Wilson RV Trucker Cellular Antenna
The perfect antenna for Recreational Vehicles. The Wilson RV Trucker
Antenna transfers all energy from your cellphone to the outside
antenna.
Greatly Reduces Disconnects, Drop Outs and Noise
Works on all cellular phone signals 800 and 1900 MHz. The RV Trucker eliminates all microwave energy radiating into the Head. Increases Your Cellphone's Range on Send & Receive
Wilson RV Trucker Features:
- Built-In Spring Reduces Impact Damage
- 5/8” x 7“ Threaded Mounting Rod Spans The Distance Between RV’s Roof And Headliner
- Angled Surface Mounting Kit Included
- 5/8” Threaded Brass Rod Can Be Easily Cut For Various Mounting Depths
- No Ground Plane Required
- Includes All Mounting Hardware
Works on All RV's (Motor Homes, 5Th Wheels, Trailers, Etc.)
Also works great on trucks, cars, boats, homes, etc.
Works on any surface - metal, fiberglass, wood, etc. No ground required.
RV - Installation
The included
mounting hardware is designed to span roofs with large gaps such
as the attics found in most RVs or small gaps - such as those
in a tent trailer.
Read RV Cellular Antenna Installaton Instructions (pdf file)
Wilson RV Trucker Antenna Diagram
Antenna extends 18 inches above the roof line and comes with 13.5 feet of RG-58 coax cable w/FME Female connector. Antenna whip now has spring base to absorb some impact without breaking. Note: An External Antenna Adapter is requied to connect directly to your phone.
Wilson RV Trucker Antenna
$49.95
301119
Radiation Patterns
H-Plane @ 850 MHz 5.12 dBi
H-Plane @ 1920 MHz 6.12 dBi
Trucker Antenna Specifications
- Frequency Range: 806-894 MHz, 1850-1990 MHz
- Impedance: 50 ohms / both bands
- Antenna Gain
- 5.12 dbi (3 dbd) 806 - 894 MHz
- 6.12 dbi (3 dbd)1850 - 1990 MHz
- Radiation: Omni
- Polarization: Vertical
- Wave
- 9 wave length 806-894 MHz
- 1.95 wave length 1850-1990 MHz
- Ground Plane: Built in Ground Plane
- Connecter: FME-Female
- Material: Whip - Stainless Steel
- Coax Cable: RG-58 / 13.5'
- Height: 18" (24" Including Threaded Mount)
- Mount: 5/8"
by 7" Threaded Mounting Rod
Wilson Vehicle Wireless Amplifier Kit
The
Wilson Dual Band Wireless Mobile Amplifier wireless extender that features the benefit of an external antenna and 3 watt amplifier without a physical connection to your phone. It even allows multiple phones to be used simultaneously.
The signal is received by the outside antenna from the cell site. It is then amplified and repeated to your cell phone from the inside antenna. When the phone transmits, the signal is received by the inside antenna, amplified, then repeated to the cell site via the outside antenna.
Wilson Direct Connect Cellular Power Booster
For better reception for an individual phone, try the Direct Connect Power Booster. It connects directly to your cell phone using an external antenna adapter. This 3 Watt Power Booster can increase your coverage up to 50 miles with up to 3 watts of power. It will greatly reduce disconnects, drop outs and noise as well as eliminating all microwave energy radiating into your head. Your phone will use less battery power with the improved signal giving you longer talk and standby times.
More Wilson Direct Connect Cellular PowerBooster Information
Wilson SignalBoost Cellular Power Booster
The Wilson SIGNALBOOST™ cell phone power booster improves cellular signals on both Cellular (824-894 MHz excluding iDen frequencies) and PCS (1850-1990 MHz) bands. The Wilson SignalBoost™ works with Verizon, US Cellular, Cellular One, Alltel, Bell Canada, Telus, Cingular, Sprint, T-Mobile and all other Cellular and PCS carriers. (Note: This unit will not work with Nextel iDen Frequencies)
No Device Specific External Antenna Adapter Required
Many wireless devices do not have RF ports that would enable you to connect an external antenna or power booster. The Wilson SignalBoost connects to your wireless phone or PC Card using the supplied universal connector. No other phone adapter is required. The connector is attached to your device using a velcro patch.