Wilson Dome Antennas Dual Band

Wilson Dome Antenna Usage

The Wilson Dome Antenna is a directional antenna made to be mounted on the ceiling and can be used as the interior antenna with the Wilson Building Amplifier/Repeater. The Dome antenna features a built in ground plane.

Features:

Directional Antenna
Built-In Ground Plane
Mounting Hardware (3 bolts, 3 nuts, 3 wood screws) Included
For Fixed Installations

Wilson 301123 Dual Polarity Dome
Wilson Dome Dual Pol Dual Band Antenna with N Female Connectors

Specificatons

Frequency Range: 800-910 MHz / 1800-1990 MHz
Impedance: 50 Ohms / Both Bands
Antenna Gain: 5.2dBi
Beamwidth Hor. Plane: 360°
Beamwidth Ver. Plane: 150°
Max Power: 50 Watts
Polarization: Dual - Vertical and Horizontal
Ground Plane: Built in Ground Plane
VSWR 1.5 : 1
Connector: N Female
Diam: 7.72 in. / 19.6cm
Weight: 0.69 lb

Cable
Cable is NOT included with this antenna. Use of Wilson 9913-Equivalent Ultra Low Loss Cable with N Male connector recommended.

ONLY $59.95
Item: AE301123
Cable not included.

Wilson 301121 Dual Band Dome
Wilson Dome Vertically Pol Dual Band Antenna w/ N Female Connectors

Specificatons

Frequency Range: 800 - 910 MHz / 1800 - 1990MHz
Impedance: 50 Ohms / Both Bands
Antenna Gain: 2.5dbi
Max Power: 50 Watts
Polarization: Vertical
Ground Plane: Built in Ground Plane
Connector: N Female
Diam: 8 in. / 20.32cm
Weight: 1.4 lb

Cable
Cable is NOT included with this antenna. Use of Wilson 9913 Ultra Low Loss Cable with N Male connector recommended.

ONLY $59.95
Item: AE301121
Cable not included.

Wilson Electronics Antenna Cables

Wilson 9913-Equivalent Ultra Low Loss Cable
For Wilson Yagi and Panel Antennas
Wilson's ultra low loss 9913-Equivalent is the lowest loss cable we carry. They are specifically made for Wilson Yagi and Panel Antennas. It's also a thick and heavy cable that is hard to manipulate. If you're looking for the finest, least loss cable for your antenna application, this is it. These cables come with "N" Male connector crimped on each end.

Wilson 9913-Equivalent, 20ft (0.8 db loss) - $49.95 ADD TO CART
Wilson 9913-Equivalent, 30ft (1.2 db loss) - $59.95 ADD TO CART
Wilson 9913-Equivalent, 50ft (2.0 db loss) - $74.95 ADD TO CART
Wilson 9913-Equivalent, 75ft (3.0 db loss) - $89.95 ADD TO CART
Wilson 9913-Equivalent, 100ft (4.0 db loss) - $119.95 ADD TO CART

Wilson 2 Way Antenna Splitter - 800MHz
$74.95
The Wilson 800MHz 2 Way Splitter allows you to connect 2 internal antennas to the Bi-Directional Amplifier. Note that the signal will be split in half between the antennas. The ends on the splitter are all "N" type female so antennas require "N" type male connectors or adapters. For use with Wilson 800MHz and Nextel Building Repeaters.

Note: To attach the splitter to the bi-directional amp, you need the 2 foot Wilson 9913-Equivalent extension cable (AB951113 below). To connect an antenna with an FME Female Nipple connector to the splitter, you need and N Male / FME Male (AC971113) adapter (see below)

Wilson 2 Way Antenna Splitter - 1900MHz
$74.95
The Wilson 1900MHz 2 Way Splitter allows you to connect 2 internal antennas to the Bi-Directional Amplifier. Note that the signal will be split in half between the antennas. The ends on the splitter are all "N" type female so antennas require "N" type male connectors or adapters. For use with Wilson 1900MHz Building Repeaters.

Wilson 9913-Equivalent, 2 feet
$18.95
This two foot 9913-Equivalent cable is for patching in Wilson's Lightning Surge Protector to Wilson's Yagi Antenna or for connecting the Wilson Splitter to and Amplifier/Repeater with N connectors. The cable has "N" Male connectors crimped on each end.

N Male / FME Male Adapter
$8.95
Metal adapter with N type Male on one end and FME Male on the other. Can be used to convert N type Female connectors on Wilson Splitter to FME Male. Don't forget to buy 2, one for each antenna outlet. AC971113

Read Me: Attaching an antenna to your phone