| 
Wilson Panel Antenna Usage
The Wilson
Panel Dual Band Antenna is a directional antenna and is the perfect solution for those wanting a fixed base installation interior wall mount antenna to use with the Wilson
Amplifier/Repeater. The panel antenna features a built in ground plane.
Features:
- Directional Antenna
- Built-In Ground Plane
- Mounting Hardware Included
- For Fixed Installations
Wilson Dual Band Panel Antenna
For use with Wilson In-Building Repeaters as a wall or window mount, interior antenna.
Specifications
Frequency Range: 800 - 960 MHz / 1710 - 2500MHz
Nominal Impedance: 50 Ohms / Both Bands
Antenna Gain: 7dBi / 10dbi
3db Beamwidth in Hor. Plane: 70/60
3db Beamwidth in Ver. Plane: 50/45
F/B: >=20 db
Polarization: Vertical
VSWR: <= 1.5
Ground Plane: Built in Ground Plane
Dimensions: 8.27 x 7.09 x 1.73in or 21 x 18 x 4.39cm
Weight: 1.32 lbs or .6 kg
Connector: N Female
Wall Mount or Window Mount
Cable
No cable is included with this antenna. Use of Wilson 9913-Equivalent Ultra Low Loss Cable with N Male connector recommended.
Wilson Panel Antenna Wall Mount
$79.95
Mounting hardware (screw placement templete, mounting bracket and scews) included. See mounting instructions. Must be mounted at least 7 feet above floor. Cable not included. Item: AE301135

Wilson Panel Antenna Window Mount
$79.95
Window mount version has 4 suction cups for mounting on glass. Suction cups can be removed. Also includes double sided tape for more permanent installation without suction cups. Must be installed at least 7 feet above floor. Cable not included. Item: AE301134

Wilson Electronics Antenna Cables
Wilson 9913-Equivalent Ultra Low Loss Cable
For Wilson Yagi and Panel Antennas
Wilson's ultra low loss 9913 is the lowest loss cable we carry. They are specifically made for Wilson Yagi and Panel Antennas. It's also athick and heavy cable that is hard to manipulate. If you're looking for the finest, least loss cable for your antenna application, this is it. These cables come with "N" Male connector crimped on each end.
- Wilson 9913-Equivalent, 20ft (0.8 db loss) - $49.95 ADD TO CART
- Wilson 9913-Equivalent, 30ft (1.2 db loss) - $59.95 ADD TO CART
- Wilson 9913-Equivalent, 50ft (2.0 db loss) - $74.95 ADD TO CART
- Wilson 9913-Equivalent, 75ft (3.0 db loss) - $89.95 ADD TO CART
- Wilson 9913-Equivalent, 100ft (4.0 db loss) - $119.95 ADD TO CART
Wilson 2 Way Antenna Splitter - 800MHz
$74.95
The Wilson 800MHz 2 Way Splitter allows you to connect 2 internal antennas to the Wilson Electronics Cellular Bi-Directional Amplifier / Repeater System . Note that the signal will be split in half between the antennas. The ends on the splitter are all "N" type female so antennas require "N" type male connectors or adapters. For use with Wilson 800MHz and Nextel Building Repeaters.
Note: To attach the splitter to the bi-directional amp, you need the 2 foot Wilson 9913 extension cable (AB951113 below). To connect an antenna with an FME Female Nipple connector to the splitter, you need and N Male / FME Male (AC971113) adapter (see below)
Wilson 2 Way Antenna Splitter - 1900MHz
$74.95
The Wilson 1900MHz 2 Way Splitter allows you to connect 2 internal antennas to the Wilson Bi-Directional Cellular Amplifier Repeater System . Note that the signal will be split in half between the antennas. The ends on the splitter are all "N" type female so antennas require "N" type male connectors or adapters. For use with Wilson 1900MHz Building Repeaters.
Note: To attach the splitter to the bi-directional amp, you need the 2 foot Wilson 9913 extension cable (AB951113 below). To connect an antenna with an FME Female Nipple connector to the splitter, you need and N Male / FME Male (AC971113) adapter (see below)
Wilson 9913-Equivalent, 2 feet
$18.95
This two foot 9913-Equivalent cable is for patching in Wilson's Lightning Surge Protector to Wilson's Yagi Antenna or for connecting the Wilson Splitter to and Amplifier/Repeater with N connectors. The cable has "N" Male connectors crimped on each end.
N Male / FME Male Adapter
$8.95
Metal adapter with N type Male on one end and FME Male on the other. Can be used to convert N type Female connectors on Wilson Splitter to FME Male. Don't forget to buy 2, one for each antenna outlet. AC971113
|