Wilson Electronics has been a pioneer in the wireless communications industry for over 30 years. Jim Wilson, the president and founder of Wilson Electronics, and his staff of Electrical Engineers are committed to bringing you cellular phone products with the highest performance possible.
Experience, Quality and Performance
While evaluating many of the cellular accessories currently manufactured around the world we found many good looking cellular accessories that fail to perform, particularly the cellular antennas. Our engineering team tested almost all mobile cellular dual-band (800/1900 MHz) antennas manufactured in Asia and Europe and found them to have poor to fair performance on 800 MHz and most failed to transfer any appreciable signal on 1900 MHz. Even antennas made in the USA by reputable companies are very poor on 1900 MHz as shown by the test reports on the back of our brochures and web site.
Wilson Electronics Company Overview Video
Wilson Electronics' engineers have designed a new series of dual-band cellular antennas that perform on both frequencies with the maximum gain possible. You will see the difference when you connect your cellular to a Wilson Dual-Band Cellular Antenna. Our experience in antenna design and manufacturing along with our dedication to quality control are the reasons we produce the worlds best performing Cellular Antennas.
What to look for in a cellular amplifier.
Wilson Electronics Web Site
Wilson Amplifiers
Wilson cellular phone amplifiers significantly extend signal range and improve voice and data quality for all types of cell phones and cellular data cards in both mobile and in-building cellular repeater applications. Designed by Wilson’s experienced engineers, these amplifiers feature ultra sensitive receivers and superior transmitters that boost cellular signals and improve data communication rates while protecting carrier cell sites from harmful interference. Used in conjunction with the company’s high-performance inside and outside antennas, these amplifiers solve the vast majority of cellular communication problems such as drop-outs, dead zones and disconnects. Wilson offers a variety of models in both wireless and direct-connection configurations.
Wireless Amplifier Operation
Wilson’s mobile and in-building wireless amplifiers offer reliable cellular signal improvement with the convenience of no physical connection to the cell phone or cellular data card. And, multiple devices can be used simultaneously. The signal is received by the outside antenna from the cell site. It is then amplified and transmitted to the cell phone or cellular data card through the inside antenna. When the phone or data card transmits, the signal is received by the inside antenna, boosted by the amplifier and transmitted to the cell site through the outside antenna. Direct Connection Amplifier Operation. With a mobile or in-building direct connection amplifier, the signal from the cell site is received by the outside antenna, then amplified and passed on directly to the cell phone or data card through the attached adapter. When the phone or data card transmits, the signal is sent to the amplifier through the adapter then amplified and sent to the cell site through the outside antenna.
Wilson Electronics Amplifier Warranty
Wilson Electronics amplifiers are warranted for one (1) year against defects in workmanship and/or materials.
Wilson Electronics Antenna Warranty
Wilson Electronics antennas are warranted for ninety (90) days against defects in workmanship and/or materials. (Trucker antennas are warranted for one year.) Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase.
Amplifiers and antennas may also be returned directly to the manufacturer, at the consumer’s expense, with a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by Wilson Electronics. Wilson shall, at its option, either repair or replace the product and will pay for delivery of the repaired or replaced product back to the original consumer within the U.S.
These warranties do not apply to any products determined by Wilson Electronics to have been subjected to misuse, abuse, neglect or mishandling that alters or damages physical or electronic properties.
RMA numbers may be obtained by phoning Technical Support at 866-294-1660.
Direct Connection Bi-Directional Amplifier
Wilson’s direct connection amplifiers improve voice and data signal quality in both mobile and in-building applications using an adapter that connects directly to the cellular device.
Features
- Works on all generations of CDMA, TDMA, GSM and high-speed data technologies
- Advanced patent-pending circuitry automatically reduces gain to prevent oscillation or signal overload
- Power control logic ensures output power is within cellular standards
- Automatic gain control
- FCC and IC type accepted
Many models available:
Mobile Wireless Bi-Directional Amplifier
Wilson’s mobile wireless amplifiers provide motorists with improved signal range and voice/data quality without a physical connection to the cell phone or cellular data card.
Features
- Allows the use of multiple cellular devices within the vehicle
- Works on all generations of CDMA, TDMA, GSM and high-speed data technologies
- Advanced patent-pending circuitry automatically reduces gain to prevent oscillation or signal overload
- Power control logic ensures output power is within cellular standards
- Gain indicator lights
- FCC and IC type accepted
Many models available:
In-Building Wireless Bi-Directional Cellular Amplifiers
Wilson’s in-building wireless amplifiers are perfect for home or business environments in which maximum flexibility or the use of multiple cellular devices is required.
Features
- No physical connection to your cell phone or cellular data card
- Works on all generations of CDMA, TDMA, GSM and high-speed data technologies
- Advanced patent-pending circuitry automatically reduces gain to prevent oscillation or signal overload
- Power control logic ensures output power is within cellular standards
- Gain indicator lights
- FCC and IC type accepted
Many models available