- 1.8:1 Average across 1850-1990 MHz
- Impedance: 50 ohms / both bands
- Antenna Gain:
- 5.12 dbi (3 dbd) 806 - 894 MHz
- 6.12 dbi (3 dbd)1850 - 1990 MHz
- Radiation: Omni
- Polarization: Vertical
- Wave:
- 9 wave length 806-894 MHz
- 1.95 wave length 1850-1990 MHz
- Ground Plane: Independent
Ground Plane (except NMO mounts which use the vehicle's
metal as a ground plane)
Mechanical Properties:
- Connecter: FME-Female
- Material: Whip
- Stainless Steel
- Fiberglass - Spiral Wound
- Coax Cable: RG-58 / 12'
- Height: 32"
- Mount: Standard
CB 3/8 X 24 thread. (NMO and RV mounted Truckers also available)
Wilson Vehicle Wireless Amplifier Kit
The
Wilson Dual Band Wireless Mobile Amplifier wireless extender that features the benefit of an external antenna and 3 watt amplifier without a physical connection to your phone. It even allows multiple phones to be used simultaneously.
The signal is received by the outside antenna from the cell site. It is then amplified and repeated to your cell phone from the inside antenna. When the phone transmits, the signal is received by the inside antenna, amplified, then repeated to the cell site via the outside antenna.
Direct
Connect Cellular Power Booster
For better reception for an individual phone, try the Direct Connect Power Booster. It connects directly to your cell phone using an external antenna adapter. This 3 Watt Power Booster can increase your coverage up to 50 miles with up to 3 watts of power. It will greatly reduce disconnects, drop outs and noise as well as eliminating all microwave energy radiating into your head. Your phone will use less battery power with the improved signal giving you longer talk and standby times.
More Wilson Direct Connect Cellular PowerBooster Information
Wilson SignalBoost Cellular Power Booster
The Wilson SIGNALBOOST™ cell phone power booster improves cellular signals on both Cellular (824-894 MHz excluding iDen frequencies) and PCS (1850-1990 MHz) bands. The Wilson SignalBoost™ works with Verizon, US Cellular, Cellular One, Alltel, Bell Canada, Telus, Cingular, Sprint, T-Mobile and all other Cellular and PCS carriers. (Note: This unit will not work with Nextel iDen Frequencies)
No Device Specific External Antenna Adapter Required
Many wireless devices do not have RF ports that would enable you to connect an external antenna or power booster. The Wilson SignalBoost connects to your wireless phone or PC Card using the supplied universal connector. No other phone adapter is required. The connector is attached to your device using a velcro patch.